The Major Projects Inventory (MPI), which is published quarterly, lists all major projects that are proposed, planned or underway in British Columbia. These are projects with a capital cost of at least $20 million each within the Lower Mainland and projects valued at $15 million or more in the rest of B.C. This is a point layer. To view the Major Projects Inventory in the BC Economic Atlas [click here]( http://maps.gov.bc.ca/ess/hm/bcea/?catalogLayers=5178)

This dataset is produced for the Government of Alberta and is available to the general public. Note that the distribution contact is different for the general public than for Government of Alberta ministries. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset. The National Topographic System of Canada (NTS) is a national mapping reference grid defined by Natural Resources Canada (NRCan) that is based on degrees of latitude and longitude. Starting at the Prime Meridian and at the Equator, the 1:50 000 grid is formed by intersecting every 1/8 degree of the meridians with every 1/4 degrees of parallels. It is also true that the standard 1:20 000 NTS block is broken down into 4 1:20 000 blocks that are labelled by quadrant. Each polygon in the grid is designated with a two digit number. a single letter. two additional numbers and a two letter quadrant value (Example 83H08NE). The 1:20 000 NTS grid was developed to support the Provincial Digital Base Mapping Project and is not part of the formal NRCan NTS program. The province of Alberta is covered by 2838 complete and 269 partially complete 1:20 000 NTS blocks.

Data provided shows grants and contributions provided to Canadian firms by National Research Council (NRC) and its Industrial Research Assistance Program (IRAP) between April 1, 2019 and March 31, 2020.

Landscape hazard maps were completed as part of a community hazards mapping program coordinated by the Northern Climate ExChange (Yukon Research Centre, Yukon College). Potential landscape hazards were assessed under changing future conditions by incorporating a variety of data sets, including surficial geology, topography (slope and aspect), permafrost distribution, site-specific permafrost data (e.g. ground penetrating radar, electrical resistivity tomography and borehole data), analyses of past hydrological and climatological trends, and future climate projections. The landscape hazard map identifies existing and potential geological hazards such as landslides, permafrost stability and flooding. The hazard map is presented in stoplight colours to provide an intuitive tool for community decision makers aiming to incorporate an adaptation planning framework into existing land use management practices. Detailed descriptions of data inputs and hazard analysis methodology are presented in an accompanying report (available for download from [https://data.geology.gov.yk.ca/Reference/68410](https://data.geology.gov.yk.ca/Reference/68410) ). An accompanying surficial geological map also describes detailed landscape characteristics such as surface landscape features, sediment texture, genetic material, surface expression and geomorphological processes (available for download from [https://data.geology.gov.yk.ca/Reference/68410](https://data.geology.gov.yk.ca/Reference/68410) ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset presents the first comprehensive, high-resolution (10-meter) wetland inventory map covering the entire 32.2 million square kilometers of the Pan-Arctic region, of which 14 million square kilometers (43%) is terrestrial and 18.4 million square kilometers (57%) is marine. Generated through advanced Earth Observation and machine learning techniques, the map was produced using multi-year (2020–2022), multi-source satellite imagery—including Sentinel‑1, Sentinel‑2, and ALOS PALSAR‑2—as well as various environmental features such as elevation. Over 1,000 wetland polygons were analyzed using an object-based random forest classification workflow on the Google Earth Engine cloud platform, achieving an average overall classification accuracy of 89%.The mapping extent was defined according to the Arctic Council’s Conservation of Arctic Flora and Fauna (CAFF) boundary, resulting in the identification of 2,947,618 km² of wetlands, representing 20% of the land area within the Pan-Arctic region. This dataset establishes a consistent and authoritative baseline for pan-Arctic wetlands, leveraging the latest advances in Earth Observation, machine learning, and cloud computing. The Canadian Wetland Classification System was used and includes the major wetland classes: bog, fen, marsh, swamp, and water.The overall wetlands coverage by country within the CAFF boundary was: Canada (27%), United States of America (i.e., Alaska 39%), Finland (31%), Iceland (8%), Norway (17%), Sweden (26%), Kingdom of Denmark (i.e., Greenland 1%), and the Russian Federation (21%).​Development of this product was undertaken by Natural Resource Canada's Canada Centre for Mapping and Earth Observation and the Canadian Geospatial Data Infrastructure Division in collaboration with the Arctic Council’s CAFF biodiversity group, CAFF Wetland Experts Group, national organisations mandated to monitor wetlands, and Arctic National Mapping Agencies, and Canadian company C-CORE, integrating ground truth data collected from Alaska, Finland, Sweden, and the Kingdom of Denmark through partner agencies and digital image interpretation. More than 60,000 images (2020-2022), primarily covering summer periods, were processed to ensure robust results.This dataset provides essential baseline information for Earth Observation monitoring of climate change impacts and supports critical environmental surveillance for Arctic and remote northern communities.

