Notice - Replacement of the English and French Web services (WMS and ESRI REST) with a bilingual one.The NRN product is distributed in the form of thirteen provincial or territorial datasets and consists of two linear entities (Road Segment and Ferry Connection Segment) and three punctual entities (Junction, Blocked Passage, Toll Point) with which is associated a series of descriptive attributes such as, among others: First House Number, Last House Number, Street Name Body, Place Name, Functional Road Class, Pavement Status, Number Of Lanes, Structure Type, Route Number, Route Name, Exit Number. The development of the NRN was realized by means of individual meetings and national workshops with interested data providers from the federal, provincial, territorial and municipal governments. In 2005, the NRN edition 2.0 was alternately adopted by members from the Inter-Agency Committee on Geomatics (IACG) and the Canadian Council on Geomatics (CCOG). The NRN content largely conforms to the ISO 14825 from ISO/TC 204.

DEPRECATED: During a declared emergency event, this dataset will include the communities affected by Evacuation Order Orders and Alerts, which represents the populated communities and First Nations in the province, and their current evacuation status.

**NOTE** This layer is being replaced with the new authoritative source for PSP location: [Growth and Yield Plots - Active Status](https://catalogue.data.gov.bc.ca/dataset/5da8d02e-cdd8-40f8-b77e-d359f0e67dcd) Growth and Yield dataset is a provincial data set that comprised of Permanent Sample Plots (PSP). The Ministries and resource developers will want the active sample locations to determine where there are recognized feature conflicts with any resource development

Data from the analysis of sea surface temperature, sea surface salinity, bottom temperature, and bottom salinity, over the Gulf of Maine and Scotian Shelf, for 23 CMIP6 models. The analysis includes an evaluation of CMIP6 model performance for the CMIP6 historical (1950-2014) experiment. Future projections are summarized for CMIP6 scenarios SSP245 and SSP370 with the calculation of relative annual and seasonal changes between the historical period (1950-2014) and three future periods (2030-2039, 2040-2049, 2030-2049).Wang, Z., DeTracey, B., Maniar, A., Greenan, B., Gilbert, D. and Brickman, D., Future hydrographic state of the Scotian Shelf and Gulf of Maine from 23 CMIP6 models. Can. Tech. Rep. Hydrogr. Ocean. Sci. XXX: vii + XXXp.Cite this data as: Wang, Z., DeTracey, B., Maniar, A., Greenan, B., Gilbert, D. and Brickman, D. Future hydrographic state of the Scotian Shelf and Gulf of Maine from 23 CMIP6 Models. Published July 2022. Ocean Ecosystem Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/6247bb5a-14b3-461d-9ed3-b42553107bbc

This dataset contains points showing the locations of the Manitoba Infrastructure's (MI) approved, new, and continuing capital projects for the year 2021/2022. Examples of MI's capital projects are asphalt surface treatment, grading, bituminous rehabilitation, concrete reconstruction, culvert jacking, intersection improvement, structures improvement, traffic signal improvements, and traffic safety improvements.This dataset contains points showing the locations of the capital projects such as asphalt surface treatment, grading, bituminous rehabilitation, concrete reconstruction, culvert jacking, intersection improvement, structures improvement, traffic signal improvements, and traffic safety improvements. This dataset was created by digitizing high-resolution imagery of Manitoba road network, bridge sites, and culvert locations. The details of the capital projects are available as attributes of the dataset. Fields included ( Alias (Field Name): Field description.) ObjectID (OBJECTID): Sequential unique whole numbers that are automatically generated Project # (Project__):  A unique ID assigned to a project by MI Capital Project Team. Hwy (Hwy): The highway number where the project is located.  Location Description (Location_Description): A detailed description of the project location. Project Distance in km (km): The physical length of the project Project Type (Project_Type): A particular category assigned to the project based on the nature of work. Total Project Status (Total_Project_Status): Current total status of the project (e.g. new, continue, etc.) Construction Project Status (Construction_Project_Status): Current phase of project (e.g. construction phase, engineering design phase, etc.) Anticipated Construction Start Date (Anticipated_Construction_Start_): The expected construction start date for the project. Anticipated Construction Complete Date (Anticipated_Construction_Comple): The expected construction completion date for the project. Municipality Name (MUNI_NAME): The name of the municipality where the project is located. Department Program (Department_Program): The name of the MI department responsible for the project. This dataset is used in Manitoba Infrastructure Projects an interactive map that shows Manitoba infrastructure's new, approved, and continuing capital project locations.

This layer is the authoritative source for locating Active Status Growth and Yield plots also known as Permanent Sample Plots (PSPs). These plots are protected and require an additional minimum windfirm buffer of 50m radius in the interior and 100m radius on the coast. These are generally 16m radius fixed area. Therefore, protected areas need to be a minimum of 66m radius around the plot centre in the interior and 116m radius on the coast. Best practices are to locate the plot centre on the ground. Coordinate accuracy varies. Please contact Anya Reid (Anya.Reid@gov.bc.ca) with questions or updated coordinates for plots. NOTE: Accuracy of the coordinates are variable. Coordinates for plots with a more recent (since 2000) last measurement are generally quite accurate (3m). However, plots measured in the 1990's have a wide range of coordinate accuracy. In all cases, it is necessary to ground truth plot location before block layout. In this spatial layer, low accuracy coordinates are buffered 300m to ensure they do not get missed from development planning. This layer replaces the [Growth and Yield Samples – Active Status](https://catalogue.data.gov.bc.ca/dataset/0ca49478-5d0f-44e8-b6af-3fd6e387803c) layer with more accurate and current information from the Inventory Sample Management Consolidation (ISMC) database.

A Conservation Unit (CU) is a group of wild Pacific salmon sufficiently isolated from other groups that, if extirpated, is very unlikely to recolonize naturally within an acceptable timeframe, such as a human lifetime or a specified number of salmon generations.Holtby and Ciruna (2007) provided a framework for aggregating the five species of salmon (genus Oncorhynchus) found on Canada’s Pacific coast into species-specific CUs based on three primary characteristics: ecotypology, life history and genetics. The first stage in the description of the Conservation Units is based solely on ecology. The ecotypologies used in this framework include a combined characterization of both freshwater and near-shore marine environments, and is termed “joint adaptive zone”. The second stage of the description involves the use of life history, molecular genetics, and further ecological characterizations to group and partition the first stage units into the final Conservation Units. The result is CUs that are described through the joint application of all three axes. It is important to note that CUs are distinct from other aggregates of Pacific salmon, such as designatable units (DUs) under the Species at Risk Act or management units (MUs).CU Counting Sites:Salmon spawner enumeration data in the Pacific Region is stored and managed in the New Salmon Escapement Database (NuSEDS). The term “escapement” is used to refer to the group of mature salmon that have ‘escaped’ from various sources of exploitation, and returned to freshwater to spawn and reproduce. This data is assigned to a “Counting Site”, which may be a complete watercourse with a marine terminus, a tributary to a larger watercourse, or a defined reach within a watercourse that may or may not encompass the entire population but represents an index of the abundance of that population. CU Status:CUs form the basic unit for assessment under Canada’s Policy for the Conservation of Wild Salmon Policy (WSP) (DFO 2005). The biological status of a CU is evaluated using a number of metrics (Holt et al. 2009; Holt 2009), which indicate a WSP status zone: Red (poor status), Amber (marginal status), or Green (healthy status). A final step then incorporates all metric and status-related information into a final integrated status for each CU, along with expert commentary to support the final status determination (e.g., DFO 2012; DFO 2016). This information is used as inputs to fisheries management processes to help prioritize assessment activities and management actions.Note: CU boundaries were reviewed in 2020-2021 and have been updated from the BC Freshwater Atlas 1:50,000 scale to the BC Freshwater Atlas 1:20,000 scale. The CU boundaries were last updated in March 2023. Please be aware that CUs may be reviewed and are subject to change without notice. Please refer to Conservation Unit Review Requests-Form and Summary for a list of CU review requests that are ongoing or have been finalized.

