Home /Search
Search datasets
We have found 268 datasets for the keyword " -logging". You can continue exploring the search results in the list below.
Datasets: 106,031
Contributors: 42
Results
268 Datasets, Page 1 of 27
Fibre Recovery Zones
The Fibre Recovery Zones (FRZ) define areas where increased waste rates may apply to avoidable waste left on a cutting authority as detailed in the Provincial Logging Residue and Waste Measurement Procedure Manual. The boundaries have been approved by the Director of the Forest Tenures Branch, Ministry of Forests, Lands, Natural Resource Operations and Rural Development. Current extent of the data is for the Coast Fibre Recovery Zones only.
Provincially Significant Peatlands
Provincially significant peatlands are a type of protected area designated under The Peatlands Stewardship Act and The Provincially Significant Peatlands Regulation.Provincially significant peatlands are a type of protected area designation under The Peatlands Stewardship Act and The Provincially Significant Regulation. Peatlands designated as provincially significant are legally protected from resource development activities, including peat harvesting, mining, hydro-electric development, logging, and agricultural activities. See The Peatlands Stewardship Act for additional details https://www.gov.mb.ca/nrnd/forest/land-management/peatlands/index.html.
Maps forecasting the availability of logging residues in Canada
This publication contains vector data (shapefile) of the post-harvest forest residues in Canada for the bioenergy/bioproducts sector in oven-dry tonnes per year (ODT/yr) over the next 20 years. The maps were produced using different remote sensing products. We used forest attribute data at 250 m MODIS for the years 2001 and 2011 (Beaudoin et al. 2014 and 2018) combined with forest cover changes for the years 1985 to 2015 contained in the CanLaD dataset at 30 m Landsat(Guindon et al. 2017 and 2018). Results of available biomass (in the form of harvest residues) were reported at the 10 km x 10 km scale, while the map of mature forests in Canada was prepared at the forest management unit (FMU) level. Briefly, our methodology consisted of three steps: 1- create a map of mature forests for the year 2011, based on 2001-2010 average cut volumes within FMUs; 2- develop an annual cut rate from the area harvested within FMUs from 1985 to 2015 and; 3- define the amount of biomass in the form of forest residues available for the bioenergy sector. The biomass of branches and leaves of forest attribute data was used as a proxy to define the biomass of forest residues available. Nationally, the average biomass of forest residues available after harvest is 26 ± 16 ODT/ha, while the total annual availability for all managed forests in Canada was 21 million ODT/yr. A scientific article gives additional details on the methodology: Barrette J, Paré D, Manka F, Guindon L, Bernier P, Titus B. 2018. Forecasting the spatial distribution of logging residues across the Canadian managed forest. Can. J. For. Res. 48: http://www.nrcresearchpress.com/doi/10.1139/cjfr-2018-0080 Reference for this dataset: Barrette J, Paré D, Manka F, Guindon L, Bernier P, Titus B. 2018. Maps forecasting the availability of logging residues in Canada. Natural Resources Canada, Canadian Forest Service, Laurentian Forestry Centre, Quebec, Canada. https://doi.org/10.23687/5072c495-240c-42a3-ad55-c942ab37c32a
Population size and variation of 2016 forest sector-based communities, 2001 to 2016
This product provides population counts for 2001 and 2016 for 105 census subdivisions (CSDs) for which the forest sector is a major source of employment income—defined by Natural Resources Canada as 20% or more of total CSD income excluding government transfers. These files were produced by Statistics Canada, Environment, Energy and Transportation Statistics Division, 2018, special tabulation from the 2001 and 2016 Census of Population; Natural Resources Canada, Canadian Forest Services, Economic Analysis Division; Canada’s National Forest Inventory (NFI), 2016, Grouped kNN Map layers, http://tree.pfc.forestry.ca (accessed April 7, 2017). Data from the 2016 Census of Population were used to identify the 105 census subdivisions. Note that changes occur to the number and the boundaries of CSDs between censuses. Adjustments were made to CSD boundaries to account for changes.Some data were suppressed for data quality reasons or to meet the confidentiality requirements of the Statistics Act. Income data were available for 3,675 of 5,162 CSDs. This analysis may therefore underreport the total number of communities for which the forest sector is a major economic driver. Note that a decline in the percentage of forest sector income may be due to a decrease in forest sector income or an increase in income from other sources. The reference period for income data in the Census of Population is the calendar year prior to the census.The forest sector includes North American Industry Classification codes 113 – forestry and logging, 1153 – support activities for forestry and logging, 321 – wood product manufacturing and 322 – paper product manufacturing.
Maps of biogeochemistry and soil properties for use as indicators of site sensitivity to logging residue harvesting
This publication contains thirteen (13) maps of different biogeochemical and soil properties of forest ecosystems of Canada’s managed forest. A scientific article gives additional details on the methodology: Paré, D., Manka, F., Barrette, J., Augustin, F., Beguin, J. 2021. Indicators of site sensitivity to the removal of forest harvest residues at the sub-continental scale: mapping, comparisons, and challenges. Ecol. Indicators. https://dx.doi.org/10.1016/j.ecolind.2021.107516
Map of the merchantable volume of the “mature forest” in Canada
This publication contains a raster maps at 250 m resolution of the merchantable volume (m3/ha) of the mature Canadian forest available for harvesting in the next 20 years (2011 to 2031). The maps were produced from remote sensing products at a spatial resolution of 250 m on the MODIS pixel grid and 30 m on the Landsat pixel grid. More specifically, we used forest attribute data at the 250 m pixel for the years 2001 and 2011 (Beaudoin et al 2014 and 2018) combined with forest cover changes for the years 1985 to 2015 at 30 m (Guindon et al. 2017 and 2018). The map of mature forests in Canada was prepared at the forest management unit (FMU) level and therefore exclude private lands. To be considered mature (i.e. available for cutting in the next 20 years), the forest pixels of Beaudoin et al. (2018) was to have a merchantable volume per ha equal to or greater than 80% of the average merchantable volume of the pixels that were harvested between 2001 and 2011 per forest management unit. A scientific article gives additional details on the methodology: Barrette J, Paré D, Manka F, Guindon L, Bernier P, Titus B. 2018. Forecasting the spatial distribution of logging residues in Canada’s managed forests. Can. J. For. Res. 48: http://www.nrcresearchpress.com/doi/10.1139/cjfr-2018-0080Reference for this dataset: Barrette J, Paré D, Manka F, Guindon L, Bernier P, Titus B. 2018. Forecasting the spatial distribution of logging residues in Canada’s managed forests. Natural Resources Canada, Canadian Forest Service, Laurentian Forestry Centre, Quebec, Canada. https://doi.org/10.23687/dd94871a-9a20-47f5-825b-768518140f35
Road construction
List of complete or partial obstructions to a public road with geolocation and time period of the same.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
Record - S1A-EW-GRDM-1SDH-20240226T191651-20240226T191725-052734-06617D-EFD7-Sentinel-1
The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**
Record - S1A-EW-GRDM-1SDH-20240331T162411-20240331T162515-053228-067359-BBF0-Sentinel-1
The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**
Record - S1A-EW-GRDM-1SDH-20240802T123356-20240802T123501-055034-06B475-2DAC-Sentinel-1
The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback