This is the 5 year investment plan for Manitoba Highway and Infrastructure Capital Projects.This dataset will show all the proposed infrastructure projects for the next 5 years. This Feature layer is similar to the "Manitoba Capital Plans Project Status" and will be updated once a year.This dataset contains points showing the locations of the capital projects such as asphalt surface treatment, grading, bituminous rehabilitation, concrete reconstruction, culvert jacking, intersection improvement, structures improvement, traffic signal improvements, and traffic safety improvements. This dataset was created by digitizing high-resolution imagery of Manitoba road network, bridge sites, and culvert locations. The details of the capital projects are available as attributes of the dataset.Fields included (Alias (Field Name): Field description.)Hwy (Hwy): The highway number where the project is located.  Location Description (Location_Description): A detailed description of the project location. Project Distance in km (km): The physical length of the project Project Type (Project_Type): A particular category assigned to the project based on the nature of work. Investment Category : (Investment_Category): Category of future investment for the project. (Ex: Renewal, Economic Development, Connectivity and Innovation, Climate Resiliency)  Municipality Name (MUNI_NAME): The name of the municipality where the project is located. Department Program (Department_Program): The name of the MI department responsible for the project.This dataset is used in Manitoba Infrastructure Projects an interactive map that shows Manitoba infrastructure's new, approved, and continuing capital project locations.

TOLLPOINT _OFFICIAL is one of the important layers for Saskatchewan Upgraded Road Network (SURN) and National Road Network (NRN). The TOLLPOINT _OFFICIAL provides the information of road Toll Points to clients that require accurate, relatively up-to-date and detailed description of Saskatchewan Road Network.TOLLPOINT _OFFICIAL, This layer contains data about a place where a right-of-way is charged to gain access to a motorway, a bridge, etc. TOLLPOINT _OFFICIAL contains all the Toll Point locations in the Saskatchewan. TOLLPOINT _OFFICIAL is an important part of the Saskatchewan road network dataset. Each point geometry " TOLLPOINT" has unique Identifiers (NID). "NID" National Identifier is used to manage the updates between data producer and data users.

Territory of districts, regions, MRC service center, MRC station.Highways and roads treated as a highway for patrol, covered by highway posts and MRC posts.Location of district and regional offices, MRC posts and highway posts.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Highway Planning and Design's 2017 Manitoba Road Network.The 2017 Manitoba Road Network was created by Manitoba Infrastructure --> Highway Engineering--> Highway Planning and Design. The department’s linear referencing system (LRS) uses Control Sections as a linear referencing method (LRM). The LRM is the digital representation of the Highway Network in Manitoba. The features indicate highway number and highway identity. This data was corrected using 1:60,000 digital ortho aerial photography dated from 1991-1998. Linear features have been updated on a yearly basis using GPS data, CAD files and 50cm imagery from 2007-2014, and is considered accurate to two-to-seven metres. Please note that this feature layer primarily contains only the roads that Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility). A newer version of this data is available: Manitoba Road Network 2018. Field List - FIELD NAME (Field Alias (i.e. display name)) in parenthesis)OBJECTID (OBJECTID) - Sequential, unique whole numbers are automatically generated.SHAPE (SHAPE) - A field to hold geometry information. ID (ID) - Unique Identifier generated by Oracle.CS_ID (Control Section ID) - Non unique identifier linking segment to its respective control section.ROAD_NO_SIGNED (Road Number Signed) - The road number. Note though, that in the case of co-routes, the lower highway number appears. This is a text field and differs from ROAD_NO only where there are city routes, for example 1A.ROAD_LOCATION (Road Location) - Access Road locations.DESCRIPTION (Road Description) - A text description of the start and end locations of each segment. CS_KEY (Control Section Key) - An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character).REGION_NO (MI Region) - The Manitoba Infrastructure region the segment is in. Regions 1-5.ROAD_NO (Road Number) - The road number. Note co-routes will have the lesser highway number. SECTION_NO (Section Number) - The control section's section number.START_KM (Start Kilometre (KM)) - The beginning of the Control Section (always zero).END_KM (End Kilometre (KM)) - The number of kilometres to the end of the Control Section.LENGTH_KM (Length Kilometres (KM)) - End Kilometre minus the Start Kilometre. ROAD_TYPE (Road Type) - The road type, i.e. PTHs, PRs, and Access Roads (Earth roads under construction may also be included). ROAD_DIRECTION (Road Direction) - A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided Highway (i.e. against the digitizing direction, and U= an undivided highway.ROAD_IDENTITY (Road Identity) - Road identity i.e. Provincial Road, Earth Road, Access Road and Other Road.NATIONAL_HIGHWAY_CLASS (National Highway Classification) - The national highway classification standard.START_DATE (Start Date) - The date the segment was created in the database. INVENTORY_YEAR (Inventory Year) - The year the road segment was opened to the public. SHAPE_Length (Segment Length) - An automatically generated length field based on geometry.

