This dataset shows the locations of ignition points for forest fires less than 40 hectares in size. Fires that grow larger than 40 hectares are mapped in the [Fire Disturbance Area](https://data.ontario.ca/dataset/fire-disturbance-area-firedstb) dataset. The [Forest Fire Info Map](https://www.gisapplication.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-US) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

A Fire Disturbance Area represents the mapped exterior perimeter of a forest fire. Mapping is derived from a variety of sources, such as GPS points and digitized paper maps. Prior to 1998, only fires greater than 200 hectares were mapped. Since 1998, fires greater than 40 hectares have been mapped. If adequate mapping exists for fires less than 40 hectares in size, they will be included in this data class. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

Fire perimeters for this year's forest fires in Ontario. Fire perimeters are illustrations only and may not be exact in relation to actual physical locations. The Ontario Ministry of Natural Resources does not capture perimeters for every fire. Fire perimeters are not captured in real time; each capture depends on available resources and weather conditions and may be several days old. During fire season, perimeter data is updated every 24 hours as improved information becomes available; therefore, reported fire size may fluctuate from day to day. The Ontario Ministry of Natural Resources shall not be liable in any way for the use of, or reliance upon this information. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-CA) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

A national map of Canadian Fire Behaviour Prediction (FBP) Fuel Types (FT) developed from public data sources. The resolution of the raster grid is 30m, classified from the Spatialized Canadian National Forest Inventory (SCANFI) dataset, ecozones of Canada, and the National Burned Area Composite (NBAC). The purpose of the dataset is to characterize Canadian forests into fuel types for use in Fire Behaviour Prediction calculations as well as for situational awareness of national fire potential.

A National Forest Fire Behaviour Prediction (FBP) Fuel Type (FT) layer, representing fuel types as described in the Canadian Forest Fire Danger Rating System (CFFDRS) Canada-wide. This data is developed through the Spatialized Canadian National Forest Inventory (SCANFI) dataset, specifically the updated SCANFI version 2.0. The Fuel Type layer is produced at variable resolution to best meet the needs of users: 30m (default) and 100m (ideal for fire growth modelling).The purpose of this dataset is to characterize Canadian forests into Fuel Types for use in various applications, including wildland fire management, research, fuel management, and more. This layer is primarily developed to support national scale applications and uses but can be utilized for localized landbases and adapted as required.This data represents the most up-to-date national product and is updated annually prior to the start of the fire season to incorporate burned area and additional data from the previous year. This data will be updated annually and published online by April 30th of each year.Note: In this product Slash fuel types (S-1, S-2, and S-3) are not represented. Conifer Plantation (C-6) is not represented. Raster Grid Value 13 represents vegetated fuels without an effective match to an existing FBP Fuel Type under this ruleset. Grid Value 11 (corresponding to D-1 Leafless Aspen) is assumed to represent true Deciduous fuels as described in the FBP system.

Facilities used by the Ministry of Natural Resources' Aviation Forest Fire and Emergency Services (AFFES) branch. This dataset is used to support aviation forest fire and AFFES business operations.

This dataset shows the boundaries of the province's six fire management zones that existed prior to 2014 in which most forest fires received the same type of response. These management zones were based on: * common forest and forest fire management objectives * land use * density of values at risk * fire load * forest ecology The 2014 Wildland Fire Management Strategy moved from a zone-based approach to one where each wildland fire is assessed and receives an appropriate response according to the circumstances and condition of the fire.

Get data on forest fires, compiled annually for the National Forestry Database [The National Forestry Database](http://nfdp.ccfm.org/en/index.php) includes national forest data and forest management statistics to seve as a credible, accurate and reliable source of information on forest management and its impact on the forest resource. Forest fire data is grouped into eight categories, which are further broken down by geographic location. These include: * number of fires by cause class and response category * area burned by cause class and response category * number of fires by month and response category * area burned by month and response category * number of fires by fire size class and response category * area burned by fire size class and response category * area burned by productivity class, stocking class, maturity class and response category * other fire statistics, such as property losses

Hazardous forest types for wildland fire means forest types assessed as being associated with the risk of high to extreme wildland fire. This data is intended to help inform where further assessment is required and is to be used in conjunction with guidance from the Ministry of Natural Resources and Forestry .

Fire weather refers to weather conditions that are conducive to fire. These conditions determine the fire season, which is the period(s) of the year during which fires are likely to start, spread and do sufficient damage to warrant organized fire suppression.The length of fire season is the difference between the start- and end-of-fire-season dates. These are defined by the Canadian Forest Fire Weather Index (FWI; http://cwfis.cfs.nrcan.gc.ca/) start-up and end dates. Start-up occurs when the station has been snow-free for 3 consecutive days, with noon temperatures of at least 12°C. For stations that do not report significant snow cover during the winter (i.e., less than 10 cm or snow-free for 75% of the days in January and February), start-up occurs when the mean daily temperature has been 6°C or higher for 3 consecutive days. The fire season ends with the onset of winter, generally following 7 consecutive days of snow cover. If there are no snow data, shutdown occurs following 7 consecutive days with noon temperatures lower than or equal to 5°C.Historical climate conditions were derived from the 1981–2010 Canadian Climate Normals. Future projections were computed using two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: the fire season length across Canada for a reference period (1981-2010).