BCGS 1:20,000 scale grid. The British Columbia Geographic System is a geographic system in which the coverage in minutes and seconds of longitude is double the coverage in minutes and seconds of latitude for sheets at all scales

Landscape hazard maps were completed as part of a community hazards mapping program coordinated by the Northern Climate ExChange (Yukon Research Centre, Yukon College). Potential landscape hazards were assessed under changing future conditions by incorporating a variety of data sets, including surficial geology, topography (slope and aspect), permafrost distribution, site-specific permafrost data (e.g. ground penetrating radar, electrical resistivity tomography and borehole data), analyses of past hydrological and climatological trends, and future climate projections. The landscape hazard map identifies existing and potential geological hazards such as landslides, permafrost stability and flooding. The hazard map is presented in stoplight colours to provide an intuitive tool for community decision makers aiming to incorporate an adaptation planning framework into existing land use management practices. Detailed descriptions of data inputs and hazard analysis methodology are presented in an accompanying report (available for download from [https://data.geology.gov.yk.ca/Reference/50309](https://data.geology.gov.yk.ca/Reference/50309) ). An accompanying surficial geological map also describes detailed landscape characteristics such as surface landscape features, sediment texture, genetic material, surface expression and geomorphological processes (available for download from [https://data.geology.gov.yk.ca/Reference/50309](https://data.geology.gov.yk.ca/Reference/50309) ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This theme represents the limit of the Quebec territory of the Agreement on Sustainable Water Resources of the Great Lakes and St. Lawrence River Basin. It was generated from the grouping of watersheds at a cartographic scale of 1:20,000. For more information: http://www.environnement.gouv.qc.ca/eau/grandslacs/2005/index.htm**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The level curves are derived from a LiDAR survey carried out in May 2014.The equidistance is 25 cm, the absolute planimetric accuracy (XY) isof approximately 40 cm and the absolute altimeter accuracy (Z) is approximately 20 cm.The urban sectors covered are the urban perimeters of Rouyn, Noranda,Granada, Évain (partially), Lac-Dufault and the airport.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Landscape hazard maps were completed as part of a community hazards mapping program coordinated by the Northern Climate ExChange (Yukon Research Centre, Yukon College). Potential landscape hazards were assessed under changing future conditions by incorporating a variety of data sets, including surficial geology, topography (slope and aspect), permafrost distribution, site-specific permafrost data (e.g. ground penetrating radar, electrical resistivity tomography and borehole data), analyses of past hydrological and climatological trends, and future climate projections. The landscape hazard map identifies existing and potential geological hazards such as landslides, permafrost stability and flooding. The hazard map is presented in stoplight colours to provide an intuitive tool for community decision makers aiming to incorporate an adaptation planning framework into existing land use management practices. Detailed descriptions of data inputs and hazard analysis methodology are presented in an accompanying report (available for download from [https://data.geology.gov.yk.ca/Reference/50310](https://data.geology.gov.yk.ca/Reference/50310) ). An accompanying surficial geological map also describes detailed landscape characteristics such as surface landscape features, sediment texture, genetic material, surface expression and geomorphological processes (available for download from [https://data.geology.gov.yk.ca/Reference/50310](https://data.geology.gov.yk.ca/Reference/50310) ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)