Current conditions and forecasts for selected Canadian cities. Raw XML data are used to generate each city page on the Environment Canada web site https://www.weather.gc.ca/.

A bear management area is a polygon feature that identifies a ministry-regulated boundary used to manage, administer and enforce the licensed black bear hunting tourism program.

This map data displays environmentally impacted sites in Saskatchewan with location, confirmed substance and current status.The Ministry of Environment is responsible for regulating environmentally impacted sites in Saskatchewan to protect the environment and the public.  An environmentally impacted site is an area of land or water that contains a substance that may cause or is causing an adverse effect.An adverse effect is an impairment of or damage to the environment or harm to human health caused by any chemical, physical or biological alterations or any combination of them.Please note: information may take up to 30 days to be updated and is subject to change at any time.For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free): 800-567-4224, centre.inquiry@gov.sk.ca or visit the environmentally impacted sites page on Saskatchewan.ca. Terms and definitionsObject ID: An internal GeoHub record ID number. This number can be ignored.  Case ID: The Case ID is the ministry’s file number – a unique identifier. It is NOT the date the site became impacted.  Status – The stages of management for an environmentally impacted site.   Notification: The ministry has received notification that pollutants have been discovered at the site.  The concentration of this pollutant exceeds the threshold outlined in the Saskatchewan Environmental Code and must be reported. The pollutants may cause an adverse effect to the environment or human health. The ministry has been made aware of this and has determined that the site is an environmentally impacted site. Assessment: The site is currently undergoing, or has recently completed, analysis to determine the cause, nature or extent of potential or existing adverse effect (e.g. a Phase 2 Environmental Site Assessment). Corrective Action Plan: The site is currently undergoing, or has recently completed, activity that aims to prevent, minimize, mitigate, remedy or reclaim adverse effects (e.g. removal of impacts by excavation). Closure: This is a historical status term for environmentally impacted sites that is no longer used. The Notice of Site Condition status replaces the former status of Closure. It indicates that corrective actions have been completed at the site, endpoints have been achieved and an updated environmental status of the site has been provided to the ministry. However, no application has been made for a Notice of Site Condition certificate.  Notice of Site Condition: The ministry is satisfied that an acceptable risk level exists for the area of the site addressed in the corrective action plan. Confirmed substance: The substances of concern at the site. Examples that may cause an adverse effect are petroleum hydrocarbons, toxic metals, air pollutants, acids and solvents.

This dataset represents the locations of licenced and permitted pits and quarries regulated by the Ministry of Natural Resources and Forestry under the Aggregate Resources Act, R.S.O. 1990. Aggregate site data has been divided into active and inactive sites. Active sites may be further subdivided into partial surrenders. In partial surrenders, defined areas of a site are inactive while the rest of the site remains active. The data includes: * site location and size * licensee name * approval type (licence or permit) * operation type (pit or quarry) * maximum annual tonnage limit * the MNRF district responsible for the site Use our interactive [pits and quarries map](https://www.ontario.ca/page/find-pits-and-quarries) to find active sites. This data does not include [aggregate sites regulated by the Ministry of Transportation](https://data.ontario.ca/dataset/ministry-of-transportation-aggregate-sites).

Game Management Areas (GMAs) are legal boundaries that define an area within which big game management objectives can be met through the setting of area-specific regulations. In other words, GMAs are used to manage Yukon wildlife species. GMAs are a combination of Game Management Zone (GMZ or Zone) and Game Management Subzone (GMS or Subzone). There are 443 GMAs in the Yukon which are grouped together into 11 Zones. In general, Zone boundaries follow highway centre lines and Subzone boundaries follow creeks and rivers. In effect, GMAs delineate mountain blocks, which reflects their original use as sheep management units. Despite this original intent, GMAs are now used to manage all species of Yukon wildlife. With the exception of National Parks, the entire Yukon is covered by GMAs. This data was built using the 1:250,000 National Topographic Data Base (NTDB) as the digitizing base.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@y](mailto:geomatics.help@yukon.ca)[ukon.ca](mailto:geomatics.help@yukon.ca)

