These datasets provide information pertaining to sediment grain size, porosity, organic content, total carbon and nitrogen concentrations, trace element concentrations, chlorophyll and phaeopigment concentrations, and meiofauna and macrofaunal abundance in Simoom Sound between November, 2000, and February, 2001. Data formatting of files were performed by Meagan Mak.Sutherland et al (2023) covers the benthic component of a broader project investigating potential modification of marine ecosystems by shrimp trawling and trapping on the central coast of British Columbia. Sediment and infaunal samples were collected before and after fishing with commercial fishing gear consisting of otter-trawl, beam-trawl, and trap-lines. Simoom Sound was sampled in November 2000 and February 2001. Tabulated data of sediment characteristics that include sediment grain size, porosity, carbon and nitrogen content, trace-element, and chlorophyll concentrations are presented in this report. In addition, the infaunal data are comprised of both macrofaunal and meiofaunal communities.

* This dataset is updated on a daily basis. The ‘Record Modified’ date refers to the last metadata update.This dataset contains the extent of mineral claims held in Nunavut. A mineral claim is an area of Crown Land that is selected using the Nunavut Map Selection system by an individual or mineral exploration company that holds a valid licence to prospect. This grants the individual or mineral exploration company the mineral rights to the recorded area as provided for under the Nunavut Mining Regulations, SOR/2014-69. If the holder of a mineral claim wishes to produce minerals from the claim, or to hold it for more than thirty years, the holder must apply for a lease of the claim. This digital coverage provides a record and tracking mechanism for mining exploration in Nunavut.For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100036000/1547749889500. Note: This is one of the four (4) datasets that describe mineral tenure in Nunavut. It includes mineral claims, mining leases, prospecting permits as well as coal exploration licences.

An Ungulate Winter Range (UWR) is defined as an area that contains habitat that is necessary to meet the winter habitat requirements of an ungulate species. UWRs are based on current understanding of ungulate habitat requirements in winter, as interpreted by FLNR regional staff from current scientific and management literature, local knowledge, and other expertise from the region. UWRs within this set of data are currently in the review and consultation stage of the area designation process. As UWRs are designated they will be moved into the [Approved Ungulate Winter Range](http://catalogue.data.gov.bc.ca/dataset/ungulate-winter-range) dataset.

Level curves with an equidistance of 1 m derived from a lidar survey conducted in 2024.attributes:ID - Unique IDSubtype - Master (1) or secondary (2) level curve SCORE - Elevation value (m) The High Resolution Digital Elevation Model (m) product The High Resolution Digital Elevation Model (HRDM) product is available on the Open Government website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This database aggregates basic information on orphaned and abandoned mine sites from participating Canadian jurisdictions, including their name, location, jurisdiciton, and the commodity that was mined. It was originally created in 2012 through the National Orphaned/Abandoned Mines Initiative and has undergone several updates since that time. Data on sites in each jurisdiction is owned and maintained by that jurisdiction. The database includes links to the corresponding records in that jursidiction. While the database includes common informaiton about all sites, there may be discrepancies in the types of data provided about sites in different jurisdictions and data from some jurisdictions may be updated more frequently than others.

This map service provides access to most of the Resource Map datasets shown on the GeoAtlas application.**Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule. This map service is used by the GeoATLAS web application, sub-section Resource Map in the Mineral Exploration theme. It includes Base Metals Potential, Coal Potential, Gold Potential, Helium Potential, Bitumen (Oil Sands) Potential, Lithium Potential, Potash and Salt Resource Potential, Rare Earth Elements Potential and Uranium Potential schema in Production Data Warehouse. Note: Oil and Gas pools are found in the /Petroleum service.

The Air Quality Health Index (AQHI) is a scale designed to help quantify the quality of the air in a certain region on a scale from 1 to 10. When the amount of air pollution is very high, the number is reported as 10+. It also includes a category that describes the health risk associated with the index reading (e.g. Low, Moderate, High, or Very High Health Risk). The AQHI is calculated based on the relative risks of a combination of common air pollutants that are known to harm human health, including ground-level ozone, particulate matter, and nitrogen dioxide. The AQHI formulation captures only the short term or acute health risk (exposure of hour or days at a maximum). The formulation of the AQHI may change over time to reflect new understanding associated with air pollution health effects. The AQHI is calculated from data observed in real time, without being verified (quality control).

