This dataset is a combination of landscape unit, biogeoclimatic zone/subzone/variants and Cariboo Chilcotin Land Use Plan (CCLUP) leading group type (PineGroup or FirGroup) used to roll up seral stage assessments in the Cariboo Natural Resource Region. Refer to the **Cariboo Regional Biodiversity Conservation Strategy Update Note #2: Amalgamation of Small NDT-BEC Units in Relation to Assessment of Seral Objectives and Old Growth Management Area Planning** and **Cariboo Regional Biodiversity Conservation Strategy Update Note #3: Definition of the Fir Group and Pine Group for Purposes of Seral Stage Assessments within NDT 4 of the Cariboo-Chilcotin** (see below under "Related Links") for more information on how seral stage assessment amalgamation units are derived.

Seral stage assessment for the Cariboo Region to support the [Cariboo Chilcotin Land Use Plan (CCLUP)](https://www2.gov.bc.ca/gov/content/industry/crown-land-water/land-use-planning/regions/cariboo/cariboochilcotin-rlup). This assessment is based on [Vegetated Resource Information (VRI)](https://catalogue.data.gov.bc.ca/dataset/6ba30649-14cd-44ad-a11f-794feed39f40) data, and uses the CCLUP [Productive Forest Land Base](https://catalogue.data.gov.bc.ca/dataset/0cfa7f53-272d-47d4-83df-95b4edd75460) as the assessment landbase. Last updated 2026-02-06, based on 2024 VRI (Vegetation Resource Inventory) data. PDF reports for this and previous seral stage assessments are available for download under "Data and Resources" on the right side of this page. Previous seral stage assessment datasets are currently available via FTP download here: [ftp://ftp.geobc.gov.bc.ca/publish/Regional/WilliamsLake/forest/seral/](ftp://ftp.geobc.gov.bc.ca/publish/Regional/WilliamsLake/forest/seral/).

CanVec contains more than 60 topographic features classes organized into 8 themes: Transport Features, Administrative Features, Hydro Features, Land Features, Manmade Features, Elevation Features, Resource Management Features and Toponymic Features.This multiscale product originates from the best available geospatial data sources covering Canadian territory. It offers quality topographic information in vector format complying with international geomatics standards.CanVec can be used in Web Map Services (WMS) and geographic information systems (GIS) applications and used to produce thematic maps. Because of its many attributes, CanVec allows for extensive spatial analysis.Related Products (Open Maps Links):**[Constructions and Land Use in Canada - CanVec Series - Manmade Features](https://open.canada.ca/data/en/dataset/fd4369a4-21fe-4070-914a-067474da0fd6)****[Lakes, Rivers and Glaciers in Canada - CanVec Series - Hydrographic Features](https://open.canada.ca/data/en/dataset/9d96e8c9-22fe-4ad2-b5e8-94a6991b744b)****[Administrative Boundaries in Canada - CanVec Series - Administrative Features](https://open.canada.ca/data/en/dataset/306e5004-534b-4110-9feb-58e3a5c3fd97)****[Mines, Energy and Communication Networks in Canada - CanVec Series - Resources Management Features](https://open.canada.ca/data/en/dataset/92dbea79-f644-4a62-b25e-8eb993ca0264)****[Wooded Areas, Saturated Soils and Landscape in Canada - CanVec Series - Land Features](https://open.canada.ca/data/en/dataset/80aa8ec6-4947-48de-bc9c-7d09d48b4cad)****[Transport Networks in Canada - CanVec Series - Transport Features](https://open.canada.ca/data/en/dataset/2dac78ba-8543-48a6-8f07-faeef56f9895)****[Elevation in Canada - CanVec Series - Elevation Features](https://open.canada.ca/data/en/dataset/64aad38d-f692-4ab6-bf2c-f938586c1249)****[Map Labels - CanVec Series - Toponymic Features](https://open.canada.ca/data/en/dataset/b3fdcd34-4533-415f-8f83-68f17f9d5d68)**

