Home /Search
Search datasets
We have found 47 datasets for the keyword " alosa pseudoharengus". You can continue exploring the search results in the list below.
Datasets: 106,578
Contributors: 42
Results
47 Datasets, Page 1 of 5
Coleophora serratella
Historical finds of Coleophora serratella
Biodiversity of the Benthic Epifauna Trawl Survey from KEBABB program (2021)
This resource documents a dataset of epifauna occurrences collected in 2021 during The Knowledge and Ecosystem-Based Approach in Baffin Bay (KEBABB) program developed by the Department of Fisheries and Oceans Canada (DFO) in collaboration with university partners. The overall objective of KEBABB is to characterize the variability and trends in physical, chemical, and biological oceanographic conditions and food webs supporting fisheries in the connected ecosystems of western Baffin Bay and Lancaster Sound. In 2021, DFO expanded the KEBABB program to Barrow Strait (KEBABS-Knowledge and Ecosystem-Based Approach in Barrow Strait), a key productive area of the Tallurutiup Imanga National Marine Conservation Area. The study took place in the Eastern Canadian Arctic (mainly in Baffin Bay, Davis Strait and Barrow Strait). Sampling is done along transects at fixed stations in the study area. Catches are collected with a 1.5 m Agassiz trawl (5 mm mesh net) for 3 minutes bottom-contact time at a target speed of 1.5 knots and with a 3 m benthic beam trawl (6.4 mm mesh net) for 15 minutes bottom-contact time at a target speed of 3 knots. A total of 16 stations were sampled for epifauna in 2021 between 85-850 m depth. Epibenthic invertebrates are identified to the lowest possible taxonomic level and photographed. All unknown specimens are frozen. In the lab, the identifications are validated or refined with the photos and the frozen specimens.The data are presented in Darwin Core and are separated in two files:The “Activité_épifaune_KEBABB_epifauna_event_en” file which contains information about missions, stations and deployments, which are presented under a hierarchical activity structure.The “Occurrence_épifaune_KEBABB_epifauna_en” file that contains the taxonomic occurrences.Further details on sampling can be found in the following report: Pućko, M., Charette, J., Tremblay P., Brulotte S., St-Denis B., Ciastek S., Hedges, K., Kuzyk, Z., Roy V., and Michel, C. 2022. An ecosystem-based approach in the eastern Arctic: KEBABB/S (Knowledge and Ecosystem-Based Approach in Baffin Bay/Barrow Strait) 2021 expedition report. Can. Manuscr. Rep. Fish. Aquat. Sci. 3250: viii + 58 p. https://publications.gc.ca/collections/collection_2022/mpo-dfo/Fs97-4-3250-eng.pdfUSE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.
Operophtera brumata
Historical finds of Operophtera brumata
Development of a coastal species characterization approach using environmental DNA (eDNA) using the marker COI
Species characterization by environmental DNA (eDNA) is a method that allows the use of DNA released into the environment by organisms from various sources (secretions, faeces, gametes, tissues, etc.). It is a complementary tool to standard sampling methods for the identification of biodiversity. This project provides a list of invertebrates species whose DNA has been detected in water samples collected at 2018 using the marker COI.The surveys were carried out in the summer of 2018 from August 11 to 14, between Forestville and Godbout (Haute-Côte-Nord). Sampling was carried out between 9-52 meters depth in 40 stations with one sample par station. Two liters of water were filtered through a 1.2 µm fiberglass filter. DNA extractions were performed with the DNeasy Blood and Tissue extraction kit (Qiagen). Negative field, extraction and PCR controls were added at the different stages of the protocol. Libraries at the COI locus were prepared by Genome Quebec and sequenced on an Illumina MiSeq PE250 system. The bioinformatics analysis of the sequences obtained was carried out using an in-house analysis pipeline as reported in Bourret et al. 2022. A first step made it possible to obtain a molecular operational taxonomic unit table (MOTU) using the cutadapt software for the removal of the adapters and the DADA2 R package for the filtration, fusion, chimera removal and data compilation. The MOTUs table was subsequently corrected by taking into account the negative controls, where the number of observations in the latter was removed from the linked samples. Singleton MOTUs have also been removed. Finally, the taxonomic assignments were carried out on the MOTUs using the IDTAXA classifier (present in the DECIPHIER R package) using a training set trained on the COI reference bank for Golf St-Laurent (GSL-rl v1.0, https://github.com/GenomicsMLI-DFO/MLI_GSL-rl) and a threshold of 40. Detections with an “Unreliable due to gaps” category were reported at the genus level only.The file provided includes generic activity information, including site, station name, date, marker type, assignment types used for taxa identification, and a list of taxa or species. The list of taxa has been verified by a biodiversity expert from the Maurice-Lamontagne Institute.This project was funded by Fisheries and Oceans Canada's Coastal Environmental Baseline Data Program under the Oceans Protection Plan. This initiative aims to acquire baseline environmental data that contributes to the characterization of significant coastal areas and supports evidence-based assessments and management decisions to preserve marine ecosystems.Data are also available on SLGO platform : https://doi.org/10.26071/ogsl-cd4c205b-f63b
Coleophora laricella
Historical finds of Coleophora laricella
Biodiversity of the Benthic Epifauna Trawl Survey from CBS-MEA program (2021-2024)
This dataset documents the epifauna occurrences collected from 2021 to 2024 during the Canadian Beaufort Sea Marine Ecosystem Assessment (CBS-MEA) conducted by the Department of Fisheries and Oceans (DFO). This scientific program focuses on the integration of oceanography, food web linkages, physical-biological couplings, and spatial and interannual variabilities. The program also aims to expand the baseline coverage of species diversity, abundances, and habitat associations in previously unstudied areas of the Beaufort Sea and Western Canadian Archipelago. The study took place mainly in the Canadian Beaufort Sea and the Amundsen Gulf. Sampling is done along transects at fixed stations in the study area. Catches are collected with a 3 m benthic beam trawl for 10 minutes bottom-contact time at a target speed of 2 knots and with a modified Atlantic Western IIA otter trawl for 20 minutes bottom-contact time at a target speed of 2.9 knots. A total of 32 stations were sampled for epifauna in 2021, 22 in 2022, 23 in 2023 and 22 in 2024, between 22-655 m depth. Epibenthic invertebrates were identified to the lowest taxonomic level possible and photographed. All unknown specimens are frozen. In the lab, the identifications are validated or refined with the photos and the frozen specimens.The data are presented in Darwin Core and are separated in two files:The "Activité_épifaune_CBSMEA_epifauna_event_en" file which contains information about missions, stations and deployments, which are presented under a hierarchical activity structure.The "Occurrence_épifaune_CBSMEA_epifauna_en" file that contains the taxonomic occurrences.
Fenusa pumila
Historical finds of Fenusa pumila
Adelges abietis
Historical finds of Adelges abietis
Coastal biodiversity of the benthic epifauna of the St. Lawrence Estuary (2018-2019)
The North Shore of the Lower Estuary (Upper North Shore, Quebec) is a productive coastal system where many commercial species of benthic invertebrates are fished in the infralittoral (10-20 m) and circalittoral (20-50 m) zone. However, little data exist on the biodiversity of non-commercial species and the environmental characteristics of the benthic habitat in this area. Two scientific surveys were conducted in 2018 and 2019 to address this knowledge gap by developing a framework of biodiversity and environmental (water column and seafloor) data taking that will be used to determine the baseline state of the benthic ecosystem in this region.Surveys were conducted in 2018 (August 11-14) and 2019 (July 30-August 5) in the Upper North Shore region (between the towns of Forestville and Godbout). Surveys followed a fixed sampling design of eight transects perpendicular to bathymetry with stations at 10 m depth intervals in a bathymetry range of 10-50 m for a total of approximately 40 stations per survey. Specimens were collected with a beam trawl with an opening of 2.8 m. The hauls were made at a target speed of 2 knots and a target duration of 7 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library of R. The average tow distance was approximately 425 m. The area covered at each tow was the product of the trawl opening and the distance traveled. The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic event information, including date and location. The "additional_information_event_and_occurrence" file includes sample size, sampling protocol and sampling effort, among others. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. For abundance and biomass estimates, contact Virginie Roy (virginie.roy@dfo-mpo.gc.ca). For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. Special cases were noted in "identificationRemarks" and selected specimens were confirmed using field photos. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.