GeoAI are buildings, hydrography, forests, and roads automatically extracted using Deep Learning models applied to a source dataset, typically aerial or satellite images. The primary aim of GeoAI is to increase Canada's availability of high-resolution foundational geospatial data for both spatial and temporal coverage.‌The infrastructure and expertise put in place by NRCan enables a rapid, efficient, and scalable data creation process through the use of leading-edge technology and Artificial Intelligence models. Published datasets for a given source can be revisited at a later date as more accurate models are developed and put into production. For now, only static files are available, but as the series develops, new products and services will be added.

This point dataset represents both applications for a Mines Act permit and issued authorizations for mining activities proposed in the application. Applications for regional Mines Act permits are known as Notice of Work (NoW) applications. Regional mine permits are issued for mineral and coal exploration activities, sand and gravel production, quarry production, and placer mining. Major mine permits are issued for producing mineral and coal mines. Permits are issued by the chief permitting officer under section 10 of the Mines Act and administered by the ministry. Regional mines include: * Exploration — mineral, coal, rock quarry, industrial mineral or dimension stone * Sand and gravel — aggregate, rock or natural substances used for construction purposes * Placer   Most exploration and development activities require a permit under the Mines Act. A decision marks the end of the permitting process for a NoW application. The decision can either be to reject the application or to authorize the mining activities proposed in the NoW. * For new NoW authorizations, a Mines Act permit is issued * For an existing open Mines Act permit, the newly authorized mining activities are amended to the existing permit and the permit is re-issued   **NOTE:** Administrative amendments to a NoW are not captured in this dataset. We are currently working to include this addition for a more complete view of the data. For proponents, please log into https://minespace.gov.bc.ca/ to confirm any authorizations on your permits. The ministry is transitioning from point data to polygonal data for permits and authorizations. The polygon dataset is added to when data becomes available. Users should use both the point dataset and the polygon dataset in combination. Polygon representation of permits with authorizations are referred to as Notice of Work (NoW) – Permitted Mine Areas – Regional Mine - Public https://catalogue.data.gov.bc.ca/dataset/c728435d-410e-42f9-81d5-95978c90e44a The downloaded product from the BCGW is a complete set of all the NoW public records. In addition to the records that contain lat/long references to be mapped spatially, this includes records that do not have NoW lat/long or mine lat/long coordinates to spatialize. These records are listed in a CSV file (HSP_NOTICE_OF_WORK_PA_POINT_SV_NullGeom). Notice of Work categories include: Notice of Work application type, Notice of Work application status. **Notice of Work application type** Field: NOW_APPLICATION_TYPE_DESC (NW_APPTYPD) * Coal * Mineral * Placer Operations * Quarry – Construction Aggregate * Quarry – Industrial Mineral * Sand and Gravel   **Notice of Work application status** Field: NOW_APPLICATION_STATUS_DESC (NW_APPSTAD) * Approved – mining activities in the NoW application have been authorized * Client Delayed – Client needs to provide additional information or reclamation security * Government Action Required – Government needs to action; this status is triggered once a client has provided the requested information and client delay is no longer valid * Referred – Includes referral to agencies and stakeholders, and consultation with First Nations * Rejected – An application is rejected. Either the application standards are not met or requested documentation or security was not provided * Received – The NoW application has been sent from virtual FrontCounterBC to the ministry database * No Permit Required – Category when an inspector reviews the application and non-mechanized disturbance does not require a permit, for example an IP survey * Referral Complete – Referral and consultation is complete. The government needs to action the next steps * Withdrawn – Client requested the application to be withdrawn * Pending verification – Category for records needing review and verification. Typically, these are historical NoW applications with approvals. Manual review is required * NULL value – missing status and application type   **For the public view, please be aware that the ministry:** * Only shows mine commodities of gold or jade/nephrite in the MINE_COMMODITY_DESC (MN_COMD) field. All other commodity values remain NULL (empty)

Geochronology is a discipline of geoscience which measures the age of earth materials and provides the temporal framework in which other geoscience data can be interpreted in the context of Earth history. This knowledge helps to answer questions such as when did a volcano last erupt, what is the rate of crustal uplift in a specific area, are rocks at one gold prospect the same age as those at another.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)