Maximum Temperature represents the highest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.

Heat Wave represents the consecutive number of days (April 1 – October 31) where the maximum daily temperature is greater than 25 or 30 degrees respectively. Heat wave products are only generated during the Growing Season, April 1 through October 31.

Crop Heat Units (CHU) are calculated on a daily basis, using the maximum and minimum temperatures in order to account for a crop’s negative response to higher temperatures.The formula used to calculate the CHU value for a day is: (1.8 × (Minimum Temperature − 4.4) + 3.33 × (Maximum Temperature − 10) − 0.084 × (Maximum Temperature − 10)²) ÷ 2.0CHU values are only accumulated during the Growing Season, April 1 through October 31.

Level curves with an equidistance of 1 m derived from a lidar survey conducted in 2024.attributes:ID - Unique IDSubtype - Master (1) or secondary (2) level curve SCORE - Elevation value (m) The High Resolution Digital Elevation Model (m) product The High Resolution Digital Elevation Model (HRDM) product is available on the Open Government website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Minimum Temperature represents the lowest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.

This service shows the ratio of persons aged 0 to 14 and 65 and over (children and seniors) versus persons aged 15 to 64 (working-age) by census division. The data is a custom extraction from the 2016 Census - 100% data.This data pertains to the total population by age. 'Age' refers to the age at last birthday before the reference date, that is, before May 10, 2016. For additional information refer to 'Age' in the 2016 Census Dictionary.For additional information refer to 'Age' in the 2016 Census Dictionary.To have a cartographic representation of the ecumene with this socio-economic indicator, it is recommended to add as the first layer, the “NRCan - 2016 population ecumene by census division” web service, accessible in the data resources section below.

The annual maximum and minimum daily data are the maximum and minimum daily mean values for a given year.

This service shows the ratio of persons aged 0 to 14 and 65 and over (children and seniors) versus persons aged 15 to 64 (working-age) by census subdivision. The data is a custom extraction from the 2016 Census - 100% data.This data pertains to the total population by age. 'Age' refers to the age at last birthday before the reference date, that is, before May 10, 2016. For additional information refer to 'Age' in the 2016 Census Dictionary.For additional information refer to 'Age' in the 2016 Census Dictionary.To have a cartographic representation of the ecumene with this socio-economic indicator, it is recommended to add as the first layer, the “NRCan - 2016 population ecumene by census subdivision” web service, accessible in the data resources section below.

Growing degree days (GDDs) are used to estimate the growth and development of plants and insects during the growing season. Growing Degree Day are computed by subtracting a base value temperature from the mean daily temperature and are assigned a value of zero if negative. Base temperatures are a point below which development does not occur for the organism in question. Growing Degree Day products are created for base 0, 5, 10 and 15 degrees Celsius.GDD values are only accumulated during the Growing Season, April 1 through October 31.

This dataset represents meat weight and shell height data of commercial size Sea Scallop (Placopecten magellanicus; ≥ 80 mm shell height) from 2011-2023 from the Bay of Fundy Inshore Scallop Survey collected from June to mid-August. Wet meat weights were recorded to a tenth of a gram and shell heights are measured in millimeters. Meat weights and shell heights are sampled from a subset of scallops caught on survey and this detailed sampling is conducted from approximately half of the tows conducted. Each row in the dataset represents an individual scallop and contains information such as tow number, tow date, cruise name, geographical coordinates (decimal degrees, WGS 84) and the Scallop Production Area in which the tow took place. Survey protocols are documented in Glass (2017). This dataset contains tow data from a comparative survey conducted in 2012 (Smith et al., 2013). Further, these data correspond to the publication of Hebert et al. (2025).ReferencesGlass, A. 2017. Maritimes Region Inshore Scallop Assessment Survey: Detailed Technical Description. Can. Tech. Rep. Fish. Aquat. Sci. 3231: v + 32 p.Hebert, N, Sameoto, J.A., Keith, D.M., Murphy, O.A., Brown, C.J., Flemming, J. 2025. Interannual variability in the length–weight relationship can disrupt the abundance–biomass correlation of sea scallop (Placopecten magellanicus). ICES. J. Mar. Sci. Smith, S.J., Glass, A., Sameoto. J., Hubley, B., Reeves, A., and Nasmith, L. 2013. Comparative survey between Digby and Miracle drag gear for scallop surveys in the Bay of Fundy. DFO Can. Sci. Advis. Sec. Res. Doc. 2012/161. iv + 20 p.Cite this data as: Sameoto, J.A. Data of: Bay of Fundy Sea Scallop Meat Weight and Shell Height Data 2011 to 2023. Published: December 2025. Population Ecology Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/65d32794-2d81-4682-b0ea-8d8bbe907a58