This geospatial data depicts the Draft Offshore Wind Licencing Areas (Draft Areas) recommended by the Committee for the Regional Assessment of Offshore Wind Development in Newfoundland and Labrador (Committee).*Based on work completed to date, the Committee has found the Draft Areas are where offshore wind development would have the least impact within the Regional Assessment Focus Area. Identifying Areas:Section 6 of the Draft Regional Assessment Report (see Data Resources below) includes details on how the Draft Areas were identified. They are the result of the constraints analysis summarized below, with very little modification to area boundaries. The Committee successively removed areas from the Regional Assessment Focus Area (published on Open Government by the Impact Assessment Agency on December 1, 2023). Constraints analysis steps included: • Step 1: Creating Coastal Buffers.• Step 2: Removing Marine Critical Habitat.• Step 3: Removing Marine Protected Areas. • Step 4: Removing Marine Traffic Routes.• Step 5: Removing Areas with High Vessel Traffic.• Step 6: Removing the South Coast Fjords NMCA Study Area.• Step 7: Removing Areas around National Parks & World Heritage Sites.• Step 8: Removing High Density Fishing Areas.• Step 9: Removing Community-based Coastal Resources.An Iterative Process:Identifying offshore wind licencing areas is an iterative process. On March 22, 2024, the Committee submitted its Interim Report to Ministers. This report included a preliminary map of recommended areas for offshore wind development licencing. The preliminary areas were updated based on engagement outcomes, additional data and analysis submitted to the Committee by Regional Assessment participants, and additional research and analysis completed by the Committee between March and October 2024. On October 1, 2024, the Committee’s Draft Report, including updated offshore wind areas, was published for a public comment period. The Draft Areas supersede the Preliminary Offshore Wind Licencing Areas. The Draft Areas are also subject to change. The Committee will submit its Final Report and Initial Offshore Wind Licencing Areas for Consideration to Ministers on or before January 23, 2025. The Committee recommends that regulators consider the forthcoming Initial Offshore Wind Energy Licencing Areas, and the Committee’s report to Ministers, to help inform offshore wind development licencing areas in the region.Latest Update:The Committee’s Final Report and final version of Initial Offshore Wind Energy Licencing Areas for Consideration were submitted to Ministers on January 23, 2025. This completes the Committee’s mandate. Ministers may also choose to make the final versions of these areas available following the Regional Assessment. However, no changes have been made to the geospatial data representing the Draft Areas (published here).Please note the Committee updated the term “Initial Offshore Wind Energy Licencing Areas for Consideration” in the final iteration of their work to better communicate the areas it identified are not licencing areas but are a starting point to help inform the selection of licencing areas. Previous iterations of these areas were called Preliminary Offshore Wind Licencing Areas and Draft Offshore Wind Licencing Areas.*Regional Assessment Background: The federal Ministers of Environment and of Natural Resources, and the provincial Ministers of Industry, Energy and Technology, of Environment and Climate Change, and of Intergovernmental Affairs (Ministers) are signatory to the Regional Assessment Agreement. The goal of the Regional Assessment is to provide information to federal and provincial governments to help them plan for offshore wind development in Newfoundland and Labrador, and complete impact assessments of offshore wind projects. Federal and provincial Ministers appointed an independent committee, comprising five members of diverse backgrounds and expertise to conduct the assessment.

Leaf area index (LAI) quantifies the density of vegetation irrespective of land cover. LAI quantifies the total foliage surface area per groud surface area. LAI has been identified by the Global Climate Observing System as an essential climate variable required for ecosystem,weather and climate modelling and monitoring. This product consists of time series of LAI observed between 2016 and 2025 over reclamation sites in Alberta, Canada May and October. The temporal frequency depends on cloud cover.

The toponymic features of the CanVec series include proper nouns designating places and representations of the territory. This data come from provincial, territorial and Canadian toponymic databases. They are used in the CanVec Series for cartographic reference purposes and vary according to the scale of display. The toponymic features of the CanVec series can differ from the Canada's official geographical names.The CanVec multiscale series is available as prepackaged downloadable files and by user-defined extent via a Geospatial data extraction tool. Related Products (Open Maps Links):[Topographic Data of Canada - CanVec Series](https://open.canada.ca/data/en/dataset/8ba2aa2a-7bb9-4448-b4d7-f164409fe056)Users can obtain information about Canada's official toponyms at: **[Geographical names in Canada](https://www.nrcan.gc.ca/maps-tools-publications/maps/geographical-names-canada/10786)**

The administrative features of the CanVec series include geopolitical regions (international, territorial and provincial) and populated place names.A wide selection of attributes describe the data.The CanVec multiscale series is available as prepackaged downloadable files and by user-defined extent via a Geospatial data extraction tool.Related Products (Open Maps Links):[Topographic Data of Canada - CanVec Series](https://open.canada.ca/data/en/dataset/8ba2aa2a-7bb9-4448-b4d7-f164409fe056)

The elevation features of the CanVec series include the elevation contours and elevation points. These entities are used to describe the relief of the Canadian Landmass.The CanVec multiscale series is available as prepackaged downloadable files and by user-defined extent via a Geospatial data extraction tool.Related Products (Open Maps Links):[Topographic Data of Canada - CanVec Series](https://open.canada.ca/data/en/dataset/8ba2aa2a-7bb9-4448-b4d7-f164409fe056)

The land features of the CanVec series contains landscape features of Canada such as islands, shoreline delineation, wooded areas, saturated soil features, landform features (esker, sand, etc.).The CanVec multiscale series is available as prepackaged downloadable files and by user-defined extent via a Geospatial data extraction tool.Related Products (Open Maps Links):[Topographic Data of Canada - CanVec Series](https://open.canada.ca/data/en/dataset/8ba2aa2a-7bb9-4448-b4d7-f164409fe056)

This data shows the spatial extent of surface disturbance mapping projects completed by GIS contractors on behalf of Environment Yukon. Within these polygons, features were digitized using high resolution satellite imagery and orthophotos; outside these polygons, disturbance mapping is either incomplete or non-existent.Distributed from [GeoYukon](https://yukon.ca/en/statistics-and-data/mapping/explore-map-data-using-geoyukon) by the [Government of Yukon](https://yukon.ca/) . Discover more digital map data and interactive maps from Yukon's digital [map](https://yukon.ca/en/maps) data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)