All fundamental watershed polygons generated from watershed boundary lines, bank edges, delimiter edges, coastline edges, and administrative boundary edges

All bank edges (of rivers, lakes, and wetlands), delimiter edges, glacier edges, and administrative boundary edges. These are the linear features that makeup the polygonal waterbodies

All principal and non-principal watershed boundary edges. These are the linear features that makeup the watershed polygons

Watershed boundary delineated for Canada-BC hydrometric stations. Currently, watersheds were delineated using 1:50,000 scale boundaries in 1996, and many watersheds encompass entire drainages, instead of just the upstream watersheds. Note - Not yet available, but we are in the process of generating BC hydrometric station upstream watersheds using updated base data, using the following method: Within BC, watershed boundaries are based on the 1:20,000-scale Freshwater Atlas fundamental watersheds, and trimmed using the BC TRIM DEM used to approximate the height-of-land at the station locations. Outside of BC, but within Canada, watershed boundaries were approximated using Canada CDED DEM data for delineation (no "stream burning" was used) and some manual editing of boundaries was done to approximately match hydrology data after the fact. Within U.S.A., the USGS Watershed Boundary Dataset was used (at the best scale available for each drainage) to delineate the watershed boundary, with the watershed trimmed using the USGS National Elevation Dataset to approximate the height-of-land when necessary.

Domestic Watersheds for the Kootenay Boundary Landuse Plan (ldws_r4)

This data is intended to identify Canadian fresh waters which require additional measures (e.g., ballast water exchange and treatment) prior to release, as described in https://tc.canada.ca/en/marine-transportation/marine-safety/list-canada-s-designated-alternate-ballast-water-exchange-area-fresh-waters-tp-13617e-2021. The data is not intended for navigation purposes.According to Canada’s Ballast Water Regulations, vessels which are managing ballast water to meet the ballast water performance standard cannot release ballast water into fresh waters unless that ballast water was first exchanged in accordance with the ballast water exchange standard. For the purpose of this requirement, Canadian fresh waters are the following:- the waters at the Port of Kitimat and waters in or upstream of the Kitimat Arm, east of a line between Hilton Point and Steel Point;- the waters at the Port of Stewart and waters in or upstream of the Portland Canal, north of a line between Portland Point and Ramsden Point;- the waters of all Fraser River ports that are: -- east of Tilbury Island in the main arm of the Fraser River including Annacis Island and New Westminster docking areas; and -- east of the eastern tip of Mitchell Island in the north arm of Fraser River;- the waters of the Saguenay River ports and waters upstream of L’Anse-Creuse;- the waters of all St. Lawrence River ports and waters west of the east point of Ile d’Orléans including the port of Quebec City;- all Canadian waters of the Great Lakes Basin; and- the waters of Happy Valley-Goose Bay and waters of Lake Melville west of Rabbit Island.Legal Constraints: Users should be aware that the polygons depicting areas requiring additional measures to manage ballast water are intended for illustration only and should not be used for navigational or legal purposes.

This boundary is used in the management of watershed-based planning by the Lake Simcoe Region Conservation Authority (LSRCA). It is used to support the Lake Simcoe Protection Act (LSPA). Instructions for downloading this dataset: * select the link below and scroll down the metadata record page until you find **Transfer Options** in the **Distribution Information** section * select the link beside the **Data for download** label * you must provide your name, organization and email address in order to access the dataset This product requires the use of GIS software. *[LSPA]: Lake Simcoe Protection Act *[GIS]: geographic information system *[LSRCA]: Lake Simcoe Region Conservation Authority

Aquatic invasive species pose economic and ecological threats to Canada's coastal waters. In response, Fisheries and Oceans Canada (DFO) has established monitoring programs to detect and track the spread of aquatic invasive species, including European Green Crab, in Canadian waters. Fukui traps have been deployed annually at both new and long-term monitoring locations throughout coastal British Columbia.

The Maritimes Region is divided into seven Clam Harvesting Areas (CHA).CLAM HARVESTING AREA 1 is described as follows:The inland and tidal waters of the counties of Colchester, Cumberland and Hants that border and flow into the Bay of Fundy.CLAM HARVESTING AREA 2 is described as follows:The inland and tidal waters of the counties of Annapolis, Digby and Kings.CLAM HARVESTING AREA 3 is described as follows:The inland and tidal waters of Yarmouth County.Time restrictions for Clam Harvesting Area 3: No person shall fish for clams from sunset each Saturday until sunrise on the following Monday (closed Sundays) in the boundaries of Clam Harvesting Area 3.CLAM HARVESTING AREA 4 is described as follows:The inland and tidal waters of the counties of Shelburne, Queens and Lunenburg and that portion of Halifax County west of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 5 is described as follows:The inland and tidal waters of Guysborough County and that portion of Halifax County east of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 6 is described as follows:The inland and tidal waters of the counties of Richmond and Cape Breton, all of Victoria County except that portion between Cape North and Inverness County and that portion of Inverness County that borders on the Bras d'Or Lakes.NEW BRUNSWICK - BAY OF FUNDY CLAM HARVESTING AREA 7 is described as follows:The inland and tidal waters of the counties of Charlotte, Saint John and Albert that flow into the Bay of Fundy.

The Plains, Northern, Foothills Boundary feature class contains polygon features representing Department of Energy Regional Boundaries for the Province of Alberta.