This dataset includes daily averages of solar irradiance on tilted surfaces for all of Canada based on the period of 1998 - 2022.Daily averages of solar irradiance are displayed on both a monthly and annual basis for ten different tilt and tracking methods relative to the ground (horizontal) and latitude of the location. The daily averages were derived from multi-year satellite-derived solar resource datasets at an hourly temporal resolution and gridded geospatial resolution of approximately 10 km by 10 km.The data can be used to further assess the potential of solar energy technologies in Canada, including solar photovoltaics (PV) for electricity and solar thermal for domestic hot water and space heating. Maps of solar resource potential in Canada – Data Format The data stored in these files includes the daily-average insolation on tilted surfaces in units of kW·hr/m² for a given period. Each band represents period, numbered in order: band 1 = Annual, band 2 = January, band 3 = February, ..., band 13 = December.The period of averaging is the year 1998-2022, inclusive.Four fixed tilted surfaces of 0° (horizontal), 30°, 60°, and 90° (vertical) relative to the horizontal plane:- fixed tilted surfaces of 0° (vertical) relative to the horizontal plane (H+ 00 S+00)- fixed tilted surfaces of 30° (vertical) relative to the horizontal plane (H+ 30 S+00)- fixed tilted surfaces of 60° (vertical) relative to the horizontal plane (H+ 60 S+00)- fixed tilted surfaces of 90° (vertical) relative to the horizontal plan (H+ 90 S+00)Three fixed tilted surfaces of 0°, +15°, and -15°, relative to the local latitude:- fixed tilted surfaces of 0° relative to the local latitude (L+00 S+00)- fixed tilted surfaces of +15°, relative to the local latitude (L+00 S+00)- fixed tilted surfaces of -15°, relative to the local latitude (L+00 S+00)- A two-axis tracking surface that follows the sun throughout the day (T+00 T+00)- A single-axis tracking surface with the axis aligned north-south, tracking the sun east to west (A+00_S+90)- A single-axis tracking surface with the axis aligned east-west, tracking the sun's elevation (A+00_S+00)

The ASTER instrument that was launched onboard NASA’s Terra spacecraft in December 1999 has an along-track stereoscopic capability using two telescopes in its near infrared spectral band to acquire data from nadir and backward views. Over 1.2 million scenes (level-1A products) acquired between March 2000 and August 2008 were used to generate the ASTER Global DEM (ASTGTM) collection.  For more information on the ASTER Global DEM, please see the metadata link.

The ASTER instrument that was launched onboard NASA’s Terra spacecraft in December 1999 has an along-track stereoscopic capability using two telescopes in its near infrared spectral band to acquire data from nadir and backward views. Over 1.2 million scenes (level-1A products) acquired between March 2000 and August 2008 were used to generate the ASTER Global DEM (ASTGTM) collection.  For more information, please see the metadata link above.