Highway Planning and Design's 2018 Manitoba Road Network.The 2018 Manitoba Road Network was created by Manitoba Infrastructure, Highway Engineering, Highway Planning and Design (HPD). The department’s linear referencing system (LRS) uses Control Sections as a linear referencing method (LRM). The LRM is the digital representation of the Highway Network in Manitoba. The features indicate highway number and highway identity. This data was corrected using 1:60,000 digital ortho aerial photography dated from 1991-1998. Linear features have been updated on a yearly basis using GPS data, CAD files and 50cm imagery from 2007-2014, and is considered accurate to two-to-seven metres. Please note that this feature layer primarily contains only the roads that Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility).Fields included (Alias (Field Name): Field description.) OBJECTID (OBJECTID): Sequential, unique whole numbers are automatically generated. SHAPE (SHAPE): A field to hold geometry information.  ID (ID): Unique Identifier generated by Oracle. Control Section ID (CS_ID): Non unique identifier linking segment to its respective control section. Road Number Signed (ROAD_NO_SIGNED): The road number. Note though, that in the case of co-routes, the lower highway number appears. This is a text field and differs from ROAD_NO only where there are city routes, for example 1A. Road Location (ROAD_LOCATION): Access Road locations. Road Description (DESCRIPTION): A text description of the start and end locations of each segment.  Control Section Key (CS_KEY): An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character). MI Region (REGION_NO): The Manitoba Infrastructure region the segment is in. Regions 1-5. Road Number (ROAD_NO): The road number. Note co-routes will have the lesser highway number.  Section Number (SECTION_NO): The control section's section number. Start Kilometre (KM) (START_KM): The beginning of the Control Section (always zero). End Kilometre (KM) (END_KM): The number of kilometres to the end of the Control Section. Length Kilometres (KM) (LENGTH_KM): End Kilometre minus the Start Kilometre.  Road Type (ROAD_TYPE): The road type, i.e. PTHs, PRs, and Access Roads (Earth roads under construction may also be included).  Road Direction (ROAD_DIRECTION): A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided Highway (i.e. against the digitizing direction, and U= an undivided highway. Road Identity (ROAD_IDENTITY): Road identity i.e. Provincial Road, Earth Road, Access Road and Other Road. National Highway Classification (NATIONAL_HIGHWAY_CLASS): The national highway classification standard. Start Date (START_DATE): The date the segment was created in the database.  Inventory Year (INVENTORY_YEAR): The year the road segment was opened to the public. 

This is a point shape file representing 2 kilometre incremental distances along each of the 8 NWT highways.  These 2km points do not represent the actual location of 2km highway posts found along the sides of the highways.  The feature class points are placed every 2 kilometres along a highway and represent the distance from a fixed commencement point, the beginning of that highway.

