The spatial representation for a Forest Exclusion, which is an areas or block excluded from Provincial Forest at the time of the original establishment by Order in Council

Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Blocks are the second finest level of the coal grid. A block consists of 100 units divided into 10 rows by 10 columns. There are also 12 blocks in a group, comprising 3 rows by 4 columns and labelled A to L. E.G. 084E05L

This is a spatial layer that reflects operational activities for cutblocks contained within harvesting authorities. The Forest Tenures Section (FTS) is responsible for the creation and maintenance of digital Forest Atlas files for the province of British Columbia encompassing Forest and Range Act Tenures. It also supports the forest resources programs delivered by MoFR. Each feature contains a Ministry of Forests and Range (MoFR) FEATURE_CLASS_SKEY (number) column that further defines the type of that feature. The layer contains cutblock boundaries for the following feature classes: Forest Licence Cut Block (555), Licence to Cut Cut Block (616), Timber Licence Cut Block (810), Timber Sale Licence Major Cut Block (817), Timber Sale Licence Minor CB Non Replaceable (820), Tree Farm Licence Cut Block (833), Wood Lot Licence Cut Block (863), Community Forest Cut Block (2402), and Timber Sale Licence Minor CB Replaceable (2417). Each cut block has a life cycle status that is either PENDING - the cut block has been submitted as a new cut block or an amendment, but is not yet approved or rejected, ACTIVE - the cut block is approved and activities may be taking place on the cut block, or RETIRED - all activities, with respect to the harvesting authority, have been completed for the cut block

Bait resources in most of the province are assigned to harvesters through the use of a block system -- 1 harvester per 'bait harvest' area. There are exceptions to the block system (e.g., Lake Erie), where bait is allocated to multiple users fishing the same area.

This information is used  to manage oil and gas rights on offshore Crown lands in Ontario. A grid system of blocks and tracts is used to divide the area. 1 block =  5 minute longitude by 5 minute latitude numbered area. 1 tract =  1 minute longitude by 1 minute latitude area, assigned by letters . 1 block contains 25 tracts. This product requires the use of geographic information system (GIS) software.

Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Units are the finest level of the Coal Grid. They are defined by UTM coordinates for their corners and the mid points of the four sides. A unit is the base building block for creating the Coal Grid. In a block there are 100 units, 10 rows by 10 columns, and numbered consecutively, starting in the southeast corner. The units are numbered 1 to 10, 11 - 20 etc. always reading from right to left. E.G. 082E05D007

Often these parcels were surveyed before township surveys in their area. They may also be supplemental to them (as is the case with some Cadastral Islands). Sometimes these were laid out after a township survey was done, so some may be part of a geographic township. Cadastral Location includes the following: GTP Block - Timber block used by the Grand Trunk Pacific Railway for feeding steam engines, building bridges, and for supplying railway ties. Mining Location - A parcel of land whose surveyed boundaries were laid out during the late nineteenth century for the Crown sale of land for mining purposes to groups or individuals. Cadastral Island - Island delineated on survey plans. It may or may not be part of a geographic township. Other Location - A parcel of land whose surveyed boundaries were laid out during the late nineteenth century for the Crown sale of land for various agricultural or farming purposes to groups or individuals. These locations are mainly found in Northern Ontario and also exist in the un-surveyed territories.

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the Universal Transverse Mercator (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator. This data class shows a 1 km x 1 km UTM NAD83 grid that is a standard reference index for Ontario. It includes: * Military Grid Reference * Fire Base Map identifier * Fire Base Map Block * Atlas identifier

The spatial representation for current Timber Supply Blocks (TSB). A Timber Supply Area is a designated area established by the Ministry in order to practice sound, integrated, resource management principles to improve the allowable annual cuts. TSAs were originally defined by an established pattern of wood flow from management units to the primary timber-using industries. They are the primary unit for allowable annual cut (AAC) determination. A TSA Supply Block is a designated area within the TSA where the Ministry approves the allowable annual cuts

Yukon First Nations and Tetlit Gwich'in settlement lands including both rural blocks (R-block) and Fee Simple lands of the First Nations that have ratified their agreements. This data was built using the 1:1,000,000 Digital Chart of the World (DCW) as the base and the 1:30,000 signed Territorial Research Base Maps (TRBM) to define the boundaries.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)