This dataset represents the digital compilation of the Mineral Assessment Airborne surveys of the Province of Saskatchewan.This dataset represents the digital compilation of the Mineral Assessment Airborne surveys of the Province of Saskatchewan.  This data shows Mineral Assessment Work Catalogue: Outlines of areas and descriptions of work submitted for mineral assessment credits (Airborne surveys). This is an ongoing assemblage of mineral assessment airborne surveys. The data was created as a file geodatabase feature class and output for public distribution.**Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule.

Quantitative gamma-ray spectrometric and aeromagnetic helicopter-borne geophysical survey was completed by Fugro Airborne Surveys. The survey was flown from September 10 to October 14, 2008. The nominal traverse and control line spacings were 400 m and 2400 m respectively, and the aircraft flew at a nominal terrain clearance of 125 m. Traverse lines were oriented at 0 degrees with orthogonal control lines.

The Airborne Radionuclide Concentrations (ARC) Dataset is a general dataset of airborne radionuclide concentrations analyzed at the Radiation Protection Bureau (RPB). The RPB is responsible for delivering Health Canada’s program in the area of ionizing radiation protection. This dataset includes radionuclide concentrations at locations in RPB’s Canadian air monitoring networks including its Comprehensive Nuclear Test-Ban Treaty (CTBT) stations and the Canadian Radiological Monitoring Network (CRMN). The dataset may also include additional airborne radionuclide concentration data from other networks, fieldwork and any additional data collected during emergencies.The dataset shows concentrations of airborne radionuclides that were targeted for analysis and detected, for example, Beryllium-7 (7Be), Lead-210 (210Pb), Cesium-134 (134Cs), Cesium-137 (137Cs), Iodine-131 (131I), Xenon-133 (133Xe), and Xenon-135 (135Xe), among others. The data is presented in xml file format, selected to conform to the International Atomic Energy Agency’s (IAEA) International Radiological Information Exchange (IRIX) Format. The IRIX format is used to facilitate the exchange of web-based emergency data and information to help organizations respond to radiological incidents and emergencies.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

This map of the residual total magnetic field was derived from data acquired during an aeromagnetic survey carried out by Goldak Airborne Surveys during the period May 16, 2009 to July 1, 2009. The data were recorded using a split-beam cesium vapour magnetometer mounted in the tail boom of a Piper Navajo aircraft. The nominal traverse and control line spacings were 400 m and 2400 m, respectively, and the aircraft flew at a nominal terrain clearance of 150 m.

This map of the first vertical derivative of the magnetic field was derived from data acquired during an aeromagnetic survey carried out by Goldak Airborne Surveys during the period of May 16 to July 1, 2009. The data were recorded using a split-beam cesium vapour magnetometer mounted in the tail boom of a Piper Navajo aircraft. The nominal traverse and control line spacings were 400 m and 2400 m, respectively, and the aircraft flew at a nominal terrain clearance of 150 m.

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for airborne radioactivity content at monitoring stations across Canada. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are activity concentration, uncertainty and the minimum detectable concentration for the naturally occurring radionuclides, beryllium-7 (7Be) and lead-210 (210Pb), and the anthropogenic (originating from human activity) radionuclides, cesium-134 (134Cs), cesium-137 (137Cs), and iodine-131 (131I). The data comes from the analysis of particulates accumulated in filter media, drawn by high-volume air samplers fixed in the field. Such data is typically dominated by natural radionuclides, such as 7Be and 210Pb. 7Be is a natural cosmogenic radionuclide that is produced in the upper atmosphere when cosmic rays bombard oxygen and nitrogen. 210Pb is also a natural radioisotope that results from the decay of uranium (238U) to radium (226Ra). 238U comes from the soil and eventually decays to 210Pb. Radon-222, which is a natural radioactive gas, is also a part of this decay chain. Radon moves through the soil and becomes diluted in the atmosphere. If a home is built on soil or rocks that contain uranium, radon can seep into homes and may accumulate to high levels. More information about the Health Canada radon program can be found on the Health Canada website. For all our stations, the airborne radioactivity data shows a small increase in the activity concentration of 134Cs, 137Cs and 131I measured between March and May of 2011, attributable to the nuclear accident at the Fukushima-Daiichi Nuclear Power Station. It is important to note that, even at their respective peaks, the measured activity concentrations of 134Cs, 137Cs and 131I represent only a small fraction of typical background exposure from natural sources of radiation. Occasionally, other small increases in activity concentration of anthropogenic radionuclides are observed. Spikes in 137Cs activity are often associated with forest fires, which can lead to the re-suspension of 137Cs already present in the environment, most likely from atmospheric nuclear weapons testing in the 1960’s. Detection of small amounts of 131I is commonly associated with its medical use by hospitals.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

