Area Based Management Plans (ABMP) are designated areas for the purposes of environmental protection. It must consider the impact of point and non-point source of waste, cumulative impact of the wastes, environmental management objectives and outcomes for the designated area, and ongoing monitoring and reporting.

The Air and Watershed Resource Management Contacts and Boundaries dataset is comprised of all the polygons that represent the Air and Watershed Stewardship districts and the manager to contact with questions or concerns about environmental framework implementation and management response. This dataset was created to lend support to the Regulatory Assurance Division.

Ecosection boundaries with percent protected, number of overlapping protected areas and other attributes added as a result of geoprocessing in the Protected Area System Overview (PASO) application. Protected area and park representation by ecosection provides a landscape context for natural resource planning processes such as; management plans, land use zoning, environmental risk assessment, landscape analysis, habitat supply, and management of high priority species. Ecosections are distinguished from each other by enduring characteristics such as minor physiographic and macroclimatic or oceanographic variations. For more information on ecosections and the Ecoregion Classification System see: http://www.env.gov.bc.ca/ecology/ecoregions/index.html. For important warnings about using this data for spatial analysis see the Data Quality section of the metadata

Caribou habitat management areas identify zones ("tiers") with similar importance to caribou, potential risks and primary strategies for caribou conservation.These Final Caribou Habitat Management Areas (CHMAs) are based on known woodland caribou use and habitat potential mapping; in addition, levels of both human-caused and wildfire disturbances were also taken into consideration. Tier 1 areas were selected because they include high-moderate caribou habitat potential with high levels of observed caribou use and low levels of human-caused disturbance. Tier 2 areas were selected because they include areas of high-moderate woodland caribou habitat potential with observed use and higher levels of wildfire and human-caused disturbance. Tier 3 areas provide general habitat and maintain habitat connectivity between Tier 1 and Tier 2 areas. These areas are not permanent: they will be updated as habitat conditions, land use and caribou populations change over time. Different strategies have been developed for each Tier based on their stated management objectives and relative importance to and known use by caribou, current habitat condition and potential risks.  A two page overview of the SK2 East Woodland Caribou Range Plan and the CHMAs can be viewed here: https://publications.saskatchewan.ca/api/v1/products/127215/formats/149989/download Find out more about woodland caribou and what the province is doing to manage their habitat and protect their populations: https://www.saskatchewan.ca/business/environmental-protection-and-sustainability/wildlife-and-conservation/wildlife-species-at-risk/woodland-caribou-program

Water Stewardship Division, Water Management administrative areas. Water Precincts are a jurisdictional area within a Water District

Species distribution models (SDMs) are tools that combine species observations of occurrence, abundance, or biomass with environmental variables to predict the distribution of a species in unsampled locations. To produce accurate predictions of occurrence, abundance or biomass distribution, a wide range of physical and/or biological variables is desirable. Such data is often collected over limited or irregular spatial scales, and require the application of geospatial techniques to produce continuous environmental surfaces that can be used for modelling at all spatial scales. Here we provide a review of 102 environmental data layers that were compiled for the entire spatial extent of Fisheries and Oceans Canada’s (DFO) Maritimes Region. Variables were obtained from a broad range of physical and biological data sources and spatially interpolated using geostatistical methods. For each variable we document the underlying data distribution, provide relevant diagnostics of the interpolation models and an assessment of model performance, and present the final standard error and interpolation surfaces. These layers have been archived in a common (raster) format at the Bedford Institute of Oceanography to facilitate future use. Based on the diagnostic summaries in this report, a subset of these variables has subsequently been used in species distribution models to predict the distribution of deep-water corals, sponges, and other significant benthic taxa in the Maritimes Region.Cite this data as: Beazley, Lindsay; Guijarro, Javier, Lirette; Camille; Wang, Zeliang; Kenchington, Ellen (2020). Characteristics of Environmental Data Layers for Use in Species Distribution Modelling in the Maritimes Region. Published July 2023. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/34a917cb-a0e3-403c-91c7-af3dc20628b1

This new data class brings over data from the Waste Management Information System (WMIS), which is a Microsoft Access based database used by the Ministry of Natural Resources (MNR) to track Waste Management Sites. This was married with the spatial data from Waste Disposal Sites where possible Different Waste Disposal Site types collected by the Ministry of Natural Resources include: * Compost Disposal * Hazardous Waste Disposal * Household Waste Disposal * Industrial Waste Disposal * Septic Drying Bed * Septic Field * Sewage Disposal * Tile Bed * Transfer Station This product requires the use of geographic information system (GIS) software.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 4 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead, cadmium and arsenic and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 4 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and water pollution in general.Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

This map data displays environmentally impacted sites in Saskatchewan with location, confirmed substance and current status.The Ministry of Environment is responsible for regulating environmentally impacted sites in Saskatchewan to protect the environment and the public.  An environmentally impacted site is an area of land or water that contains a substance that may cause or is causing an adverse effect.An adverse effect is an impairment of or damage to the environment or harm to human health caused by any chemical, physical or biological alterations or any combination of them.Please note: information may take up to 30 days to be updated and is subject to change at any time.For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free): 800-567-4224, centre.inquiry@gov.sk.ca or visit the environmentally impacted sites page on Saskatchewan.ca. Terms and definitionsObject ID: An internal GeoHub record ID number. This number can be ignored.  Case ID: The Case ID is the ministry’s file number – a unique identifier. It is NOT the date the site became impacted.  Status – The stages of management for an environmentally impacted site.   Notification: The ministry has received notification that pollutants have been discovered at the site.  The concentration of this pollutant exceeds the threshold outlined in the Saskatchewan Environmental Code and must be reported. The pollutants may cause an adverse effect to the environment or human health. The ministry has been made aware of this and has determined that the site is an environmentally impacted site. Assessment: The site is currently undergoing, or has recently completed, analysis to determine the cause, nature or extent of potential or existing adverse effect (e.g. a Phase 2 Environmental Site Assessment). Corrective Action Plan: The site is currently undergoing, or has recently completed, activity that aims to prevent, minimize, mitigate, remedy or reclaim adverse effects (e.g. removal of impacts by excavation). Closure: This is a historical status term for environmentally impacted sites that is no longer used. The Notice of Site Condition status replaces the former status of Closure. It indicates that corrective actions have been completed at the site, endpoints have been achieved and an updated environmental status of the site has been provided to the ministry. However, no application has been made for a Notice of Site Condition certificate.  Notice of Site Condition: The ministry is satisfied that an acceptable risk level exists for the area of the site addressed in the corrective action plan. Confirmed substance: The substances of concern at the site. Examples that may cause an adverse effect are petroleum hydrocarbons, toxic metals, air pollutants, acids and solvents.

This feature class represents Manitoba's Forest Management Unit (FMU) boundaries.Forest Management Units (FMU's) define a forested area with common forest conditions that are managed in a similar manner. Forest Sections are comprised of FMU's. Forest inventories within Forest Management Units are analysed to determine allowable harvest limits of softwood and hardwood tree species within each Forest Management Unit. Version 3: The southern portion of FMU 67 within the Highrock Forest Section has been adjusted to align with base features captured in 2009. Additionally, an 11 hectare portion of the Saskatchewan River Forest Section (FMU 59) has been added to the Highrock Forest Section. Version 4: The northern portion of FMU 68 along the Rail Haul within the Highrock Forest Section has been adjust so that the boundary falls within water only. Additionally, version 4 splits the 'White Zone' forest section (FMU 76) by ecozones, creating FMU 76 (Taiga Shield), FMU 77 (Southern Arctic), FMU 78 (Hudson Plain) and FMU 79 (Boreal Shield). Version 4 is dated February 8, 2013. Fields Included: OBJECTID: Sequential unique whole numbers that are automatically generated . MANAGEMENT_UNIT_NUMBER : Management Unit (MU) number . S ECTION : Forest section number . SECTION_NAME : Forest section name .