Home /Search
Search datasets
We have found 17 datasets for the keyword " 11c". You can continue exploring the search results in the list below.
Datasets: 103,401
Contributors: 42
Results
17 Datasets, Page 1 of 2
Difference in fire season length - Medium-term (2041-2070) under RCP 8.5 compared to reference period
Fire weather refers to weather conditions that are conducive to fire. These conditions determine the fire season, which is the period(s) of the year during which fires are likely to start, spread and do sufficient damage to warrant organized fire suppression.The length of fire season is the difference between the start- and end-of-fire-season dates. These are defined by the Canadian Forest Fire Weather Index (FWI; http://cwfis.cfs.nrcan.gc.ca/) start-up and end dates. Start-up occurs when the station has been snow-free for 3 consecutive days, with noon temperatures of at least 12°C. For stations that do not report significant snow cover during the winter (i.e., less than 10 cm or snow-free for 75% of the days in January and February), start-up occurs when the mean daily temperature has been 6°C or higher for 3 consecutive days. The fire season ends with the onset of winter, generally following 7 consecutive days of snow cover. If there are no snow data, shutdown occurs following 7 consecutive days with noon temperatures lower than or equal to 5°C.Historical climate conditions were derived from the 1981–2010 Canadian Climate Normals. Future projections were computed using two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: difference in projected fire season length for the medium-term (2041-2070) under the RCP 8.5 (continued emissions increases) compared to reference period across Canada.
Difference in fire season length - Long-term (2071-2100) under RCP 8.5 compared to reference period
Fire weather refers to weather conditions that are conducive to fire. These conditions determine the fire season, which is the period(s) of the year during which fires are likely to start, spread and do sufficient damage to warrant organized fire suppression.The length of fire season is the difference between the start- and end-of-fire-season dates. These are defined by the Canadian Forest Fire Weather Index (FWI; http://cwfis.cfs.nrcan.gc.ca/) start-up and end dates. Start-up occurs when the station has been snow-free for 3 consecutive days, with noon temperatures of at least 12°C. For stations that do not report significant snow cover during the winter (i.e., less than 10 cm or snow-free for 75% of the days in January and February), start-up occurs when the mean daily temperature has been 6°C or higher for 3 consecutive days. The fire season ends with the onset of winter, generally following 7 consecutive days of snow cover. If there are no snow data, shutdown occurs following 7 consecutive days with noon temperatures lower than or equal to 5°C.Historical climate conditions were derived from the 1981–2010 Canadian Climate Normals. Future projections were computed using two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: difference in projected fire season length for the long-term (2071-2100) under the RCP 8.5 (continued emissions increases) compared to reference period across Canada.
Difference in fire season length - Long-term (2071-2100) under RCP 2.6 compared to reference period
Fire weather refers to weather conditions that are conducive to fire. These conditions determine the fire season, which is the period(s) of the year during which fires are likely to start, spread and do sufficient damage to warrant organized fire suppression.The length of fire season is the difference between the start- and end-of-fire-season dates. These are defined by the Canadian Forest Fire Weather Index (FWI; http://cwfis.cfs.nrcan.gc.ca/) start-up and end dates. Start-up occurs when the station has been snow-free for 3 consecutive days, with noon temperatures of at least 12°C. For stations that do not report significant snow cover during the winter (i.e., less than 10 cm or snow-free for 75% of the days in January and February), start-up occurs when the mean daily temperature has been 6°C or higher for 3 consecutive days. The fire season ends with the onset of winter, generally following 7 consecutive days of snow cover. If there are no snow data, shutdown occurs following 7 consecutive days with noon temperatures lower than or equal to 5°C.Historical climate conditions were derived from the 1981–2010 Canadian Climate Normals. Future projections were computed using two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: difference in projected fire season length for the long-term (2071-2100) under the RCP 2.6 (rapid emissions reductions) compared to reference period across Canada.
Cut Lines - 250k - Canvec
Land Features entities are: Island, Shoreline, Wooded Area, Saturated soil, Landform Feature (esker, sand\...), and Cut Line. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)
Marine Conservation Targets (MCT) - Camera surveys of the subtidal flora of Nova Scotia and Southwest New Brunswick 2022-2023
To assess the current distribution of kelp beds and other macroalgae in Nova Scotia and Southwest New Brunswick, subtidal drop camera surveys were performed from 2022-2023 at 140 sites. For each site, a GoPro HERO 10 camera was towed along a deep (7-12m) and shallow (3-5m) depth contour until 20 images were acquired per depth. Where possible, species were identified from photos, with particular care given to kelps (defined here as orders Laminariales and Tilopteridales) and fucoids (order Fucales). Crust-forming algae was not counted. Percent cover was calculated using a 10x10 point grid overlaid on each image and recording the dominant cover type at each point. The depth (in meters) of each photo after correcting for tide height ranged from ~0.5m to ~12m. Depths were corrected to chart datum (lowest astronomical tide) using tide predictions from the nearest tide station, taken from tides.gc.ca. Sampling was performed between July and October. Cite this data as: Krumhansl K, Brooks C, Lowen B, DiBacco C, (2025). Camera Surveys of the Subtidal Flora of Nova Scotia and Southwest New Brunswick 2022-2023. Version 1.7. Fisheries and Oceans Canada. Samplingevent dataset. https://ipt.iobis.org/obiscanada/resource?r=camera_surveys_of_the_subtidal_flora_of_nova_scotia_2022-2023&v=1.7For additional information please see:Krumhansl K.A., Brooks C.M., Lowen B., O’Brien J., Wong M., DiBacco C. Loss, resilience and recovery of kelp forests in a region of rapid ocean warming. Annals of Botany 2024 Mar 8; 133(1):73-92. Brooks C.M., Krumhansl K.A. 2023. First record of the Asian Antithamnion sparsum Tokida, 1932 (Ceramiales, Rhodophyta) in Nova Scotia, Canada. BioInvasions Records 12(3):745-725.
Maximum Temperature (°C)
Maximum Temperature represents the highest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.
NCC parking lots
Point representing each of the parking lots under the maintenance and management of the NCC.
Cut Lines - 50k - Canvec
Land Features entities are: Island, Shoreline, Wooded Area, Saturated soil, Landform Feature (esker, sand\...), and Cut Line. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)
Minimum Temperature (°C)
Minimum Temperature represents the lowest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.
Roads - 250k - Canvec
Transport Features is composed of, among others, the National Road Network (NRN) and the National Railway Network (NRWN). Transport Features entities are: Nautical Facility, Track Segment, Track Junction, Railway Station, Track Crossing, Track Marker Post, Track Structure, Rail Ferry, Road Segment, Road Ferry, Road Junction, Blocked Passage, Toll Point, Aerial Cableway, Footbridge, Trail, Navigational Aid, Marina, and Runway. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback