Average of the hourly Direct Normal Irradiance (DNI) over 17 years (1998-2014). Data extracted from the National Solar Radiation Database (NSRDB) developed using the Physical Solar Model (PSM) by National Renewable Energy Laboratory ("NREL"), Alliance for Sustainable Energy, LLC, U.S. Department of Energy ("DOE").The current version of the National Solar Radiation Database (NSRDB) (v2.0.1) was developed using the Physical Solar Model (PSM), and offers users the solar resource datasets from 1998 to 2014). The NSRDB comprises 30-minute solar and meteorological data for approximately 2 million 0.038-degree latitude by 0.038-degree longitude surface pixels (nominally 4 km2). The area covered is bordered by longitudes 25° W on the east and 175° W on the west, and by latitudes -20° S on the south and 60° N on the north. The solar radiation values represent the resource available to solar energy systems. The AVHRR Pathfinder Atmospheres-Extended (PATMOS-x) model uses half-hourly radiance images in visible and infrared channels from the GOES series of geostationary weather satellites, a climatological albedo database and mixing ratio, temperature and pressure profiles from Modern Era-Retrospective Analysis (MERRA) to generate cloud masking and cloud properties. Cloud properties generated using PATMOS-x are used in fast radiative transfer models along with aerosol optical depth (AOD) and precipitable water vapor (PWV) from ancillary sources to estimate Direct Normal Irradiance (DNI) and Global Horizontal Irradiance (GHI). A daily AOD is retrieved by combining information from the MODIS and MISR satellites and ground-based AERONET stations. Water vapor and other inputs are obtained from MERRA. For clear sky scenes the direct normal irradiance (DNI) and GHI are computed using the REST2 radiative transfer model. For cloud scenes identified by the cloud mask, Fast All-sky Radiation Model for Solar applications (FARMS) is used to compute the GHI. The DNI for cloud scenes is then computed using the DISC model. The data in this layer is an average of the hourly GHI over 17 years (1998-2014). NOTE: The Geographical Information System (GIS) data and maps for solar resources for Global Horizontal Irradiance (GHI) and Direct Normal Irradiance (DNI) were developed by the U.S. National Renewable Energy Laboratory (NREL) and provided for Canada as an estimate. At present, neither the NREL data, nor the Physical Solar Model (PSM) on which the NREL data is based, have been either assessed or validated for the particular Canadian weather applications. A Canadian GHI map developed by the department of Natural Resources Canada (NRCan) is based on the State University of New York (SUNY) model and has been assessed and validated for the particular Canadian weather applications. The Canadian GHI map is available at http://atlas.gc.ca/cerp-rpep/en/.

Distribution of kelp beds in coastal British Columbia. Attribute information includes relative abundance, species, biomass and density of the beds. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

DFO Maritimes Region has conducted a cumulative human impact mapping analysis for the Scotian Shelf-Bay of Fundy management area to support ongoing Marine Spatial Planning initiatives (Murphy et al. 2024). Cumulative human impact mapping (CIM) combines spatial information on human activities and habitats with a matrix of vulnerability weights, into an intuitive relative ‘cumulative impact score’ that shows where cumulative human impacts are greatest and least. To map cumulative impacts in DFO’s Maritimes Region, a recently developed ecosystem vulnerability assessment for Atlantic Canadian waters (Murray et al. 2022) was combined with spatial information on 21 different habitat types and 45 human activities across five different sectors (climate change, land-based, marine-based, coastal, commercial fishing) following the methodology from Halpern et al. (2008). An uncertainty analysis of the cumulative impact map was conducted to assess the robustness of results and identify hot and cold spots of cumulative impacts. This dataset provides: 1) cumulative impact maps for the DFO Maritimes Region at 1 km2 resolution: a total cumulative impact map (i.e. including all 45 human activities), as well as cumulative impact maps for each of the five sectors, 2) a layer that identifies which grid cells are considered hot and cold spots of cumulative human impacts, and 3) the habitat layers included in the CIM.For further information concerning specifics of the maps and methods see Murphy et al. (2024) or contact the data provider. References:Halpern, B.S., Walbridge, S., Selkoe, K.A., Kappel, C.V., Micheli, F., D'Agrosa, C., Bruno, J.F., Casey, K.S., Ebert, C., Fox, H.E., Fujita, R., Heinemann, D., Lenihan, H.S., Madin, E.M.P., Perry, M.T., Selig, E.R., Spalding, M., Steneck, R., and Watson, R. 2008. A Global Map of Human Impact on Marine Ecosystems. Science. 319(5865): 948-952. doi:10.1126/science.1149345.Murray, C.C., Kelly, N.E., Nelson, J.C., Murphy, G.E.P., and Agbayani, S. 2022. Cumulative impact mapping and vulnerability of Canadian marine ecosystems to anthropogenic activities and stressors. DFO Can. Sci. Advis. Sec. Res. Doc. 2022/XXX. vi. + 52 p.Murphy, G.E.P., Stock, A., and Kelly, N.E. 2024 (in press). From land to deep sea: A continuum of cumulative human impacts on marine habitats in Atlantic Canada. Ecosphere.Cite this data as: Murphy, Grace; Kelly, Noreen (2023) Cumulative human impact maps for the Bay of Fundy and Scotian Shelf. Published September 2023. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/37b59b8b-1c1c-4869-802f-c09571cc984b

The Global Environmental eMuLator (GEML) is a component of the experimental Global Deterministic Prediction System (GDPS) and is an artificial intelligence (AI)-based weather emulator trained on past atmospheric states. More specifically, this GEML model is based on data compatible with the ¼°, 13-level version of the GraphCast model (Lam et al. 2023) from DeepMind. It was trained and refined by ECCC, using ECMWF's ERA5 data (1979-2016) and operational analyses (2016-2021). The weights have been recalculated and are also available to the public. Forecasts are carried out twice daily, each with a 10-day lead time. It generates the reference large-scale temperature and horizontal wind fields, toward which GDPS's GEM forecasts are spectrally nudged. The geographical coverage is global with a horizontal resolution of 28 km. Data is available on 13 pressure levels, and employs a uniform latitude-longitude grid with 0.25-degree grid resolution. Six atmospheric variables defined on the 13 pressure levels, along with 4 surface variables are available every 6 hours.

Average of the hourly Global Horizontal Irradiance (GHI) over 17 years (1998-2014). Data extracted from the National Solar Radiation Database (NSRDB) developed using the Physical Solar Model (PSM) by National Renewable Energy Laboratory ("NREL"), Alliance for Sustainable Energy, LLC, U.S. Department of Energy ("DOE").The current version of the National Solar Radiation Database (NSRDB) (v2.0.1) was developed using the Physical Solar Model (PSM), and offers users the solar resource datasets from 1998 to 2014). The NSRDB comprises 30-minute solar and meteorological data for approximately 2 million 0.038-degree latitude by 0.038-degree longitude surface pixels (nominally 4 km2). The area covered is bordered by longitudes 25° W on the east and 175° W on the west, and by latitudes -20° S on the south and 60° N on the north. The solar radiation values represent the resource available to solar energy systems. The AVHRR Pathfinder Atmospheres-Extended (PATMOS-x) model uses half-hourly radiance images in visible and infrared channels from the GOES series of geostationary weather satellites, a climatological albedo database and mixing ratio, temperature and pressure profiles from Modern Era-Retrospective Analysis (MERRA) to generate cloud masking and cloud properties. Cloud properties generated using PATMOS-x are used in fast radiative transfer models along with aerosol optical depth (AOD) and precipitable water vapor (PWV) from ancillary sources to estimate Direct Normal Irradiance (DNI) and Global Horizontal Irradiance (GHI). A daily AOD is retrieved by combining information from the MODIS and MISR satellites and ground-based AERONET stations. Water vapor and other inputs are obtained from MERRA. For clear sky scenes the direct normal irradiance (DNI) and GHI are computed using the REST2 radiative transfer model. For cloud scenes identified by the cloud mask, Fast All-sky Radiation Model for Solar applications (FARMS) is used to compute the GHI. The DNI for cloud scenes is then computed using the DISC model. The data in this layer is an average of the hourly GHI over 17 years (1998-2014). NOTE: The Geographical Information System (GIS) data and maps for solar resources for Global Horizontal Irradiance (GHI) and Direct Normal Irradiance (DNI) were developed by the U.S. National Renewable Energy Laboratory (NREL) and provided for Canada as an estimate. At present, neither the NREL data, nor the Physical Solar Model (PSM) on which the NREL data is based, have been either assessed or validated for the particular Canadian weather applications. A Canadian GHI map developed by the department of Natural Resources Canada (NRCan) is based on the State University of New York (SUNY) model and has been assessed and validated for the particular Canadian weather applications. The Canadian GHI map is available at http://atlas.gc.ca/cerp-rpep/en/.

The National Interest Land Mass (NILM) comprises a set of lands (mainly-NCC owned) considered essential to the functioning and experience of Canada's Capital. The NILM is the dominant tool guiding federal land management and ownership in support of Capital functions. The NILM was approved by Treasury Board in 1998 and the first update was approved in 2001. The 2020 NILM Update is the second update.

Modeled data showing the likely distribution of steller sealions. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

California and Steller sealion haulout sites. Coastal Resource Information Management System (CRIMS) is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

High-Resolution Digital Elevation Model (HRDEM) generated from LiDAR. This data collection includes a Digital Terrain Model (DTM) and a Digital Surface Model (DSM). The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013). Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The data in this collection have been reprojected from the source reference system to the Canada Atlas Lambert projection (EPSG:3979). **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

The Department of Homeland Security (MSI) supports the development of flood risk knowledge. Flood markers make it possible to illustrate the water level reached during a very major flood and thus to raise public awareness of the risks associated with it while maintaining this awareness of risk in the collective memory. __What is a flood marker? __A flood marker is a physical mark (15 cm in diameter for the standard) testifying to the maximum level reached by a watercourse during a very significant flood on a given date. The flood marker is usually located at a permanent location and is easily visible to everyone, for example on the wall of a building or on a dedicated pole.__Point data set “Flood markers” __ The “Flood reference” data set contains, for each marker, the location, the date of the reference flood and the maximum water level reached. The list of all attributes is provided in the dataset description sheet (Additional Information section).Despite the quality of the work carried out, the Ministry of Homeland Security cannot guarantee the absence of errors in the data.__Related datasets__ The “Flood Water Levels” dataset produced by the Ministry of Homeland Security also contains maximum water levels reached during a flood. The link to this dataset is provided in the _Documentation_ section.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**