Home /Search
Search datasets
We have found 1,544 datasets for the keyword " environment and energy". You can continue exploring the search results in the list below.
Datasets: 106,149
Contributors: 42
Results
1,544 Datasets, Page 1 of 155
Clean power generating stations by type in megawatts (MW)
This Web Map Service depicts the location of clean electricity generating facilities by type of clean energy source and power generation capacity. Clean energy sources shown on the map include biomass, hydro, nuclear, solar, tidal and wind. The data comes from the provinces and territories, other federal departments and clean energy associations in Canada. The service is one of many themes mapped in the web mapping application Map of Clean Energy Resources and Projects (CERP) in Canada.
Power Plants, 100 MW or more - North American Cooperation on Energy Information
Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical, and/or fission energy into electric energy with an installed capacity of 100 megawatts or more.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)
Renewable Energy Power Plants, 1 MW or more - North American Cooperation on Energy Information
Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical into electric energy with an installed capacity of 1 Megawatt or more generated from renewable energy, including biomass, hydroelectric, pumped-storage hydroelectric, geothermal, solar, and wind.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)
Utilities and Communications
UTC - Utility and communication networks (utilitiesCommunication) Energy, water and waste systems, and communications infrastructure and services. For example, resources describing hydroelectricity; geothermal, solar, and nuclear sources of energy; water purification and distribution; sewage collection and disposal; electricity and gas distribution; data communication; telecommunication; radio; and communication networks.
Plans et rapports - Changements climatiques
Plans et rapports du ministère de l'Environnement
Drainage regions of Canada
This product provides the boundaries for the 25 drainage regions in Canada and the five ocean drainage areas. These drainage regions cover all of the area within the coastal boundaries of Canada.These files were produced by Statistics Canada, Environment, Energy and Transportation Statistics Division, 2009, special tabulation of data from Pearse, P.H., F. Bertrand and J.W. MacLaren, 1985, Currents of Change: Final Report of the Inquiry on Federal Water Policy, Environment Canada, Ottawa.
Canada's Forest Management Classification Web App, 2017
Interactive web application of Canada’s forest management classification, used in the Story Map of Forest Management in Canada, 2017.Interactive web application of Canada’s forest management classification, used in the Story Map of Forest Management in Canada, 2017. Explore Canada's forest management classification using this interactive web application. The application provides the following widgets or tools: The Bookmarks tool provides shortcuts to Canada's provinces and territories. The Query tool provides forest management classification areas for selected provinces and territories. The Infographic tool illustrates forest management classification areas. Source: This application shows forest management in Canada areas, as of June 2017, and includes data provided by Alberta Agriculture and Forestry; British Columbia Ministry of Forests; Manitoba Sustainable Development; Natural Resources Canada; New Brunswick Department of Energy and Resource Development; Newfoundland & Labrador Department of Fisheries and Land Resources; Northwest Territories Department of Environment and Natural Resources; Nova Scotia Department of Lands and Forestry; Ontario Ministry of Natural Resources and Forestry; Prince Edward Island Department of Communities, Land & Environment; Québec Ministère des Forêts, de la Faune et des Parcs; Saskatchewan Ministry of Environment; and Yukon Energy, Mines and Resources.
Tile Layer of Canada's Forested or Treed Areas, 2017
Tile layer of Canada's managed forested or treed areas and water used in the Story Map of Forest Management in Canada, 2017.This tiled layer data represents Canada's forested areas (& water) used in the Story Map of Forest Management in Canada, 2017. Canada's forest management classification map classifies all land and inland water areas. It does not differentiate forest areas from non-forest areas. Treed areas can be identified using a separate map layer that was derived using satellite data. Treed areas were used as a proxy for forested areas having a canopy closure of 25% or greater and a tree height of 5 m or greater. Source: Data provided by Alberta Agriculture and Forestry; British Columbia Ministry of Forests; Manitoba Sustainable Development; Natural Resources Canada; New Brunswick Department of Energy and Resource Development; Newfoundland & Labrador Department of Fisheries and Land Resources; Northwest Territories Department of Environment and Natural Resources; Nova Scotia Department of Lands and Forestry; Ontario Ministry of Natural Resources and Forestry; Prince Edward Island Department of Communities, Land & Environment; Québec Ministère des Forêts, de la Faune et des Parcs; Saskatchewan Ministry of Environment; and Yukon Energy, Mines and Resources.
Environmentally Impacted Sites
This map data displays environmentally impacted sites in Saskatchewan with location, confirmed substance and current status.The Ministry of Environment is responsible for regulating environmentally impacted sites in Saskatchewan to protect the environment and the public. An environmentally impacted site is an area of land or water that contains a substance that may cause or is causing an adverse effect.An adverse effect is an impairment of or damage to the environment or harm to human health caused by any chemical, physical or biological alterations or any combination of them.Please note: information may take up to 30 days to be updated and is subject to change at any time.For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free): 800-567-4224, centre.inquiry@gov.sk.ca or visit the environmentally impacted sites page on Saskatchewan.ca. Terms and definitionsObject ID: An internal GeoHub record ID number. This number can be ignored. Case ID: The Case ID is the ministry’s file number – a unique identifier. It is NOT the date the site became impacted. Status – The stages of management for an environmentally impacted site. Notification: The ministry has received notification that pollutants have been discovered at the site. The concentration of this pollutant exceeds the threshold outlined in the Saskatchewan Environmental Code and must be reported. The pollutants may cause an adverse effect to the environment or human health. The ministry has been made aware of this and has determined that the site is an environmentally impacted site. Assessment: The site is currently undergoing, or has recently completed, analysis to determine the cause, nature or extent of potential or existing adverse effect (e.g. a Phase 2 Environmental Site Assessment). Corrective Action Plan: The site is currently undergoing, or has recently completed, activity that aims to prevent, minimize, mitigate, remedy or reclaim adverse effects (e.g. removal of impacts by excavation). Closure: This is a historical status term for environmentally impacted sites that is no longer used. The Notice of Site Condition status replaces the former status of Closure. It indicates that corrective actions have been completed at the site, endpoints have been achieved and an updated environmental status of the site has been provided to the ministry. However, no application has been made for a Notice of Site Condition certificate. Notice of Site Condition: The ministry is satisfied that an acceptable risk level exists for the area of the site addressed in the corrective action plan. Confirmed substance: The substances of concern at the site. Examples that may cause an adverse effect are petroleum hydrocarbons, toxic metals, air pollutants, acids and solvents.
Canadian Wind Turbine Database
The Canadian Wind Turbine Database contains the geographic location and key technology details for wind turbines installed in Canada.Latest update includes: Wild Rose 2, commissioned on Sept. 16, 2025This dataset was jointly compiled by researchers at CanmetENERGY-Ottawa and by the Centre for Applied Business Research in Energy and the Environment at the University of Alberta, under contract from Natural Resources Canada. Additional contributions were made by the Department of Civil & Mineral Engineering at the University of Toronto.Note that total project capacity was sourced from publicly available information, and may not match the sum of individual turbine rated capacity due to de-rating and other factors. The turbine numbering scheme adopted for this database is not intended to match the developer’s asset numbering.This database will be updated in the future. If you are aware of any errors, and would like to provide additional information, or for general inquiries, please use the contact email address listed on this page.
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback