The Canadian Aquatic Biomonitoring Network (CABIN) is an aquatic biomonitoring program for assessing the health of fresh water ecosystems in Canada. Benthic macroinvertebrates are collected at a site location and their counts are used as an indicator of the health of that water body. CABIN is based on the network of networks approach that promotes inter-agency collaboration and data-sharing to achieve consistent and comparable reporting on fresh water quality and aquatic ecosystem conditions in Canada. The program is maintained by Environment and Climate Change Canada (ECCC) to support the collection, assessment, reporting and distribution of biological monitoring information. A set of nationally standardized CABIN protocols are used for field collection, laboratory work, and analysis of biological monitoring data. A training program is available to certify participants in the standard protocols. There are two types of sites in the CABIN database (reference and test). Reference sites represent habitats that are closest to “natural” before any human impact. The data from reference sites are used to create reference models that CABIN partners use to evaluate their test sites in an approach known as the Reference Condition Approach (RCA). Using the RCA models, CABIN partners match their test sites to groups of reference sites on similar habitats and compare the observed macroinvertebrate communities. The extent of the differences between the test site communities and the reference site communities allows CABIN partners to estimate the severity of the impacts at those locations. CABIN samples have been collected since 1987 and are organized in the database by study (partner project). The data is delineated by the 11 major drainage areas (MDA) found in Canada and each one has a corresponding study, habitat and benthic invertebrate data file. Links to auxiliary water quality data are provided when available. Visits may be conducted at the same location over time with repeat site visits being identified by identical study name / site code with different dates. All data collected by the federal government is available on Open Data and more partners are adding their data continually. The csv files are updated monthly. Contact the CABIN study authority to request permission to access non open data.

Existing and Cancelled Trapline Cabin Sites within the Kootenay Region (qtrpcbr4).

Cabin and back country camp sites located within Cascade, Cathedral and E.C. Manning Provincial Park

This theme presents the index of water health along the banks of the St. Lawrence River. It makes it possible to determine if the sites present risks to human health and if they are suitable for swimming.These data are the result of an exploratory monitoring program that aims to raise awareness among the population and local actors about the possible reopening of bathing sites that have good potential. This program also makes it possible to highlight any improvement in bacteriological quality resulting from the reduction of wastewater overflows during rainy weather or resulting from the installation of disinfection equipment.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Forest Total Aboveground Biomass 2015Total aboveground biomass. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Individual tree total aboveground biomass is calculated using species-specific equations. In the measured ground plots, aboveground biomass per hectare is calculated by summing the values of all trees within a plot and dividing by the area of the plot. Aboveground biomass may be separated into various biomass components (e.g. stem, bark, branches, foliage) (units = t/ha). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

This feature class identifies active areas designated for personal use woodcutting where harvesting dead or downed fuelwood can occur for purposes such as home heating. Certain areas have seasonal restrictions or additional terms and conditions. A forest resources permit is required to cut in these areas; this free permit authorizes a limit of 25m 3 (11 cords) of firewood. Failure to have a permit or carry it with you when cutting could result in enforcement action.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset provides wall-to-wall maps of forest structure across Canada's 650 million hectare forested ecosystems for the year 2022, generated at a spatial resolution of 30 m. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Structure estimates include key attributes such as canopy height, canopy cover, and aboveground biomass, derived using a combination of airborne lidar and Landsat-based spectral composites. Structure models were trained using the - lidar-plot framework - (Wulder et al. 2012), which integrates co-located airborne lidar data and ground plot measurements with Landsat time-series composites (Hermosilla et al. 2016). A Nearest Neighbour imputation approach was applied to estimate structural attributes across the full extent of Canada's forested area. These nationally consistent products are intended to support strategic-level forest monitoring and assessment and are not designed for operational forest management.For further details on the methods, accuracy assessment, and source data, see Matasci et al. (2018).Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment, 216, 697-714. https://doi.org/10.1016/j.rse.2018.07.024 (Matasci et al. 2018)