The atlas provides printable maps, Web Services and downloadable data files representing seabirds at-sea densities in eastern Canada.The information provided on the open data web site can be used to identify areas where seabirds at sea are found in eastern Canada. However, low survey effort or high variation in some areas introduces uncertainty in the density estimates provided. The data and maps found on the open data web site should therefore be interpreted with an understanding of this uncertainty.Data were collected using ships of opportunity surveys and therefore spatial and seasonal coverage varies considerably. Densities are computed using distance sampling to adjust for variation in detection rates among observers and survey conditions. Depending on conditions, seabirds can be difficult to identify to species level. Therefore, densities at higher taxonomic levels are provided. more details in the document: Atlas_SeabirdsAtSea-OiseauxMarinsEnMer.pdf.By clicking on "View on Map" you will visualize a example of the density measured for all species combined from April to July - 2006-2020. ESRI REST or WMS map services can be added to your web maps or opened directly in your desktop mapping applications. These are alternatives to downloading and provide densities for all taxonomical groups and species as well as survey effort.

A list of the site series ecological units of the current biogeoclimatic ecosystem classification. It is consistent with the biogeoclimatic subzone/variant map (BEC_BIOGEOCLIMATIC_POLY, version 13.1, July 8, 2026). Site series are subdivisions of the biogeoclimatic subzone/variant, and describe sites capable of producing the same mature or climax vegetation unit (plant association or sometimes, subassociation). Site series are described in the Regional Field Guides to Site Identification. Site and soil conditions, and the vegetation community, are used to identify site series

This 'Current' spatial data layer is publicly accessible, contains the most current Non-Legal Old Growth Management Area (OGMA) polygons and excludes any sensitive information. This data represents spatially defined areas of old growth forest that are identified during landscape unit planning or an operational planning process. Forest licensees are not required to follow direction provided by non-legal OGMAs when preparing FSPs, and may choose to manage required old growth biodiversity targets in other ways. OGMAs, in combination with other areas where forestry development is prevented or constrained, are used to achieve biodiversity targets. Please see the Additional Information and Object Description Comments below.

Geotechnical data comes from investigations performed by geotechnical engineers to obtain information on the physical properties of soil and rock underlying a site for proposed structures. The investigations include surface exploration and subsurface exploration of a site. In addition, site investigations will often include subsurface sampling and laboratory testing of the soil samples retrieved. The digging of test pits and trenching may also be used to learn about soil conditions at depth. Geotechnical data is relevant to our permafrost database as it contains logs of ice encountered at various depths.Yukon Geological Survey has been compiling geotechnical data from various organizations and branches. The main datasets being compiled are the following:Northern Climate ExchangeCommunity Services, Land BranchEnergy Mines and Resources, Abandoned MinesTransportation Engineering BranchAlaska Highway Borehole DatabaseAgriculture soil profilesDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Feature point layer showing COVID-19 rapid antigen test kit distribution sites in Manitoba.Feature point layer showing locations of distribution sites that currently have COVID-19 rapid antigen test kits available in Manitoba. The main purpose of this data is to provide the public with the hours of operation for these sites. Distributors include pharmacies, retail stores, and community libraries. This data is populated by Manitoba Shared Health and is updated as needed. This feature layer is used in the Manitoba COVID-19 Rapid Antigen Test Kit Availability Map and Manitoba COVID-19 Rapid Antigen Test Kit Availability application. For more information on Manitoba’s response to COVID-19, please visit the following site: https://www.gov.mb.ca/covid19/index.html Fields included [Alias (Field Name): Field description] Site Category (Site_Category): Indicates whether the site is a retail business, pharmacy, or community library Site Name (Site_Name): Official business name of the site  Address (Address): Street address of the site  City or Town (City_or_Town): City or town in which the site is located Postal Code (Postal_Code): Postal code that corresponds with the street address of the site  Phone (Phone): Telephone number for the site French Service (French_Service): Indicates whether a site self-identified as having services available in French; if unknown, value is null   Health Authority (Health_Authority): Name of the regional health authority where the site is located Hours of Operation (Hours_of_Operation): Listing of days and times that the site is open to the public Alt Hours Start (Alt_Hours_Start): Start date of when alternate hours are in effect Alt Hours End (Alt_Hours_End): End date of when alternate hours are in effect Alternate Hours of Operation (Alternate_Hours_of_Operation): Listing of alternate days and times that the site is open to the public Latitude (Latitude): Latitudinal coordinate of the site Longitude (Longitude): Longitudinal coordinate of the site