A Conservation Unit (CU) is a group of wild Pacific salmon sufficiently isolated from other groups that, if extirpated, is very unlikely to recolonize naturally within an acceptable timeframe, such as a human lifetime or a specified number of salmon generations.Holtby and Ciruna (2007) provided a framework for aggregating the five species of salmon (genus Oncorhynchus) found on Canada’s Pacific coast into species-specific CUs based on three primary characteristics: ecotypology, life history and genetics. The first stage in the description of the Conservation Units is based solely on ecology. The ecotypologies used in this framework include a combined characterization of both freshwater and near-shore marine environments, and is termed “joint adaptive zone”. The second stage of the description involves the use of life history, molecular genetics, and further ecological characterizations to group and partition the first stage units into the final Conservation Units. The result is CUs that are described through the joint application of all three axes. It is important to note that CUs are distinct from other aggregates of Pacific salmon, such as designatable units (DUs) under the Species at Risk Act or management units (MUs).CU Counting Sites:Salmon spawner enumeration data in the Pacific Region is stored and managed in the New Salmon Escapement Database (NuSEDS). The term “escapement” is used to refer to the group of mature salmon that have ‘escaped’ from various sources of exploitation, and returned to freshwater to spawn and reproduce. This data is assigned to a “Counting Site”, which may be a complete watercourse with a marine terminus, a tributary to a larger watercourse, or a defined reach within a watercourse that may or may not encompass the entire population but represents an index of the abundance of that population. CU Status:CUs form the basic unit for assessment under Canada’s Policy for the Conservation of Wild Salmon Policy (WSP) (DFO 2005). The biological status of a CU is evaluated using a number of metrics (Holt et al. 2009; Holt 2009), which indicate a WSP status zone: Red (poor status), Amber (marginal status), or Green (healthy status). A final step then incorporates all metric and status-related information into a final integrated status for each CU, along with expert commentary to support the final status determination (e.g., DFO 2012; DFO 2016). This information is used as inputs to fisheries management processes to help prioritize assessment activities and management actions.Note: CU boundaries were reviewed in 2020-2021 and have been updated from the BC Freshwater Atlas 1:50,000 scale to the BC Freshwater Atlas 1:20,000 scale. The CU boundaries were last updated in March 2023. Please be aware that CUs may be reviewed and are subject to change without notice.Please refer to Conservation Unit Review Requests-Form and Summary for a list of CU review requests that are ongoing or have been finalized.

Planting activities reported on openings into RESULTS. More than one planting activitiy may occur within an opening. Planting activiites may also overlap. Planting attribute reporting is mandatory requirement while planting maps are optional. Planting reports includes species and seedlot information. This is a part of Silviculture and Land Status dataset, which includes tracking achievement of silviculture obligations on Crown land

A Conservation Unit (CU) is a group of wild Pacific salmon sufficiently isolated from other groups that, if extirpated, is very unlikely to recolonize naturally within an acceptable timeframe, such as a human lifetime or a specified number of salmon generations.Holtby and Ciruna (2007) provided a framework for aggregating the five species of salmon (genus Oncorhynchus) found on Canada’s Pacific coast into species-specific CUs based on three primary characteristics: ecotypology, life history and genetics. The first stage in the description of the Conservation Units is based solely on ecology. The ecotypologies used in this framework include a combined characterization of both freshwater and near-shore marine environments, and is termed “joint adaptive zone”. The second stage of the description involves the use of life history, molecular genetics, and further ecological characterizations to group and partition the first stage units into the final Conservation Units. The result is CUs that are described through the joint application of all three axes. It is important to note that CUs are distinct from other aggregates of Pacific salmon, such as designatable units (DUs) under the Species at Risk Act or management units (MUs).CU Counting Sites:Salmon spawner enumeration data in the Pacific Region is stored and managed in the New Salmon Escapement Database (NuSEDS). The term “escapement” is used to refer to the group of mature salmon that have ‘escaped’ from various sources of exploitation, and returned to freshwater to spawn and reproduce. This data is assigned to a “Counting Site”, which may be a complete watercourse with a marine terminus, a tributary to a larger watercourse, or a defined reach within a watercourse that may or may not encompass the entire population but represents an index of the abundance of that population. CU Status:CUs form the basic unit for assessment under Canada’s Policy for the Conservation of Wild Salmon Policy (WSP) (DFO 2005). The biological status of a CU is evaluated using a number of metrics (Holt et al. 2009; Holt 2009), which indicate a WSP status zone: Red (poor status), Amber (marginal status), or Green (healthy status). A final step then incorporates all metric and status-related information into a final integrated status for each CU, along with expert commentary to support the final status determination (e.g., DFO 2012; DFO 2016). This information is used as inputs to fisheries management processes to help prioritize assessment activities and management actions.Note: CU boundaries were reviewed in 2020-2021 and have been updated from the BC Freshwater Atlas 1:50,000 scale to the BC Freshwater Atlas 1:20,000 scale. The CU boundaries were last updated in March 2023. Please be aware that CUs may be reviewed and are subject to change without notice. Please refer to Conservation Unit Review Requests-Form and Summary for a list of CU review requests that are ongoing or have been finalized.