This feature delineates forest health disturbances which includes Abiotic and Biotic forest health agents in the Yukon at a scale of 1:100,000. It is a management level forest health overview survey (as opposed to an operational level) - meaning that analysis and mapping are most effective close to the 1:100,000 scale and not larger. This Forest Health Overview surveys has been completed in various stages: 1 ) Starting with mapping the disturbance type, and severity from the Air using Fix wing aircraft on to hardcopy 1:100,000 scale maps ; 2 ) Transfering the Data to a clean Mylar for scanning and digitizing ; and, 3 ) Scanning and digitizing and populate data into GIS spatial database .Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This publication contains thirteen (13) maps of different biogeochemical and soil properties of forest ecosystems of Canada’s managed forest. A scientific article gives additional details on the methodology: Paré, D., Manka, F., Barrette, J., Augustin, F., Beguin, J. 2021. Indicators of site sensitivity to the removal of forest harvest residues at the sub-continental scale: mapping, comparisons, and challenges. Ecol. Indicators. https://dx.doi.org/10.1016/j.ecolind.2021.107516

Description:Biophysical Units: Under the Pacific Marine Ecological Classification System (PMECS; DFO 2016; Rubidge et al. 2016), biophysical units are areas of distinct physiographic and oceanographic conditions and processes that shape species composition at spatial extents of 1000s of km. Geomorphic units:Geomorphic units or geozones are discrete geomorphological structures at the scale of 100s of km that are assumed to have distinctive biological assemblages (e.g., plateaus, ridges, seamounts, canyons). Although the spatial scale of geomorphic units is nested within biophysical units, a single geomorphic unit such as a trough may span more than one biophysical unit. The following 5 layers are included in this geodatabase:1. Biophysical_Units_L4A - Predicted PMECS Biophysical Units (Level 4A) output from the random forest analysis2. Biophysical_Units_L4B - Predicted PMECS Biophysical Units (Level 4B) output from the random forest analysis3. Biophysical_Units_ProbAssign_L4AB - Layer showing the probability that a grid cell was assigned to a given biophysical unit in the final random forest predictive modelling step4. Cluster_L4AB - Layer showing the output of species assemblage cluster analysis5. Geomorphic_Units - Geomorphic units for the BC coast that combines geomorphic units produced by Rubidge et al. 2016) and Proudfoot and Robb (2022).Methods:Biophysical Units:Rubidge et al. (2016) used a two-step process to identify biophysical units in British Columbia. First, a cluster analysis based on the similarity of species composition was used to group sites with similar species into distinct biological assemblages. Second, a random forest analysis was used to identify environmental correlates of the biological assemblages identified by the cluster analysis and to predict and assign the biological assemblage present in areas with too few biological data. Two different similarity thresholds were used to identify two levels (4A, 4B) of biophysical units; see Rubidge et al. (2016) for details. Indicator species for each assemblage (biophysical unit) were also identified.Geomorphic units:Rubidge et al. (2016) used the benthic terrain modeller (BTM) tool with broad and fine-scale benthic positioning index (BPI) parameters to define geomorphic units on the continental shelf in the Northern Shelf Bioregion and the continental slope in both the Northern Shelf Bioregion and Southern Shelf Bioregion. In 2022, geomorphic units were produced for the Strait of Georgia and Southern Shelf Bioregions following the same methods as Rubidge et al. (2016) (Proudfoot and Robb 2022). The geomorphic units produced as part of the PMECS process were merged with the geomorphic units produced for the Strait of Georgia and Southern Shelf bioregions to produce a continuous spatial data product representing geomorphic units for the Canadian Pacific continental shelf and slope. After merging, the geomorphic units produced in 2016 were unchanged (i.e., they are consistent with the original geomorphic units described in Rubidge et al. 2016).Data Sources:From Rubidge et al. (2016): Species data was taken from Fisheries and Oceans Canada (DFO) standardized fisheries-independent research surveys: groundfish trawl and long-line (2003-2013), Tanner Crab trawl and trap (2000–2006), and Dungeness Crab trap (2000–2014). Environmental data came from NASA, the Canadian Hydrographic Service, Fisheries and Oceans Canada, Bio-ORACLE, and elsewhere (details in Rubidge et al. 2016). From Proudfoot and Robb (2022): bathymetry data came from Natural Resources Canada (details in Proudfoot and Robb 2022).Uncertainties:The data is intended for use at the bioregional scale, and caution should be used for finer-scale analyses.