Highway Planning and Design's 2016 Manitoba Road Network.The 2016 Manitoba Road Network was created by Manitoba Infrastructure --> Highway Engineering--> Highway Planning and Design. The department’s linear referencing system (LRS) uses Control Sections as a linear referencing method (LRM). The LRM is the digital representation of the Highway Network in Manitoba. The features indicate highway number and highway identity. This data was corrected using 1:60,000 digital ortho aerial photography dated from 1991-1998. Linear features have been updated on a yearly basis using GPS data, CAD files and 50cm imagery from 2007-2014, and is considered accurate to two-to-seven metres. Please note that this feature layer primarily contains only the roads that Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility). A newer version of this data is available: Manitoba Road Network 2018. Field List - FIELD NAME (Field Alias (i.e. display name)) in parenthesis) OBJECTID (OBJECTID) - Sequential, unique whole numbers are automatically generated. SHAPE (SHAPE) - A field to hold geometry information. ID (ID) - Unique Identifier generated by Oracle. CS_ID (Control Section ID) - Non unique identifier linking segment to its respective control section. ROAD_NO_SIGNED (Road Number Signed) - The road number. Note though, that in the case of co-routes, the lower highway number appears. This is a text field and differs from ROAD_NO only where there are city routes, for example 1A. ROAD_LOCATION (Road Location) - Access Road locations. DESCRIPTION (Road Description) - A text description of the start and end locations of each segment. CS_KEY (Control Section Key) - An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character). REGION_NO (MI Region) - The Manitoba Infrastructure region the segment is in. Regions 1-5. ROAD_NO (Road Number) - The road number. Note co-routes will have the lesser highway number. SECTION_NO (Section Number) - The control section's section number. START_KM (Start Kilometre (KM)) - The beginning of the Control Section (always zero). END_KM (End Kilometre (KM)) - The number of kilometres to the end of the Control Section. LENGTH_KM (Length Kilometres (KM)) - End Kilometre minus the Start Kilometre. ROAD_TYPE (Road Type) - The road type, i.e. PTHs, PRs, and Access Roads (Earth roads under construction may also be included). ROAD_DIRECTION (Road Direction) - A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided Highway (i.e. against the digitizing direction, and U= an undivided highway. ROAD_IDENTITY (Road Identity) - Road identity i.e. Provincial Road, Earth Road, Access Road and Other Road. NATIONAL_HIGHWAY_CLASS (National Highway Classification) - The national highway classification standard. START_DATE (Start Date) - The date the segment was created in the database. INVENTORY_YEAR (Inventory Year) - The year the road segment was opened to the public. SHAPE_Length (Segment Length) - An automatically generated length field based on geometry.

Forest resource roads (FRR) are actively used for accessing forest resources. FRRs are tracked and managed in a road management database. These roads do not represent a complete road network, they should be viewed in conjunction with the Roads -50k - Canvec dataset. Many FRRs are gated with controlled access. There are four categories of roads in the dataset: Forest Resource Roads (act); Forest Resource Access (non-act), Public Access (non-act) and auxiliary roads:- Forest resources road (Act): a road constructed, modified or maintained for the purpose of providing access for forest resources harvesting or management of forest resources that is authorized under subsection 32(1) of the Act, or a road designated as forest resources road under section 73 of the Regulation. These roads were constructed or designated after the Forest Resources Act and Regulation were enacted. - Forest resource access (non-Act): a road constructed, modified or maintained for the purpose of providing access for forest resources harvesting or management of forest resources that is considered a capital investment by the Government of Yukon, Department of Energy, Mines and Resources, Forest Management Branch. These roads were constructed prior to the enactment of the Forest Resources Act. - Public Access (non act): a pre-existing public road. In this road network all Public Access is part of the forest resource access network. - Auxiliary access: a variety of access types that do not conform to the above descriptions and may include: research forest trails, skid trails, heritage trails, trails that access forest resources. Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

To identify the overall reach and configuration of the Capital Pathway, show the location of existing pathways (as of 2020) and proposed pathway segments, and distinguish between discovery routes and feeder links.Capital Pathway Strategic Plan, October 2020 https://ncc-website-2.s3.amazonaws.com/documents/Pathways-BOOK-10-15-2020-EN_Final_Compressed.pdf

An accurate depiction of road structure construction history of the Highway Network in Manitoba.Manitoba Infrastructure, Highway Engineering, Highway Planning and Design (HPD) manages the Highway Inventory System (HIS). This system tracks road structure and construction history of Manitoba's Road Network. Published annually, this layer aids provincial engineers in planning and managing construction projects, both present and future. The department’s linear referencing system (LRS) uses control sections as a linear referencing method (LRM). These control section are further divided into subsections. It is on these subsections that road structure and construction history are tracked in the highway inventory system database.Please note that this feature layer primarily contains only the roads Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. It does not include municipal mile or grid roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility).Fields included (Alias (Field Name): Field description.) OBJECTID (OBJECTID): Sequential, unique whole numbers are automatically generated. SHAPE (SHAPE): A field to hold geometry information. ID (ID): Oracle's unique identifier Control Section ID (CS_ID): Non unique identifier linking segment to its respective control section. For example, a control section may have numerous geometry segments and each will have the same CS_ID. Control Section Key (CS_KEY): An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character). Subsection ID (SS_ID): Control Sections are further divided into Subsections. This is the subsection ID field. MI Region (REGION_NO): The Manitoba Infrastructure region the segment is in Regions 1-5. Road Number (ROAD_NO): The road number. Note co-routes will have the lesser highway number. Section Number (SECTION_NO): The section number from the CS_KEY. Road Type (ROAD_TYPE): H = Highway, E = Earth Road, and O= 'Other" road (such as through a national park because the road is not a responsibility of MI.) Road Direction (ROAD_DIRECTION): A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided highway (i.e. against the digitizing direction, and U= an undivided highway. Start Kilometre (KM) (START_KM): Start KM, is the start of the sub section within a control Section. This is part of the linear referencing method used for dynamic segmentation. End Kilometre (KM) (END_KM): End KM is the end of the sub section within a Control Section. This is part of the linear referencing method used for dynamic segmentation. Length (KM) (LENGTH_KM): End Kilometre minus the Start Kilometre. Subsection Description (SECTION_DESC): A text description of where the subsection starts and ends. Road Type Description (ROAD_TYPE_DESC): An unabbreviated version of Road Type above. Road Direction Description (ROAD_DIRECTION_DESC): An unabbreviated version of Road Direction above. Functional Class (FUNCTIONAL_CLASS): Functional Class: Expressway, Primary Arterial, Secondary Arterial and Collector Divided Status (DIVIDED_STATUS): Highway is divided or undivided. Number of Lanes (LANES): The number of lanes the road has. Median Type (MEDIAN_TYPE): Type of median: Raised Median, Depressed Median, Flush Median, Barrier and No Median. Median Width (m) (MEDIAN_WIDTH): The