The High Resolution Digital Elevation Model (HRDEM) product is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The complete coverage of the Canadian territory is gradually being established. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived data. For DTM datasets, derived data available are slope, aspect, shaded relief, color relief and color shaded relief maps and for DSM datasets, derived data available are shaded relief, color relief and color shaded relief maps.The productive forest line is used to separate the northern and the southern parts of the country. This line is approximate and may change based on requirements. In the southern part of the country (south of the productive forest line), DTM and DSM datasets are generated from airborne LiDAR data. They are offered at a 1 m or 2 m resolution and projected to the UTM NAD83 (CSRS) coordinate system and the corresponding zones. The datasets at a 1 m resolution cover an area of 10 km x 10 km while datasets at a 2 m resolution cover an area of 20 km by 20 km. In the northern part of the country (north of the productive forest line), due to the low density of vegetation and infrastructure, only DSM datasets are generally generated. Most of these datasets have optical digital images as their source data. They are generated at a 2 m resolution using the Polar Stereographic North coordinate system referenced to WGS84 horizontal datum or UTM NAD83 (CSRS) coordinate system. Each dataset covers an area of 50 km by 50 km. For some locations in the north, DSM and DTM datasets can also be generated from airborne LiDAR data. In this case, these products will be generated with the same specifications as those generated from airborne LiDAR in the southern part of the country.The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013), which is now the reference standard for heights across Canada.Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The tiles are aligned within each project.The product High Resolution Digital Elevation Model (HRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan. Collaboration is a key factor to the success of the National Elevation Data Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

The LiDAR Point Clouds is a product that is part of the CanElevation Series created to support the National Elevation Data Strategy implemented by NRCan.This product contains point clouds from various airborne LiDAR acquisition projects conducted in Canada. These airborne LiDAR acquisition projects may have been conducted by NRCan or by various partners. The LiDAR point cloud data is licensed under an open government license and has been incorporated into the National Elevation Data Strategy.Point cloud files are distributed by LiDAR acquisition project without integration between projects.The point cloud files are distributed using the compressed .LAZ / Cloud Optimized Point Cloud (COPC) format. The COPC open format is an octree reorganization of the data inside a .LAZ 1.4 file. It allows efficient use and visualization rendering via HTTP calls (e.g. via the web), while offering the capabilities specific to the compressed .LAZ format which is already well established in the industry. Point cloud files are therefore both downloadable for local use and viewable via URL links from a cloud computing environment.The reference system used for all point clouds in the product is NAD83(CSRS), epoch 2010. The projection used is the UTM projection with the corresponding zone. Elevations are orthometric and expressed in reference to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013).

Airborne electromagnetic/magnetic survey data were acquired for the area between April 17 and April 30, 2015. The aircraft flight elevation was maintained at a nominal ground clearance of 83 m. Aircraft navigation used a 12-channel NovaTel dual frequency GPS. A vertically mounted video camera was used to record images of the ground. The radar height was recorded ten times per second using a Sperry unit and the barometric altitude was recorded ten times per second using a Motorola altitude transducer. The magnetic data were recorded 10 times per second using a Scintrex CS-2 cesium-vapor magnetometer.

The DND Air Weapons Range dataset is comprised of all the polygons that represent the Air Weapons Range established by the Department of National Defence, Government of Canada, within the Province of Alberta. Air Weapons Range is the area used as a practice and firing range with restricted access provisions and which is owned and operated by the Department of National Defence, Government of Canada.