The data represents the relative expense of farm chemicals (herbicides, insecticides and fungicides) in the agricultural area of Alberta. It is an estimate of the degree to which crop production agriculture may contribute to surface or groundwater contamination.Agriculture production that makes greater use of herbicides, insecticides and pesticides in generally considered more intensive. Presenting the relative farm chemical expenses by SLC polygons reveals where the most intensive agricultural production in the province occurs. Chemical use is part of an equation to determine a measure of surface water quality risk. If an area is known to have certain risk factors that would affect not only surface, but groundwater quality as well, a higher chemical expense index ranking in that same area may be of concern. Where risks of surface or groundwater contamination exist, environmental farm planning can help to minimize them.

The Regional Air Quality Deterministic Prediction System FireWork (RAQDPS-FW) carries out physics and chemistry calculations, including emissions from active wildfires, to arrive at deterministic predictions of chemical species concentration of interest to air quality, such as fine particulate matter PM2.5 (2.5 micrometers in diameter or less). Geographical coverage is Canada and the United States. Data is available at a horizontal resolution of 10 km. While the system encompasses more than 80 vertical levels, data is available only for the surface level. The products are presented as historical, annual or monthly, averages which highlight long-term trends in cumulative effects on the environment.

The contaminants in fish database is a compilation of contaminant data analysed from fish tissue at the Fresh Water Institute from 1970 to 2005. Data include lab number, region, analysis, organs, species, lake, form (whole fish, headon dressed, headless dressed), weight, and length and contaminant concentrations. Total mercury was the predominant contaminant measured. Results were expressed as ppm or ppb based on the parameter analyzed. Concentrations are expressed based on wet weight.

The Forest Health Section currently monitors for two insects using pheromone traps. Pheromones are the chemical signal insects created by the insect for communication. Pheromones are used for numerous types of communication. In some species they are used to call other insects together (e.g. aggregation), in some they are used to repel others (e.g. anti-aggregation), in most insects these chemical signals are very specific and unique. Scientists have been able to identify and reproduce these chemicals in many species, allowing us to monitor species presence/absences and relative abundance in pest management. For botha) spruce budwormb) hemlock looperthe sex pheromone is emitted by the female to attract male moths. The Province places traps containing pheromone lures for both throughout the province.At the end of the season, the number of moths found in the traps give an indication of population trends for that season. These result support additional monitoring efforts such as the SBW fall population forecast. The pheromone traps are useful tools, but they only provide a partial picture on populations because in the case of both spruce budworm and hemlock looper the pheromone attract the male moths only.Each marker on the spruce budworm map represents three traps hung in a 40m spacing array, the value posted is the average of the three traps counted.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 4 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead, cadmium and arsenic and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 4 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and water pollution in general.Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 4 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead, cadmium and arsenic and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 4 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and water pollution in general.Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 4 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead, cadmium and arsenic and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 4 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and water pollution in general.Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

Digitization of long-term water chemistry data collected between 1920's - 1990's from lakes across Saskatchewan by the Saskatchewan Fisheries Research Laboratory. Samples were collected using methods from the Standard Methods for the Examination of Water and Wastewater (APHA, AWWA and WPCF). This data serves as a baseline for water quality.This dataset is a digitization from paper records of water chemistry data across Saskatchewan collected by the Saskatchewan Fisheries Research Laboratory. Data ranges from the 1920's to the 1990's and were sampled using methodes from the Standard Methods for the Examination of Water and Wastewater (American Public Health Association, American Water Works Association and Water Pollution Control Facility) This long-term water chemistry data serves as a baseline for water quality. Different variables of water chemistry are organized into individual fields. The units of measurement appear at the end of each field name. Due to the historical nature of the data some uncertainty exist in values.  Additonal notes on data: ND: no detection Trace: trace amounts Nil: zero NA: no data 

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 4 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead, cadmium and arsenic and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 4 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and water pollution in general.Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Ministry of Environment is responsible for Hazardous Substance and Waste Dangerous Goods Storage in Saskatchewan.Storing hazardous materials and waste dangerous goods in accordance with the Hazardous Substances and Waste Dangerous Goods Regulations (HSWDG), helps to avoid environmental impacts or risk to human health. To minimize these risks, the regulations ensure storage facilities are constructed, operated and decommissioned properly. The Ministry of Environment must approve the construction, alteration or expansion of a facility to handle hazardous substances or waste dangerous goods. All hazardous substance storage facilities require construction and operating approvals. Owners also require an approval from the Ministry of Environment to dismantle or decommission equipment used to store and handle hazardous substances and waste dangerous goods when they are no longer in use. For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free) at 1-800-567-4224,  centre.inquiry@gov.sk.ca or visit the hazardous materials storage page on saskatchewan.ca.