width of the median, in metres. Row Width (m) (ROW_WIDTH): The total width of the right-of-way in metres. Subgrade Width (m) (SUBGRADE_WIDTH): The width of the earth embankment in metres. Re-grade Year (REGRADE_YEAR): The year the road was last regraded. Re-grade Description (REGRADE_DESCRIPTION): Description of what re-grading was done. Outside Shoulder Type (OUTSIDE_SHLDR_TYPE): Type of outside shoulder: AST, Curbed, Fully Paved, Gravel, No Shoulders and N/A. Outside Shoulder Width (m) (OUTSIDE_SHLDR_WIDTH): The width of the outside shoulder in metres. Outside Paved Width (m) (OUTSIDE_PAVED_WIDTH): The width of the paved surface of the outside shoulder in metres. Inside Shoulder Type (INSIDE_SHLDR_TYPE): Type of inside shoulder: Curbed, Fully Paved, Gravel, No Shoulders and N/A. Inside Shoulder Width (m) (INSIDE_SHLDR_WIDTH): The width of the inside shoulder in metres. Inside Paved Width (m) (INSIDE_PAVED_WIDTH): The width of the paved surface of the inside shoulder in metres. Surface Type (SURFACE_TYPE): The type of surfacing on the road: A Base, AST, Bituminous (Bpm), Bituminous B, Bituminous C, C Base, Concrete, Granular, Reclaimed Asphalt Pavement and Road Mix Surface Width (m) (SURFACE_WIDTH): The surface width is the width of the driving lanes. Surface Depth (mm) (SURFACE_DEPTH): Thickness of the surface layer (mm). Surface Year (SURFACE_YEAR): The year the surface was constructed. Base Layer 1 (BASE_1): 1st subsurface layer. 1 = present, 0 = not present Base Layer 1 Type (BASE_1_TYPE): Material type of 1st subsurface layer of the road structure. Base Layer 1 Depth (mm) (BASE_1_DEPTH): Thickness of 1st subsurface layer of road structure in mm. Base Layer 1 Year (BASE_1_YEAR): Year materials placed or modified for 1st subsurface layer. Base Layer 2 (BASE_2): 2nd subsurface layer. 2 = present, 0 = not present Base Layer 2 Type (BASE_2_TYPE): Material type of 2nd subsurface layer of road structure. Base Layer 2 Depth (mm) (BASE_2_DEPTH): Thickness of 2nd subsurface layer of road structure in mm. Base Layer 2 Year (BASE_2_YEAR): Year materials placed or modified for 2nd subsurface layer. Base Layer 3 (BASE_3): 3rd subsurface layer. 3 = present, 0 = not present Base Layer 3 Type (BASE_3_TYPE): Material type of 3rd subsurface layer of road structure. Base Layer 3 Depth (mm) (BASE_3_DEPTH): Thickness of 3rd subsurface layer of road structure in mm. Base Layer 3 Year (BASE_3_YEAR): Year materials placed or modified for 3rd subsurface layer. Base Layer 4 (BASE_4): 4th subsurface layer. 4 = present, 0 = not present Base Layer 4 Type (BASE_4_TYPE): Material type of 4th subsurface layer of road structure. Base Layer 4 Depth (mm) (BASE_4_DEPTH): Thickness of 4th subsurface layer of road structure in mm. Base Layer 4 Year (BASE_4_YEAR): Year materials placed or modified for 4th subsurface layer. Base Layer 5 (BASE_5): 5th subsurface layer. 5 = present, 0 = not present Base Layer 5 Type (BASE_5_TYPE): Material type of 5th subsurface layer of road structure. Base Layer 5 Depth (mm) (BASE_5_DEPTH): Thickness of 5th subsurface layer of road structure in mm. Base Layer 5 Year (BASE_5_YEAR): Year materials placed or modified for 5th subsurface layer. Base Layer 6 (BASE_6): 6th subsurface layer. 6 = present, 0 = not present Base Layer 6 Type (BASE_6_TYPE): Material type of 6th subsurface layer of road structure. Base Layer 6 Depth (mm) (BASE_6_DEPTH): Thickness of 6th subsurface layer of road structure in mm. Base Layer 6 Year (BASE_6_YEAR): Year materials placed or modified for 6th subsurface layer. Base Layer 7 (BASE_7): 7th subsurface layer. 7 = present, 0 = not present Base Layer 7 Type (BASE_7_TYPE): Material type of 7th subsurface layer of road structure. Base Layer 7 Depth (mm) (BASE_7_DEPTH): Thickness of 7th subsurface layer of road structure in mm. Base Layer 7 Year (BASE_7_YEAR): Year materials placed or modified for 7th subsurface layer. Terrain Type (TERRAIN_TYPE): General terrain conditions: Flat, Rolling and Rugged. Construction Status (CONSTRUCTION_STATUS): Construction completed or carried over. Updated Date (UPDATED_YYYYMMDD): Date the record was updated.