These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

A Township is a land subdivision in Ontario. This information was captured through the Ontario Base Mapping Program, is maintained by the Ministry of Natural Resources and distributed through Geospatial Ontario (GEO) Warehouse. The spatial accuracy for some of the townships was improved through the Ontario Parcel, Township Realignment and Township Improvement projects. Improvements may include: * road allowance widths * spatial changes to better represent where the township boundaries are located * more consistent concession names Materials used to improve the location of township lines may include: * township Improvement plots * survey information i.e. retracements * original township plans * surveys notes * the physical features e.g. fence lines in the corporate editing environment * water bodies * GPS Ontario Road Network geometry This product requires the use of geographic information system (GIS) software.

Game Preserve's in Saskatchewan.The Saskatchewan Game Preserves are described in Part III of the Wildlife Management Zones and Special Areas Boundaries Regulations (WMZSABR). They are constituted as areas for protecting, propagating, managing, controlling, regulating or enhancing wildlife or its habitat.

The Metis Settlement is a dataset comprised of all the polygons that represent Metis Settlements lands in Alberta. Metis Settlements are lands set apart by provincial legislation for the use and benefit of the members of the eight Metis Settlements in Alberta. The legal title of these lands rests with the Metis Settlements General Council, a legislated-body that holds the fee simple interest on all Metis settlement lands, equivalent to full ownership of the land, with certain limited rights reserved for the Crown. The provincial government has primary jurisdiction over these lands and the people living on them.

The spatial representation for current Timber Supply Areas (TSA). A Timber Supply Area is a designated area established by the Ministry in order to practice sound, integrated, resource management principles to improve the allowable annual cuts. TSAs were originally defined by an established pattern of wood flow from management units to the primary timber-using industries. They are the primary unit for allowable annual cut (AAC) determination.

The Settlement dataset is comprised of all the polygons that represent Settlements in Alberta. A settlement is an area of land that was surveyed prior to the Third System of Survey and does not normally follow the ATS grid.

This boundary layer shows all Special Conservation Areas (SCA) in Manitoba.The purpose of this dataset is to show the boundaries of all Special Conservation Areas (SCA) in Manitoba, as designated by the Designation of Wildlife Lands Regulation (171/2001) under The Wildlife Act (C.C.S.M. c. W130). Special Conservation Areas are designated to conserve and protect particular species and habitats throughout Manitoba. The Use of Wildlife Lands Regulation (77/99) determines what activities are prohibited within each Special Conservation Area. Boundaries are drawn based on CAD files from the official Director of Surveys Plan stated in the regulation.Fields included (Alias (Field Name): Field description.)FID (FID): Sequential unique whole numbers that are automatically generatedName (NAME): Special Conservation Area nameD of S Plan (DofS): Director of Surveys plan numberArea_HA (AREA_HA): Area in HectaresSpecies (SPECIES): Species name

This dataset shows the location of the distribution of uranium deposits for the Province of Saskatchewan.This dataset shows the uranium deposits for the Province of Saskatchewan and is designed for the Resource Map of Saskatchewan. Mapping in support of the dataset includes years of field observations which were then compiled and integrated into this dataset. The data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule.