Forest Total Aboveground Biomass 2015Total aboveground biomass. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Individual tree total aboveground biomass is calculated using species-specific equations. In the measured ground plots, aboveground biomass per hectare is calculated by summing the values of all trees within a plot and dividing by the area of the plot. Aboveground biomass may be separated into various biomass components (e.g. stem, bark, branches, foliage) (units = t/ha). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

Under the Regulation Respecting the Mandatory Reporting of Certain Contaminant Emissions into the Atmosphere (RDOECA), the Ministry of the Environment, the Fight against Climate Change, Wildlife and Parks collects data on greenhouse gases (GHGs) emitted by Quebec businesses in particular. Thus, any person or municipality operating an establishment that emits GHGs into the atmosphere in a quantity equal to or greater than 10,000 metric tons in CO2 equivalent (t eq. CO2) is required to report its emissions no later than June 1 of each year.The data is presented in separate files:* Total biogenic and CO2 emissions per establishment;* Emissions per establishment and per greenhouse gas and per establishment.Total emissions files include the total quantity of GHGs, the total quantity of GHGs excluding CO2 from biomass, the quantity of CO2 from the combustion of biomass, and the quantity of CO2 from other uses of biomass (for example fermentation).The emission files by establishment and by greenhouse gas include the quantity emitted of each of the GHGs in metric tons and t eq. CO2. Note that CO2 emissions include those from biomass.The data presented in this dataset includes emissions from mandatory and voluntary reporting.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This dataset provides wall-to-wall maps of forest structure across Canada's 650 million hectare forested ecosystems for the year 2022, generated at a spatial resolution of 30 m. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Structure estimates include key attributes such as canopy height, canopy cover, and aboveground biomass, derived using a combination of airborne lidar and Landsat-based spectral composites. Structure models were trained using the - lidar-plot framework - (Wulder et al. 2012), which integrates co-located airborne lidar data and ground plot measurements with Landsat time-series composites (Hermosilla et al. 2016). A Nearest Neighbour imputation approach was applied to estimate structural attributes across the full extent of Canada's forested area. These nationally consistent products are intended to support strategic-level forest monitoring and assessment and are not designed for operational forest management.For further details on the methods, accuracy assessment, and source data, see Matasci et al. (2018).Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment, 216, 697-714. https://doi.org/10.1016/j.rse.2018.07.024 (Matasci et al. 2018)

Canada's National Forest Inventory (NFI) sampling program is designed to support reporting on forests at the national scale. On the other hand, continuous maps of forest attributes are required to support strategic analyses of regional policy and management issues. We have therefore produced maps covering 4.03 × 106 km2 of inventoried forest area for the 2001 base year using standardised observations from the NFI photo plots (PP) as reference data. We used the k nearest neighbours (kNN) method with 26 geospatial data layers including MODIS spectral data and climatic and topographic variables to produce maps of 127 forest attributes at a 250 × 250 m resolution. The stand-level attributes include land cover, structure, and tree species relative abundance. In this article, we report only on total live aboveground tree biomass, with all other attributes covered in the supplementary data (http://nrcresearchpress.com/doi/suppl/10.1139/cjfr-2013-0401). In general, deviations in predicted pixel-level values from those in a PP validation set are greater in mountainous regions and in areas with either low biomass or sparse PP sampling. Predicted pixel-level values are overestimated at small observed values and underestimated at large ones. Accuracy measures are improved through the spatial aggregation of pixels to 1 km2 and beyond. Overall, these new products provide unique baseline information for strategic-level analyses of forests (https://nfi.nfis.org)Collection:- **[Canada's National Forest Inventory (NFI) 2006](https://open.canada.ca/data/en/dataset/e2fadaeb-3106-4111-9d1c-f9791d83fbf4)**

This polygon dataset represents Community Interest Zones (CIZ) reserved on behalf of 21 Entitlement First Nations as per the Treaty Land Entitlement Framework Agreement and the Notice Area for the Peguis Treaty Entitlement Agreement.The Community Interest Zone (CIZ) dataset illustrates consultation areas reserved on behalf of 21 Entitlement First Nations represented by the Treaty Land Entitlement Committee as contained within the Treaty Land Entitlement Framework Agreement signed May 29th 1997, and the Peguis Treaty Entitlement Agreement signed April 29, 2008. The CIZ boundary is based on the 1:500,000 Province of Manitoba base map and a 30-km radius drawn from a specific existing reserve boundary. The boundary of the Peguis Notice Area was included in the Peguis Treaty Entitlement Agreement and has been digitized using a heads-up digitizing method. The areas have been squared off to include the whole section where only part of a section is intersected by the 30-km radius. For more information on individual agreements please visit the Manitoba government website: https://www.gov.mb.ca/inr/settlements-and-other-agreements/index.html Fields included [Alias (Field Name): Field description] OBJECTID (OBJECTID): Sequential unique whole numbers that are automatically generated ID Number (ID): A unique number identifying the Community Interest Zone First Nation (FIRST_NATION): Name of the First Nation for whom the Community Interest Zone area is reserved Community Interest Zone Name (NAME): Name of Community Interest Zone area

DescriptionConservation of marine biodiversity requires understanding the joint influence of ongoing environmental change and fishing pressure. Addressing this challenge requires robust biodiversity monitoring and analyses that jointly account for potential drivers of change. Here, we ask how demersal fish biodiversity in Canadian Pacific waters has changed since 2003 and assess the degree to which these changes can be explained by environmental change and commercial fishing. Using a spatiotemporal multispecies model based on fisheries independent data, we find that species density (number of species per area) and community biomass have increased during this period. Environmental changes during this period were associated with temporal fluctuations in the biomass of species and the community as a whole. However, environmental changes were less associated with changes in species’ occurrence. Thus, the estimated increases in species density are not likely to be due to environmental change. Instead, our results are consistent with an ongoing recovery of the demersal fish community from a reduction in commercial fishing intensity from historical levels. These findings provide key insight into the drivers of biodiversity change that can inform ecosystem-based management.The layers provided represent three community metrics: 1) species density (i.e., species richness), 2) Hill-Shannon diversity, and 3) community biomass. All layers are provided at a 3 km resolution across the study domain for the period of 2003 to 2019. For each metric, we provide layers for three summary statistics: 1) the mean value in each grid cell over the temporal range, 2) the probability that the grid cell is a hotspot for that metric, and 3) the temporal coefficient of variation (i.e., standard deviation/mean) across all years.Methods:The analysis that produced these layers is presented in Thompson et al. (2022). The analysis uses data from the Groundfish Synoptic Bottom Trawl Research surveys in Queen Charlotte Sound (QCS), Hecate Strait (HS), West Coast Vancouver Island (WCVI), and West Coast Haida Gwaii (WCHG) from 2003 to 2019. Cartilaginous and bony fish species caught in DFO groundfish surveys that were present in at least 15% of all trawls over the depth range in which they were caught were included. This depth range was defined as that which included 95% of all trawls in which that species was present. The final dataset used in our analysis consisted of 57 species (Table S1 in Thompson et al. 2022).The spatiotemporal dynamics of the demersal fish community were modeled using the Hierarchical Modeling of Species Communities (HMSC) framework and package (Tikhonov et al. 2021) in R. This framework uses Bayesian inference to fit a multivariate hierarchical generalized mixed model. We modeled community dynamics using a hurdle model, which consists of two sub models: a presence-absence model and a biomass model that is conditional on presence. Our list of environmental covariates included bottom depth, bathymetric position index (BPI), mean summer tidal speed, substrate muddiness, substrate rockiness, whether the trawl was inside or outside of the ecosystem-based trawling footprint, and survey region (QCS & HS vs. WCVI & WCHG)), mean summer near-bottom temperature deviation, mean summer near-bottom dissolved oxygen deviation, mean summer cross-shore and along-shore current velocities near the seafloor, mean summer depth-integrated primary production, and local-scale commercial fishing effort.Layers are provided for three community metrics. All metrics should be interpreted as the value that would be expected in the catch from an average tow in the Groundfish Synoptic Bottom Trawl Research Surveys taken in a given 3 km grid cell. Species density (sometimes called species richness) should be interpreted as the number of the 57 species that would be caught in a trawl. Hill-Shannon diversity is a measure of diversity that gives greater weight to communities where biomass is spread equally across species. Community biomass is the total biomass across all 57 species that would be expected to be caught per square km in an average tow. Data Sources:Research data was provided by Pacific Science's Groundfish Data Unit for research surveys from the GFBio database between 2003 and 2019 that occurred in four regions: Queen Charlotte Sound, Hecate Strait, West Coast Haida Gwaii, and West Coast Vancouver Island. Our analysis excludes species that are rarely caught in the research trawls and so our estimates would not include the occurrence or biomass of these rare species.Commercial fishing data was accessed through a DFO R script detailed here: https://github.com/pbsassess/gfdata. Local scale commercial fishing effort was calculated from this data. The substrate layers were obtained from a substrate model (Gregr et al. 2021). The oceanographic layers (bottom temperature, dissolved oxygen, tidal and circulation speeds, primary production) were obtained from a hindcast simulation of the British Columbia continental margin (BCCM) model (Peña et al. 2019).Uncertainties:Species that are not well sampled by the trawl surveys may not be accurately estimated by our model. The model did not include spatiotemporal random effects, which likely underestimates spatiotemporal variability in the region. It is also important to underline covariate uncertainty and model uncertainty. The hotspot estimates provide one measure of model uncertainty/certainty.

Mean zooplankton biomass (g/m³) at the 46 stations grouped into Atlantic Zone Monitoring Program (AZMP) transects under Quebec region responsibility.Mean zooplankton wet weights of the last ten years are displayed as 4 layers in june (2013-2022, 2020 not sampled) and 4 layers in november (2013-2022). The 4 layers stand for total zooplankton, mesozooplankton, macrozooplankton and euphausiids. The attached files contain the biomass data: a .png file for each station, showing time series of biomass for the total zooplankton and the euphausiids, and a .csv file containing the data themselves (columns : Station,Date(UTC), Latitude, Longitude, Sounding(m), Depth_max/Profondeur_max(m), Depth_min/Profondeur_min(m), Mesozooplankton/Mésozooplancton(g/m³), Macrozooplankton/Macrozooplancton(g/m³), Zooplankton/Zooplancton(g/m³), Euphausiids/Euphausides(g/m³)).PurposeThe Atlantic Zone Monitoring Program (AZMP) was implemented in 1998 with the aim of increasing the Department of Fisheries and Oceans Canada’s (DFO) capacity to detect, track and predict changes in the state and productivity of the marine environment.The AZMP collects data from a network of stations composed of high-frequency monitoring sites and cross-shelf sections in each following DFO region: Québec, Gulf, Maritimes and Newfoundland. The sampling design provides basic information on the natural variability in physical, chemical, and biological properties of the Northwest Atlantic continental shelf. Cross-shelf sections sampling provides detailed geographic information but is limited in a seasonal coverage while critically placed high-frequency monitoring sites complement the geography-based sampling by providing more detailed information on temporal changes in ecosystem properties.In Quebec region, two surveys (46 stations grouped into transects) are conducted every year, one in June and the other in autumn in the Estuary and Gulf of St. Lawrence. Historically, 3 fixed stations were sampled more frequently. One of these is the Rimouski station that still takes part of the program and is sampled about weekly throughout the summer and occasionally in the winter period.Annual reports (physical, biological and a Zonal Scientific Advice) are available from the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Devine, L., Scarratt, M., Plourde, S., Galbraith, P.S., Michaud, S., and Lehoux, C. 2017. Chemical and Biological Oceanographic Conditions in the Estuary and Gulf of St. Lawrence during 2015. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/034. v + 48 pp.Supplemental InformationZooplankton is sampled by bottom-surface vertical net tow with a conic 202 µm net and preserved in a 4% solution of buffered formaldehyde according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.

__The link: *Access the data directory* is available in the section*Dataset Description Sheets; Additional Information*__.The Directorate of Forest Inventories (DIF) carries out assessments of tree biomass and their carbon content at the scale of ecoforest stands to deepen knowledge on the contribution of forests in the global carbon cycle. This information can be useful in the context of climate change to document the mitigating role played by forests.The resulting product, a database containing a single table entitled “BIOMASSE_CARBONE_PEE_ORI_PROV”, shows the biomass and carbon values of living trees above ground for all productive ecoforest stands.The exploitation of the database requires the data from [the original ecoforest map] (https://www.donneesquebec.ca/recherche/dataset/resultats-d-inventaire-et-carte-ecoforestiere) and the establishment of a connection with the information of the polygonal entity class of settlements.The database includes biomass variables converted to carbon stocks, detailing the biomass of wood, bark, branches, and foliage. For a thorough understanding, you can consult the Read Me associated with this product and the publication [“Biomass and carbon forests in southern Quebec - Method and use”] (https://mrnf.gouv.qc.ca/nos-publications/biomasse-carbone-forestiers-quebec-meridional/) (MRNF, 2026) which offers additional methodological information.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Community Energy and Emissions Inventory (CEEI) Primary Indicators Per Capita 2007 Reporting Year by Community

The “Biomass Inventory Cartographic Layer” dataset provides the information that is used with the Biomass Report Framework to generate a visual representation of the availability of agricultural and forestry biomass and municipal solid waste in Canada. In addition to yield and production information for biomass produced by the agricultural and forestry industries, this dataset also provides information about the demand for agricultural residues for cattle feed and bedding, tillage systems currently in use on agricultural lands, and land suitability for hybrid poplar and willow plantations that are grown specifically to produce biomass.Agricultural information includes the median annual residue yield and available residue amounts. Residue yields were calculated using crop-to-residue ratios. The available residue information includes the amount that is available after adjusting for the estimated demand of straw used for cattle feed and bedding. Forestry estimates include average residue production, based on forestry activities including permitted amounts of harvesting, mills in operation and mill production.Municipal Solid Waste information includes organic waste (food and yard), paper waste and total residential municipal solid waste (which includes organic and paper waste, among others).