The Modern treaties (formerly known as the Post-1975 treaties) dataset contains geographic boundaries as well as basic attribute data representing signed agreements that were negotiated between Indigenous groups, the Government of Canada, and provincial and territorial governments after 1975. These boundaries represent the areas of Canada where Indigenous land rights and title have not been addressed by treaty or through other legal means. These boundaries represent the final result of a negotiated First Nation’s claimed area. These boundaries are usually not surveyed but help to delineate the geographic extent of the rights of Indigenous beneficiaries defined within the agreement. The Modern treaties dataset includes: 1) Overall Treaty Area (OTA) which is the broad area to which the agreement applies, often composed of the sum of the specific geographies defined within the treaty. 2) Treaty Settlement Lands that is wholly Indigenous-owned and forms part of the “land and cash” settlements that are integral to the treaty. This category belongs to the Department of Natural Resources Canada and can be found on the Open data website as ‘‘Aboriginal Lands’’ classified as ‘‘Land Claim’’. 3) Treaty-Specified Rights Areas which category pertains to areas (lands or waters) where specific rights, activities or responsibilities apply pursuant to the treaty. 4) Other Treaty-related Geography is the catch-all category for any remaining geographies that do not fit within the aforementioned categories but do form part of the OTA, such as lands or marine areas designated for conservation or for specific projects.For more information about Modern treaties, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100028574/1529354437231#chp4. The Modern treaties dataset is one of multiple datasets representing treaties and agreements between the Crown and Indigenous peoples. The Crown-Indigenous treaties and agreements geospatial datasets represent the geographic boundaries of the solemn agreements between the Crown and Indigenous peoples that set out promises, obligations and benefits for parties. The following datasets are also available: 1) The Historic treaties (formerly known as the Pre-1975 treaties) dataset, which represents most signed treaties that were negotiated between Indigenous peoples and the Crown between 1725 and 1929.2) The Indigenous agreements dataset, which represents established protocols in place for consultation processes, self-government agreements, and other signed agreements between Indigenous groups and the Crown which do not fall into the aforementioned categories.The Modern treaties dataset is Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) and Indigenous Services Canada (ISC)’s primary source for Modern treaties geographic boundaries on maps.This dataset can also be viewed in the Aboriginal and Treaty Rights Information System (ATRIS). This web-based system provides access to information to inform governments, industry and other interested parties in determining their consultation obligations and in carrying out their consultation research.For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100014686/1609421785838.

This is a spatial layer showing Ministry of Forests Radio Communication Sites. Communication Sites are physical land locations containing structures and equipment which provide two or one-way voice and or data wireless communications to field staff or for operational activities

The spatial representation for a Pulpwood Agreement, which is a 25 year term agreement, replaceable every ten years, that allows the holder of a wood-fibre processing facility to harvest Crown pulp timber if sufficient quantities of raw material are not available to the holder from other sources. Covers a large area in one or more Timber Supply Areas or TFLs.

The spatial representation for current Timber Supply Areas (TSA). A Timber Supply Area is a designated area established by the Ministry in order to practice sound, integrated, resource management principles to improve the allowable annual cuts. TSAs were originally defined by an established pattern of wood flow from management units to the primary timber-using industries. They are the primary unit for allowable annual cut (AAC) determination.

The Treaty Boundary dataset is comprised of all the polygons that represent the historical treaty lands of Canada negotiated by First Nations over the years through treaty-making between 1867 - 1999. The approximate boundaries illustrate the traditional territories described in First Nations Statements of Intent to negotiate treaties which have been submitted to, and accepted.

Orders in Council (OIC) are regulations or legislative orders in relation to and authorized by an existing Act. This table identifies Yukon lands withdrawn from disposal, usually by Territorial Order in Council. In Corporate Spatial Warehouse (CSW) data is split out into spatial views by Act under which orders are authorized. The tables are comprehensive and include both active and expired orders. Spatial views show only the active data.In this table and spatial views, Regulations by Order in Council (OIC) are spatially represented to provide clarity regarding Yukon lands withdrawn from disposal. Spatial data is viewed by the Act under which the order is authorized. Not all orders are for withdrawal, different levels of withdrawal are common and not detailed in GIS attributes. It is important to read OIC documents for specific details (https://legislation.yukon.ca/legislation/page_a.html).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps). Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Innu Audio Index is an extract from the Canadian Geographical Names Data Base (CGNDB) of geographical names with associated audio. The shared audio with the Geographical Names Board of Canada (GNBC) is the intellectual property of the Innu Nation. The points represent official geographical names in Innu-aimun, the language of the Innu Nation. The CGNDB is the authoritative national database of Canada's geographical names. It contains geographical names and their attributes that have been approved by the GNBC, the national coordinating body responsible for standards and policies on place names.The GNBC is working to increase awareness of existing Indigenous place names and help promote the revitalization of Indigenous cultures and languages. The GNBC does not warrant or guarantee that the information is accurate, complete or current at all times. For more information, to report data errors, or to suggest improvements, please contact the GNBC Secretariat at Natural Resources Canada with questions or for more information.