The data represents an assessment of biodiversity risk for the agricultural area of Alberta in 2002. Biodiversity risk refers to the loss of biological diversity, or the variety of plant and animal life in agricultural landscapes. This map, created in ArcGIS, tries to show where biodiversity could be threatened, such as in areas with significant habitat that coincide with areas of greater agricultural economic activity. Biodiversity is believed to affect the overall health of the environment.

As part of the Musquash Marine Protected Area (MPA) Monitoring Plan, this project was implemented to establish a baseline for infaunal biodiversity for this area. Data collection began in 2010 and contributed monitoring information for productivity, biodiversity, and habitat indicators within the Musquash Harbour. A 1500 cubic centimetre ponar benthic grab was deployed at 30 random stations distributed over three strata (channel, intertidal and subtidal). Samples were to be collected up to three times per year to account for seasonality and annual variation. Once collected the benthic samples were analyzed for changes in grain size, carbon content (Loss on ignition), species abundance/diversity and biomass.Cite this data as: Cooper, J.A., and Blanchard, M. Musquash Benthic Infauna. Published in September 2023. Coastal Ecosystem Science Division, Fisheries and Oceans Canada, St. Andrews, NB.For additional information please see:Cooper, A., Abbott, M., Allard, K., Chang,, B., Courtenay, S., Doherty, P., Greenlaw, M., Ipsen, E., Koropatnick, T., Law, B., Losier, R., Martin, J., Methven, D., and Page, F. 2014. Musquash Estuary Marine Protected Area (MPA): Data Assessment. DFO Can. Sci. Advis. Sec. Res. Doc. 2014/001. v + 57 p.Cooper, J.A., Jones, O. and Blanchard, M. 2023. Review of Baseline Monitoring within the Musquash Estuary Marine Protected Area. DFO Can. Sci. Advis. Sec. Res. Doc. 2023/028. viii + 56 p.Oceans and Coastal Management Division (OCMD). 2015. Musquash Estuary Marine Protected Area Ecosystem Monitoring Plan (2014-2019). Can. Manuscr. Rep. Fish Aquat. Sci. 3077: v+17 pp.DFO. 2022. 2021 Review of Musquash Marine Protected Area Monitoring. DFO Can. Sci. Advis. Sec. Sci. Advis. Rep. 2022/016.

Fisheries and Oceans Canada (DFO) selected the Manicouagan Peninsula area as a site of interest for the possible establishment of a Marine Protected Area (MPA) in 1998. With this in mind, DFO conducted surveys to assess benthic biodiversity between 2006 and 2008. During the various campaigns, more than a hundred stations were sampled using various tools to target epibenthic and endobenthic species. Various tools were used during the three years of sampling, including an SM (Smith-McIntyre) grab with an area of 0.1 m² and a height of 20 cm, an IKU-type grab with a surface area of 1.5 m² and a height of 50 cm, and a hydraulic dredge measuring 1.36 m wide and 0.66 m high with a net mesh size of 2.3 cm. As the dredge clogged fairly quickly, small organisms were collected in abundance. In 2006 and 2007, a camera mounted on a sled pulled by a boat along transects of varying lengths depending on the sampling campaign collected images (3,008 x 2,000 pixels) every 10 seconds, representing a seabed area of 40 x 40 cm.The data are presented in Darwin Core format in the file “donnees_manicouagan_data” The available data include taxonomic identifications of samples (individuals collected or identified in images) as well as metadata related to stations, including sampling date, depth, and geographic coordinates. Please note that the depths are for informational purposes only, since the bathymetry is very steep in this region.Further details on sampling can be found in the following report: Provencher, L et Nozères, C. 2011. Protocole de suivi des communautés benthiques de la zone de protection marine Manicouagan. Secr. can. de consult. sci. du MPO. Doc. de rech. 2011/051. iv +25 p. https://waves-vagues.dfo-mpo.gc.ca/library-bibliotheque/344357.pdf

Species characterization by environmental DNA (eDNA) is a method that allows the use of DNA released into the environment by organisms from various sources (secretions, faeces, gametes, tissues, etc.). It is a complementary tool to standard sampling methods for the identification of biodiversity. This project provides a list of invertebrates species whose DNA has been detected in water samples collected at 2018 using the marker COI.The surveys were carried out in the summer of 2018 from August 11 to 14, between Forestville and Godbout (Haute-Côte-Nord). Sampling was carried out between 9-52 meters depth in 40 stations with one sample par station. Two liters of water were filtered through a 1.2 µm fiberglass filter. DNA extractions were performed with the DNeasy Blood and Tissue extraction kit (Qiagen). Negative field, extraction and PCR controls were added at the different stages of the protocol. Libraries at the COI locus were prepared by Genome Quebec and sequenced on an Illumina MiSeq PE250 system. The bioinformatics analysis of the sequences obtained was carried out using an in-house analysis pipeline as reported in Bourret et al. 2022. A first step made it possible to obtain a molecular operational taxonomic unit table (MOTU) using the cutadapt software for the removal of the adapters and the DADA2 R package for the filtration, fusion, chimera removal and data compilation. The MOTUs table was subsequently corrected by taking into account the negative controls, where the number of observations in the latter was removed from the linked samples. Singleton MOTUs have also been removed. Finally, the taxonomic assignments were carried out on the MOTUs using the IDTAXA classifier (present in the DECIPHIER R package) using a training set trained on the COI reference bank for Golf St-Laurent (GSL-rl v1.0, https://github.com/GenomicsMLI-DFO/MLI_GSL-rl) and a threshold of 40. Detections with an “Unreliable due to gaps” category were reported at the genus level only.The file provided includes generic activity information, including site, station name, date, marker type, assignment types used for taxa identification, and a list of taxa or species. The list of taxa has been verified by a biodiversity expert from the Maurice-Lamontagne Institute.This project was funded by Fisheries and Oceans Canada's Coastal Environmental Baseline Data Program under the Oceans Protection Plan. This initiative aims to acquire baseline environmental data that contributes to the characterization of significant coastal areas and supports evidence-based assessments and management decisions to preserve marine ecosystems.Data are also available on SLGO platform : https://doi.org/10.26071/ogsl-cd4c205b-f63b

A research survey on Stimpson's surfclam (Mactromeris polynyma) was conducted from June 15 to June 26 2017 in the Estuary of the St. Lawrence River on the Forestville deposit (Fishing Area 1A). The primary objective of this survey was to investigate the spatial distribution of pre-commercial (< 80 mm) and commercial (≥ 80 mm) sizes of Stimpson's surfclams as well as to assess the abundance and diversity of benthic species associated with the sandy habitat of the Stimpson's surfclam. Only benthic species data associated with Stimpson's surfclam habitat are presented in this dataset.Data were collected according to a systematic sampling design consisting of 77 stations, between 7 and 45 m depth. Stations were spaced 200 m apart and dispersed along a total of 18 transects perpendicular to the bathymetry. Transects were parallel and spaced 500 m apart. Specimens were collected using a hydraulic dredge of the "New England" type with a total length of 2.29 meters and a total width of 1.68 meters, of which 1.35 meters was knife width. The dredge was lined with a 19 millimeter mesh Vexar™ to harvest small individuals. The hauls were made at a speed of 0.2-0.3 knots for a duration of 2 to 3 minutes. Start and end positions were recorded to calculate the distance traveled at each tow using the geosphere library in R. The average tow distance was approximately 25 m. The area covered at each stroke was the product of the width of the dredge blade and the distance.The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic event information, including date and location. The "additional_information_event_and_occurrence" file includes sample size, sampling protocol and sampling effort, among others. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. For abundance and biomass estimates, contact Virginie Roy (virginie.roy@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. Special cases were noted in "identificationRemarks" and selected specimens were confirmed using field photos. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.

Species characterization by environmental DNA (eDNA) is a method that allows the use of DNA released into the environment by organisms from various sources (secretions, faeces, gametes, tissues, etc.). It is a complementary tool to standard sampling methods for the identification of biodiversity. This project provides a list of fish and marine mammal species whose DNA has been detected in water samples collected between 2019 and 2021 using the mitochondrial marker MiFish (12S).The surveys were carried out in the summer of 2019 (July 14-18) and (July 30 - August 5), in the fall of 2020 (October 27-28) and in the summer-fall of 2021 (May 31 - June 3 ) and (August 24-25) between Forestville and Godbout (Haute-Côte-Nord). Sampling was carried out between 1-50 meters depth in 91 stations, with 1 to 3 replicates per station. Two liters of water were filtered through a 1.2 µm fiberglass filter. DNA extractions were performed with the DNeasy Blood and Tissues or PowerWater extraction kit (Qiagen). Negative field, extraction and PCR controls were added at the different stages of the protocol. The libraries were prepared either by Génome Québec (2019, 2020) or by the Genomics Laboratory of the Maurice-Lamontagne Institute (2021), then sequenced on a NovaSeq 4000 PE250 system by Génome Québec. The bioinformatics analysis of the sequences obtained was carried out using an analysis pipeline developed in the genomics laboratory. A first step made it possible to obtain a table of molecular operational taxonomic units (MOTU) using the cutadapt software for the removal of the adapters and the R package DADA2 for the filtration, the fusion, removal of chimeras and compilation of data. The MOTUs table was then corrected using the R package metabaR to eliminate the tag-jumping and take contaminants into consideration. Samples showing a strong presence of contaminating MOTUs were removed from the dataset. The MOTUs were also filtered to remove all remaining adapter sequences and also retain only those of the expected size (around 170 bp). Finally, taxonomic assignments were made on the MOTUs using the BLAST+ program and the NCBI-nt database. Taxonomic levels (species, genus or family) were assigned using a best match method (Top hit), with a threshold of 95%. Only assignments at the level of fish and marine mammals were considered, and the taxa detected were compared to a list of regional species, and corrected if necessary. The species detections of the different replicas have been combined.The file provided includes generic activity information, including site, station name, date, marker type, assignment types used for taxa identification, and a list of taxa or species. The list of taxa has been verified by a biodiversity expert from the Maurice-Lamontagne Institute.This project was funded by Fisheries and Oceans Canada's Coastal Environmental Baseline Data Program under the Oceans Protection Plan. This initiative aims to acquire baseline environmental data that contributes to the characterization of significant coastal areas and supports evidence-based assessments and management decisions to preserve marine ecosystems.Data were also published on SLGO platform : https://doi.org/10.26071/ogsl-2239bca5-c24a

The Marine Biodiversity Observation Network Pole to Pole (MBON P2P) effort seeks to develop a framework for the collection, use and sharing of marine biodiversity data in a coordinated, standardized manner leveraging on existing infrastructure managed by the Global Ocean Observing System (GOOS; IOC-UNESCO), the GEO Biodiversity Observation Network (GEO BON), and the Ocean Biogeographic Information System (OBIS). The MBON Pole to Pole aims to become a key resource for decision-making and management of living resource across countries in the Americas for reporting requirements under the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES), Aichi Targets of the Convention of Biological Diversity (CBD), and the UN 2030 Agenda for Sustainable Development Goals (SDGs).This collection corresponds to the species registered on sandy beaches of the Musquash Harbour, Mispec Bay, and New River Beach, New Brunswick, Canada, using the MBON P2P sampling protocol for sandy beaches, with funding from the Government of Canada's Coastal Environmental Baseline Program.Citation: Reinhart B, Jonah L (2025). MBON POLE TO POLE: SANDY BEACH BIODIVERSITY OF SOUTHWEST NEW BRUNSWICK, CANADA. Version 1.7. Caribbean OBIS Node. Samplingevent dataset. https://ipt.iobis.org/mbon/resource?r=sandybeachesbayoffundynb&v=1.7

Since 1988, the governments of Canada and Quebec have been working together to conserve, restore, protect and develop the St. Lawrence River under the St. Lawrence Action Plan (SLAP). One of the projects identified under the theme of biodiversity conservation is the development of an integrated plan for the conservation of the natural environments and biodiversity of the St. Lawrence River.The identification of priority sites for conservation has been the first step of this planning exercise. Conservation planning of natural environments requires a reliable, accurate and up-to-date image of the spatial distribution of ecosystems in the study area. In order to produce an Atlas of Priority Sites for Conservation in the St. Lawrence Lowlands, an updated cartography of the land cover of this vast territory was undertaken.This project required obtaining reliable information on the natural environments of the St. Lawrence Lowlands. Although several land cover mapping projects have been conducted for specific types of habitats, it was particularly important to obtain a homogeneous product that would cover the entire territory and that would provide the most detailed information on its various thematic components: agricultural, aquatic, human-modified and forest environments, wetlands as well as old fields and bare ground. The methodology used to produce the land cover mapping of the St. Lawrence Lowlands thus relied mainly on combining and enhancing the best existing products for each theme. This project was made in collaboration with MDDELCC as part of the St. Lawrence Action Plan (SLAP).

This 'Current' spatial data layer is publicly accessible, contains the most current Non-Legal Old Growth Management Area (OGMA) polygons and excludes any sensitive information. This data represents spatially defined areas of old growth forest that are identified during landscape unit planning or an operational planning process. Forest licensees are not required to follow direction provided by non-legal OGMAs when preparing FSPs, and may choose to manage required old growth biodiversity targets in other ways. OGMAs, in combination with other areas where forestry development is prevented or constrained, are used to achieve biodiversity targets. Please see the Additional Information and Object Description Comments below.

The Marine Biodiversity Observation Network Pole to Pole (MBON P2P) effort seeks to develop a framework for the collection, use and sharing of marine biodiversity data in a coordinated, standardized manner leveraging on existing infrastructure managed by the Global Ocean Observing System (GOOS; IOC-UNESCO), the GEO Biodiversity Observation Network (GEO BON), and the Ocean Biogeographic Information System (OBIS). The MBON Pole to Pole aims to become a key resource for decision-making and management of living resource across countries in the Americas for reporting requirements under the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES), Aichi Targets of the Convention of Biological Diversity (CBD), and the UN 2030 Agenda for Sustainable Development Goals (SDGs).This collection corresponds to the species registered on rocky shores of the Musquash Harbour, Passamaquoddy Bay and Mispec Bay, New Brunswick, Canada, using the MBON P2P sampling protocol for rocky shores, with funding from the Government of Canada's Coastal Environmental Baseline Program.Citation: Reinhart B, Cooper A, Nason R, Jonah L (2025). MBON POLE TO POLE: ROCKY SHORE BIODIVERSITY OF MUSQUASH HARBOUR, PASSAMAQUODDY BAY AND MISPEC BAY. Version 1.7. Caribbean OBIS Node. Samplingevent dataset. https://ipt.iobis.org/mbon/resource?r=rockyshoresbayoffundynb&v=1.7