Maximum Temperature represents the highest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.

The Canadian Precipitation Analysis System (CaPA) produces a best estimate of 6 and 24 hour precipitation amounts. This objective estimate integrates data from in situ precipitation gauge measurements, radar QPEs and a trial field generated by a numerical weather prediction system. In order to produce the High Resolution Deterministic Precipitation Analysis (HRDPA) at a resolution of 2.5 km, CaPA is connected to the continental HRDPS for its trial field. CaPA-HRDPA produces four analyses of 6 hour amounts per day, valid at synoptic hours (00, 06, 12 and 18 UTC) and two 24 hour analyses valid at 06 and 12 UTC. A preliminary production is started 1 hour after valid time and a final one is launched 7 hours later. This translates into a production of 12 analyses per day.

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the **Universal Transverse Mercator** (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator. This data class shows a 5 km x 5 km grid coordinate system based on the UTM projection using the North American Datum 83 (NAD83). It includes a UTM Map Sheet Number.

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the **Universal Transverse Mercator** (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator.This data class shows a 100 km x 100 km grid coordinate system based on the UTM projection using the North American Datum 83 (NAD83). It includes: * Military Grid Reference * Atlas identifier

The Canadian Precipitation Analysis System (CaPA) produces a best estimate of 6 and 24 hour precipitation amounts. This objective estimate integrates data from in situ precipitation gauge measurements, radar QPEs and a trial field generated by a numerical weather prediction system. In order to produce the High Resolution Deterministic Precipitation Analysis (HRDPA) at a resolution of 2.5 km, CaPA is connected to the continental HRDPS for its trial field. CaPA-HRDPA produces four analyses of 6 hour amounts per day, valid at synoptic hours (00, 06, 12 and 18 UTC) and two 24 hour analysis valid at 06 and 12 UTC. A preliminary production is started 1 hour after valid time and a final one is launched 7 hours later. This translates into a production of 12 analyses per day.

This WebMap comprises of two layers , namely, HRDPA Observed Accumulated Precipitation - Past 1 day, 3 days and 7 days (feature layer) ; and HRDPA SubBasin Precipitation Distribution - Past 1 day, 3 day, and 7 days (feature layer).HRDPA is ECCC’s high-resolution precipitation analysis, merging gauge, radar, and HRDPS model data. CaPA-HRDPA produces four analyses of 6 hour amounts per day, valid at synoptic hours (00, 06, 12 and 18 UTC) and two 24 hour analysis valid at 06 and 12 UTC. A preliminary production is started 1 hour after valid time and a final one is launched 7 hours later. This translates into a production of 12 analyses per day.

The Regional Deterministic Precipitation Analysis (RDPA) produces a best estimate of precipitation amounts that occurred over a period of 6 hours. The estimate integrates data from in situ precipitation gauge measurements, weather radar, satellite imagery and numerical weather prediction models. Geographic coverage is North America (Canada, United States and Mexico). Data is available at a horizontal resolution of 10 km. The 6 hour analysis is produced 4 times a day and is valid at 00, 06, 12 and 18 UTC. A preliminary analysis is available approximately 1 hour after the end of the accumulation period and a final one is generated 7 hours later in order to assimilate more gauge data.

This data report provides information on temperature and salinity in the Godbout region of the St. Lawrence Estuary. Sampling was carried out from 2019 to 2021 over an area of <5 km2. The databases provide information on temperature and salinity at an hourly rate for 2 years. The aim of this project is to analyze telemetry data from sea urchins (Strongylocentrotus droebachiensis), snow crabs (Chionoecetes opilio), rock crabs (Cancer irroratus), spider crabs (Hyas spp.) and whelks (Buccinum undatum). This report focuses on the presentation of benthic environmental data collected throughout the study with high spatial and temporal resolution. All reported variables were collected at the seafloor, as the aim of the project was to study the movement of epibenthic species. Temperature data were collected from three devices: telemetry receivers with integrated temperature sensors (InnovaseaTM), HoboTM and Star-OddiTM probes. Temperature data processing involved cleaning up extreme values (below 2°C and above 20°C) and homogenizing the data to fit the bathymetry matrix (1m x 1m cells) of the study site. Temperature data are provided in a NetCDF file with a matrix of the entire study site, where there is a stratum for each hour between August 2019 and October 2021 and in each file, a temperature value for each pixel of the raster. Salinity data were collected from Star-OddiTM probes only. Salinity values were averaged hourly for the entire study area. Salinity data is provided as a CSV file with one salinity value per hour for the entire study area.

The Regional Deterministic Precipitation Analysis (RDPA) produces a best estimate of precipitation amounts that occurred over a period of 24 hours. The estimate integrates data from in situ precipitation gauge measurements, weather radar, satellite imagery and numerical weather prediction models. Geographic coverage is North America (Canada, United States and Mexico). Data is available at a horizontal resolution of 10 km. The 24 hour analysis is produced twice a day and is valid at 06 and 12 UTC. A preliminary analysis is available approximately 1 hour after the end of the accumulation period and a final one is generated 7 hours later in order to assimilate more gauge data.

This polygon layer presents 7‑day and 10‑day accumulated precipitation forecasts from the Global Deterministic Prediction System (GDPS), aggregated by sub-basin. It is designed to help hydrologists, water resource managers, and emergency planners pinpoint watersheds facing higher rainfall or snowfall totals in the medium-to-long range, enabling proactive flood risk assessment, drought monitoring, and resource allocation.Developed by Environment and Climate Change Canada (ECCC), the GDPS is a global numerical weather prediction model running at approximately 15km resolution, updated twice daily (00Z and 12Z). This layer integrates 168-hour (7‑day) and 240-hour (10‑day) precipitation forecasts into sub-basin polygons, offering a comprehensive view of expected cumulative precipitation. By focusing on watershed boundaries, decision-makers can quickly gauge regional vulnerabilities to prolonged rainfall or snowfall events.Key highlights: Global Model Insight: Captures large-scale, multi-day weather systems (e.g., atmospheric rivers, persistent low-pressure systems). Sub-Basin Aggregation: Delivers averaged precip values per basin, simplifying hydrological analysis for flood or drought outlooks. Extended Outlook: Spanning from day 0 to day 10, covers both medium- and longer-term forecast horizons, essential for strategic planning and mitigation efforts. Typical Uses:Flood Forecasting – Identifying basins prone to heavy or prolonged precipitation. Water Resource Management – Adjusting reservoir release schedules or irrigation planning based on expected accumulations. Emergency Preparedness – Deploying resources or issuing advisories in vulnerable watersheds.