Taxonomic and Genetic Diversity of Decapods in Northeast Pacific, Canadian Arctic and Northwest Atlantic
An exploratory project on the taxonomic and genetic diversity of decapods in three ocean subregions (Northeast Pacific, Canadian Arctic, and Northwest Atlantic), which were sampled in 2022, was undertaken by the Arctic Working Group under the Canada-U.S. Fisheries and Climate Collaboration between Fisheries and Oceans Canada (DFO) and the National Marine Fisheries Service (NMFS) of the National Oceanic and Atmospheric Administration (NOAA). This collaboration framework aims to pool Canadian and U.S. data to explore the impacts of broad-scale climate change on marine biodiversity. In early summer 2022, a sampling protocol with the selection of targeted decapods was provided to DFO and NOAA collaborators. Targeted genera were collected from a total of 10 research programs across three ocean subregions and four marine regions. The Northeast Pacific samples were collected in the Bering Sea during the Northern Bering Sea Ecosystem and Surface Trawl Survey, and the Eastern and Northern Bering Sea Continental Shelf Bottom Trawl Survey of Groundfish and Invertebrate Fauna onboard the F/V Northwest Explorer, F/V Alaska Knight and F/V Vesteraalen. In the Western Canadian Arctic (mainly from Beaufort Sea and Amundsen Gulf), specimens were collected during DFO’s Canadian Beaufort Sea – Marine Ecosystem Assessment (CBS-MEA) survey onboard the F/V Frosti. In Eastern Canadian Arctic (mainly from Baffin Bay and Davis Strait), specimens were collected during DFO’s Knowledge and Ecosystem-Based Approach in Baffin Bay (KEBABB) survey onboard the CCGS Amundsen and DFO’s North Atlantic Fisheries Organization (NAFO) Subarea 0B survey onboard the R/V Tarajoq. In the Estuary and Gulf of St. Lawrence (EGSL), specimens were collected from coastal surveys (scallops, sea cucumber, snow crab, and whelk surveys) onboard the CCGS Leim and offshore during the Ecosystemic Survey onboard the CCGS Teleost. Decapods were collected from various sampling gears (benthic beam trawl, modified Atlantic Western IIA otter trawl, Bacalao trawl, shrimp trawl, Digby scallop dredge, or modified sea cucumber dredge) and identified to the lowest possible taxonomic level and photographed, when possible. All specimens were frozen at sea (n = 995). In the lab, the identifications were validated or refined with the photos and the frozen specimens. DNA was extracted for 87 specimens and a section of COI gene was amplified in order to be sequenced using Sanger method. Sequences were compared with existing data using The Basic Local Alignment Search Tool (BLAST) in the National Center for Bio-technology Information Nucleotide database (NCBI-nt, including the GenBank database) to compare scientific names, where available.The present dataset includes 391 decapod species occurrences. DNA was extracted for a subset of 87 specimens (COI gene); sequences are publicly available on BOLD data portal under project code DDAO (see supporting document "citations_references.csv" for more information).The data are presented in Darwin Core format and are separated in three files:The "Activité_décapodes_DDAO_decapods_event_en" file contains information about missions, stations and deployments, which are presented under a hierarchical activity structure.The "Occurrence_décapodes_DDAO_decapods_en" file contains the taxonomic occurrences.The "ADN_décapodes_DDAO_decapods_DNA_en" file contains the DNA derived data.For further details, please refer to the technical report available in the supporting document named "citations_references.csv". USE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback