Regional Deterministic Air Quality Analysis (RDAQA) is an objective analysis of surface pollutants that combines numerical forecasts from the Regional Air Quality Deterministic Prediction System (RAQDPS) with hourly observations from various monitoring networks in North America, including the Canadian measurement networks operated by the provinces, territories and certain cities, as well as the various American networks in the context of the AIRNow program administered by US/EPA (US Environmental Protection Agency). RDAQA analysis provides the best description of current air quality conditions, and is used to inform the public, meteorologists in the various Environment and Climate Change Canada forecasting offices, Health Canada and other users about the distribution of air pollutants near the ground, and the performance of forecasting models. Each hour, a preliminary product is available approximately one hour after the observation measurement time, while final and Firework products are available approximately two hours after the measurement time. The preliminary and final products contain analysis of the chemical constituents O3, SO2, NO, NO2, PM2.5 (fine particles with diameters of 2.5 micrometers or less) and PM10 (coarse particles with diameters of 10 micrometers or less), while the Firework product contains analysis of PM2.5 and PM10.

Herring Permanent Spawn Transects (geodatabase) - used for herring spawn survey program and spatial analysis/presentation of spawn data from Herring Stock Assessment Database (including creation of spawn polygons).

The Canada Nature Fund for Aquatic Species at Risk (CNFASAR) is a contribution program that focuses on providing funding for recovery and threat mitigation activities in nine priority places and to address two marine threats to aquatic species at risk. The Priority Places and Marine Threats layer supports CNFASAR by delineating the location of the places and threats.The Canada Nature Fund for Aquatic Species at Risk (CNFASAR) supports applicants in the design and delivery of stewardship projects. These projects support the recovery and protection of aquatic species at risk. DFO has identified 2 priority marine threats and 9 priority places as the focus for projects funded by CNFASAR, these areas are included in this dataset.

The spatial representation for current Timber Supply Areas (TSA). A Timber Supply Area is a designated area established by the Ministry in order to practice sound, integrated, resource management principles to improve the allowable annual cuts. TSAs were originally defined by an established pattern of wood flow from management units to the primary timber-using industries. They are the primary unit for allowable annual cut (AAC) determination.

A Linear Safety Feature is one of a number of various appliances/appurtenances that have been installed or constructed either alongside or as an integral part of the road infrastructure to reduce the severity or potential of accidents. It is a Linear feature

The spatial representation for an Inventory Region or Compartment. Established by the Resource Inventory Branch, Inventory Regions are large drainages encompassing groups of small drainages also known as compartments. These were once used for planning purposes, similar to the current Planning Cells. They are now maintained in the files as reference for many administration boundaries

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).

The spatial planning framework for Canada's national network of Marine Protected Areas (MPAs) is comprised of 13 ecologically defined bioregions that cover Canada's oceans and the Great Lakes. Note that the geographic boundaries for the bioregions are fuzzy and may change based on ecosystemic conditions.Detailed descriptions and discussions on the federal network of marine bioregions can be found in: - DFO. 2009. Development of a Framework and Principles for the Biogeographic Classification of Canadian Marine Areas. DFO Can. Sci. Advis. Sec. Sci. Advis. Rep. 2009/056 (http://www.dfo-mpo.gc.ca/csas-sccs/publications/sar-as/2009/2009_056-eng.htm);- DFO. 2010. Proceedings of a National Science Advisory Process to Provide Guidance on the Development of a Framework and Principles for the Biogeographic Classification of Canadian Marine Areas; 15-16 June 2009. DFO Can. Sci. Advis. Sec. Proceed. Ser. 2009/039. (http://www.dfo-mpo.gc.ca/csas-sccs/publications/pro-cr/2009/2009_039-eng.htm); and - National Framework for Canada's Network of Marine Protected Areas (http://www.dfo-mpo.gc.ca/oceans/publications/mpanf-cnzpm/page01-eng.html).

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

Satellite-based forest area consistent with FAO definitions for Canada. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). The forest area is based on the Food and Agricultural Organization of the United Nations (FAO) definition. The FAO definition incorporates land use, whereby trees removed by fire and harvesting for instance, remain forest as the trees will return. The included map displays the current forest cover for year as noted (i.e. 2022), plus the satellite-based temporally informed forest area where tree cover has been temporarily lost due to stand replacing disturbances (i.e., fire, harvest). For an overview of the methods, data, image processing, as well as information on accuracy assessment see Wulder et al. (2020).Open Access: Wulder, M.A., T. Hermosilla, G. Stinson, F.A. Gougeon, J.C. White, D.A. Hill, B.P. Smiley. (2020). Satellite-based time series land cover and change information to map forest area consistent with national and international reporting requirements. Forestry: An International Journal of Forest Research 93(3), 331-34, https://doi.org/10.1093/forestry/cpaa0063 . ( Wulder et al. 2020)