Home /Search
Search datasets
We have found 1,156 datasets for the keyword " anthropogenic environment". You can continue exploring the search results in the list below.
Datasets: 103,438
Contributors: 42
Results
1,156 Datasets, Page 1 of 116
Environment
ENV - Environment and conservation (environment)Environmental resources, protection, and conservation. For example, resources describing pollution, waste storage and treatment, environmental impact assessment, environmental risk, and nature reserves. )
Estimates of anthropogenic nitrogen loading and eutrophication indicators for the Bay of Fundy and Scotian Shelf
The excessive input of nitrogen derived from human land-use activities remains a major cause of the eutrophication of coastal ecosystems around the world. However, little data exist on rates of nutrient pollution or its potential impacts to coastal ecosystems in Atlantic Canada. To fill this knowledge gap, a Nitrogen Loading Model (NLM) framework was applied to determine the Total Nitrogen Load (kg TN / yr) from point and non-point source inputs (wastewater, atmospheric deposition, land use, fertilizer applications, and regional industries) in 109 coastal watersheds bordering the Bay of Fundy and Scotian Shelf. To evaluate the potential impact of nitrogen loading, two indicators were calculated for 40 coastal embayments: (1) ∆N, a measure of nitrogen residency that predicts dissolved oxygen problems; and (2) the estuary loading rate, a predictor of the potential for loss of submerged aquatic vegetation. This project was funded by Fisheries and Oceans Canada through a Strategic Program for Ecosystem-based Research and Advice (SPERA) grant. This research has been published in the scientific literature (Kelly et al. 2021). Kelly, N.E., Guijarro-Sabaniel, J. and Zimmerman, R., 2021. Anthropogenic nitrogen loading and risk of eutrophication in the coastal zone of Atlantic Canada. Estuarine, Coastal and Shelf Science, 263, p.107630. doi: https://doi.org/10.1016/j.ecss.2021.107630Cite this data as: Kelly, N.E., Guijarro-Sabaniel, J. and Zimmerman, R. Data of: Estimates of anthropogenic nitrogen loading and eutrophication indicators for the Bay of Fundy and Scotian Shelf. Published: February 2022. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/08746031-1970-4bf6-b6d4-3de2715c8634
2015 - Anthropogenic disturbance footprint within boreal caribou ranges across Canada - As interpreted from 2015 Landsat satellite imagery
As part of a scientific assessment of critical habitat for boreal woodland caribou (Environment Canada 2011, see full reference in accompanying documentation), Environment Canada's Landscape Science and Technology Division was tasked with providing detailed anthropogenic disturbance mapping, across known caribou ranges, as of 2015. This data comprises a 5-year update to the mapping of 2008-2010 disturbances, and allows researchers to better understand the attributes that have a known effect on caribou population persistence. The original disturbance mapping was based on 30-metre resolution Landsat-5 imagery from 2008 -2010. The mapping process used in 2010 was repeated using 2015 Landsat imagery to create a nationally consistent, reliable and repeatable geospatial dataset that followed a common methodology. The methods developed were focused on mapping disturbances at a specific point of time, and were not designed to identify the age of disturbances, which can be of particular interest for disturbances that can be considered non-permanent, for example cutblocks. The resultant datasets were used for a caribou resource selection function (habitat modeling) and to assess overall disturbance levels on each caribou ranges. Anthropogenic disturbances within 51 caribou ranges across Canada were mapped. The ranges were defined by individual provinces and territories across Canada. Disturbances were remapped across these ranges using 2015 Landsat-8 satellite imagery to provide the most up-to-date data possible. As with the 2010 mapping project, anthropogenic disturbance was defined as any human-caused disturbance to the natural landscape that could be visually identified from Landsat imagery with 30-metre multi-band imagery at a viewing scale of 1:50,000. A minimum mapping unit MMU of 2 ha (approximately 22 contiguous 30-metre pixels) was selected. Each disturbance feature type was represented in the database by a line or polygon depending on their geometric description. Polygonal disturbances included: cutblocks, mines, reservoirs, built-up areas, well sites, agriculture, oil and gas facilities, as well as unknown features. Linear disturbances included: roads, railways, powerlines, seismic exploration lines, pipelines, dams, air strips, as well as unknown features. For each type of anthropogenic disturbance, a clear description was established (see Appendix 7.2 of the science assessment) to maintain consistency in identifying the various disturbances in the imagery by the different interpreters. Features were only digitized if they were visible in the Landsat imagery at the prescribed viewing scale. A 2nd interpreter quality-control phase was carried out to ensure high quality, complete and consistent data collection. For this 2015 update an additional, separate higher-resolution database was created by repeating the process using 15-metre panchromatic imagery. For the 30-metre database only, the line and poly data were buffered by a 500-metre radius, representing their extended zone of impact upon boreal caribou herds. Additionally, forest fire polygons were merged into the anthropogenic footprint in order to create an overall disturbance footprint. These buffered datasets were used in the calculation of range disturbance levels and for integrated risk assessment analysis.
Species and Ecosystems at Risk - Publicly Available Occurrences - CDC
The B.C. Conservation Data Centre’s spatial view of publicly available, known locations of species and ecological communities at risk. This spatial view is split into the "Publicly Available Occurrences" layer and "(Extirpated and Historical) Publicly Available Occurrences" layer. The Extirpated and Historical layer includes element occurrences that have a last observation date greater than 40 years ago and element occurrences that are extirpated due to general habitat loss or degradation of the environment in the area. Use the field ‘Rank Description’ to differentiate between Historical and Extirpated element occurrences in this layer. All element occurrences are polygons: the size of the polygon usually reflects the locational uncertainty associated with the source data, represented with varying sized circles. Some polygons may be larger to reflect the actual area covered by the element occurrence. The field "Representational Accuracy" is used to communicate how accurately the polygon reflects the actual area covered by the element. If you do not find an element occurrence in your area of interest, this means there are none currently mapped in the CDC database. The best way to verify whether an area contains a species or ecosystem at risk is to have do a detailed assessment of the property during the appropriate season.
Environment and Sustainable Resource Development Operations Regions
These boundaries are kept for historic purposes only. The Environment and Sustainable Resource Development Operations Regions dataset is comprised of all the polygons that represent the operations regions established for the Ministry of Environment and Parks to provide environmentally responsible services and management of the province's sustainable resources. Environment and Sustainable Resource Development Operations Regions were approved and effective May 29, 2013. These regions were made obsolete when the Ministry of Environment and Parks split into the Ministry of Forestry and Parks and the Ministry of Environment and Protected Areas.
2020 - Anthropogenic disturbance footprint within boreal caribou ranges across Canada - As interpreted from 2020 Landsat satellite imagery
As part of a scientific assessment of critical habitat for boreal woodland caribou (Environment Canada 2011, see full reference in accompanying documentation), Environment Canada's Landscape Science and Technology Division was tasked with providing detailed anthropogenic disturbance mapping, across known caribou ranges, as of 2010. The attached dataset comprises the second 5-year update (first one in 2015) bringing the data up to 2020.The original disturbance mapping was based on 30-metre resolution Landsat-5 imagery from 2008-2010. Since then, anthropogenic disturbances within 51 caribou ranges across Canada were remapped every five years to create a nationally consistent, reliable and repeatable geospatial dataset that followed a common methodology. The ranges were defined by individual provinces and territories across Canada. The methods developed were focused on mapping disturbances at a specific point of time, and were not designed to identify the age of disturbances, which can be of particular interest for disturbances that can be considered non-permanent, for example cutblocks. The resultant datasets were used for a caribou resource selection function (habitat modeling) and to assess overall disturbance levels on each caribou ranges. As with the 2010 mapping project, anthropogenic disturbance was defined as any human-caused disturbance to the natural landscape that could be visually identified from Landsat 30-metre multi-band imagery at a viewing scale of 1:50,000. The same concept was followed for the 2015 and 2020 disturbance mapping and any additional disturbance features that were observed since the original mapping date, were added. The 2015 database was used as a starting point for the 2020 database. Unlike the previous iteration, features were not removed in the mapping process which was a decision made in the name of time. Interpretation was carried out based on the most recent cloud free imagery available up to mid fall for a given year. Each disturbance feature type was represented in the database by a line or polygon depending on their geometric description. Linear disturbances included: roads, railways, powerlines, seismic exploration lines, pipelines, dams, air strips, as well as unknown features. Polygonal disturbances included: cutblocks, harvest (added in 2020), mines, built-up areas, well sites, agriculture, oil and gas facilities, as well as unknown features. For each type of anthropogenic disturbance, a clear description was established (see Appendix 7.2 of the science assessment) to maintain consistency in identifying the various disturbances in the imagery by the different interpreters. Features were only digitized if they were clearly visible in the Landsat imagery at the prescribed viewing scale. In comparison to the previous mapping protocol, one enhancement to the mapping process in 2020 was the addition of CFS harvest polygons (Ref: NRCan-CFS NTEMS; Wulder 2020) into the database prior to interpretation. This considerably reduced the digitizing time for polygons and accelerated the data collection process. The CFS harvest polygons were checked before inclusion, removing some which had been generated erroneously in their process.A 2nd interpreter quality-control phase was carried out to ensure high quality, complete and consistent data collection. Subsequently, the vector data of individual linear and polygonal disturbances were buffered by a 500-metre radius, representing their extended zone of impact upon boreal caribou herds. Additionally, forest fire polygons for the past forty years (CNFDB 1981-2020) were merged into the buffered anthropogenic footprint in order to create an overall disturbance footprint. These buffered datasets were used in the calculation of range disturbance levels and for integrated risk assessment analysis.
Planning and development plan - Environment and natural environments
The land use and development plan puts forward a frame of reference aimed at better knowing, protecting and promoting heritage. The data available in this set mainly comes from the mapping of sections 2.1, 2.3 and 3.1 of the Urban and Urban Plan of Montreal, namely adaptation to climate change, territories of ecological interest, the Green and Blue Grid, the Green and Blue Grid as well as constraints and nuisances.In January 2025, map 15.1 — Wetlands of Interest was added to the Diagram. Resources related to this map are now available:- Wetland of interest to protect or restore- Wetland protection area- Wetland of interest for sustainable use- Coastal wetland or flood zoneThis urban planning and development plan for the agglomeration of Montreal outlines the main parameters that will guide the Montreal agglomeration council in decisions relating to land use planning in the coming years. From a perspective of sustainable development, this document guides decisions that shape the territory in order to promote compact and greener neighborhoods, increase public and active transportation, support the economic dynamism of the agglomeration and highlight areas of interest.[Consult the interactive map] (https://smvt.maps.arcgis.com/apps/webappviewer/index.html?id=d152aaa85b6f4e9086cecdf10c7456db) of the Planning and Development Plan to visualize the thematic data.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
Flood Protection Works - Appurtenant Structures
Existing flood protection works appurtenances on or near dikes, for example, pump house, floodbox, culvert, gate, gauge, weir, etc. Updated from available Provincial dike survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, appurtenance data based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected appurtenance for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf
ENV Regional Boundaries
The spatial representation for Environment Regions. An Environment Region is an administrative area established by the Ministry and is an administrative area which is used to manage regional activites.
Flood Protection Works - Structural Works
Existing flood protection works (dikes and bank protection) crest alignment in British Columbia. Updated from available Provincial dike crest survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, linework based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected linework for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback