Notice: This layer is out of date and scheduled to be retired October 31, 2026.Yukon First Nations and Tetlit Gwich'in settlement lands including both rural blocks (R-block) and Fee Simple lands of the First Nations that have ratified their agreements. This data was built using the 1:1,000,000 Digital Chart of the World (DCW) as the base and the 1:30,000 signed Territorial Research Base Maps (TRBM) to define the boundaries.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps). Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca) 

LiDAR Derived Digital Elevation Models available at a 1m resolution in New Brunswick Stereographic Double Projection (NBSDP). LiDAR Derived Digital Elevation Models and Digital Surface Models available at 1m or 2m resolutions from NRCAN in Universal Transverse Mercator (UTM).

Soil Landscapes of Canada (SLC) derived from V3.1 and V2.2 – Cartographic 1M will provide a general overview of soil landscapes in Canada at a scale of 1: 1 Million.

This data report provides information on temperature and salinity in the Godbout region of the St. Lawrence Estuary. Sampling was carried out from 2019 to 2021 over an area of <5 km2. The databases provide information on temperature and salinity at an hourly rate for 2 years. The aim of this project is to analyze telemetry data from sea urchins (Strongylocentrotus droebachiensis), snow crabs (Chionoecetes opilio), rock crabs (Cancer irroratus), spider crabs (Hyas spp.) and whelks (Buccinum undatum). This report focuses on the presentation of benthic environmental data collected throughout the study with high spatial and temporal resolution. All reported variables were collected at the seafloor, as the aim of the project was to study the movement of epibenthic species. Temperature data were collected from three devices: telemetry receivers with integrated temperature sensors (InnovaseaTM), HoboTM and Star-OddiTM probes. Temperature data processing involved cleaning up extreme values (below 2°C and above 20°C) and homogenizing the data to fit the bathymetry matrix (1m x 1m cells) of the study site. Temperature data are provided in a NetCDF file with a matrix of the entire study site, where there is a stratum for each hour between August 2019 and October 2021 and in each file, a temperature value for each pixel of the raster. Salinity data were collected from Star-OddiTM probes only. Salinity values were averaged hourly for the entire study area. Salinity data is provided as a CSV file with one salinity value per hour for the entire study area.

This feature delineates forest and vegetation stands in the Yukon at a scale of 1:5,000. It is an operational level forest inventory (as opposed to a management level). This inventory has been completed in various stages, between 2013 and 2014, and delineation via softcopy from stereo images acquired in the years 2007 and 2012. The aerial images used for the Haines Junction region (Champagne and Aishihik Traditional Territory) had a ground sample distance (GSD) of 40 cm and were collected in both color and infrared. The aerial imagery in the southcentral Yukon were 1:40,000 black and white hard copy images, scanned at 60 microns or approximately 1m GSD.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This feature delineates forest and vegetation stands in the Yukon at a scale of 1:5,000. It is an operational level forest inventory (as opposed to a management level). This inventory has been completed in various stages, between 2013 and 2014, and delineation via softcopy from stereo images acquired in the years 2007 and 2012. The aerial images used for the Haines Junction region (Champagne and Aishihik Traditional Territory) had a ground sample distance (GSD) of 40 cm and were collected in both color and infrared. The aerial imagery in the southcentral Yukon were 1:40,000 black and white hard copy images, scanned at 60 microns or approximately 1m GSD.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This feature delineates forest and vegetation stands in the Yukon at a scale of 1:5,000. It is an operational level forest inventory (as opposed to a management level). This inventory has been completed in various stages, between 2013 and 2014, and delineation via softcopy from stereo images acquired in the years 2007 and 2012. The aerial images used for the Haines Junction region (Champagne and Aishihik Traditional Territory) had a ground sample distance (GSD) of 40 cm and were collected in both color and infrared. The aerial imagery in the southcentral Yukon were 1:40,000 black and white hard copy images, scanned at 60 microns or approximately 1m GSD.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This feature delineates forest and vegetation stands in the Yukon at a scale of 1:5,000. It is an operational level forest inventory (as opposed to a management level). This inventory has been completed in various stages, between 2013 and 2014, and delineation via softcopy from stereo images acquired in the years 2007 and 2012. The aerial images used for the Haines Junction region (Champagne and Aishihik Traditional Territory) had a ground sample distance (GSD) of 40 cm and were collected in both color and infrared. The aerial imagery in the southcentral Yukon were 1:40,000 black and white hard copy images, scanned at 60 microns or approximately 1m GSD.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Predicted cation exchange capacity (meq/100g) at a defined depth range (0–5 cm, 5–15 cm, 15–30 cm, 30–60 cm, 60–100 cm). The interchange of a cation in solution and another cation on the surface of any surface-active material such as clay colloid or organic colloid.

Forest Percentage Above 2m 2015Percentage of first returns above 2 m (%). Represents canopy cover. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011