Temporal analysis of changes in Calgary, Alberta, based on GeoAI features automatically extracted from satellite images acquired in 2011 and 2021. Simple geospatial analysis intersecting Statistics Canada's Open Database of Buildings, version 3 (ODB v3) with GeoAI multidate building features enables the detection of buildings observed in 2021 that were not detected in 2011. The addition of new buildings is a good indicator of urban development and/or sprawl. Using the same approach, GeoAI multidate roads enable the detection of Statistics Canada's National Roads Network (NRN) segments present in 2021 and/or in 2011. The development of new roads is also indicator of urban development and/or sprawl. Complementarily, an analysis of changes in the forest coverage from the GeoAI datasets is done. This analysis reflects the gains and losses between both dates..‌GeoAI enables temporal coverage of various areas in Canada, thus providing a useful tool for change detection and trend analysis at high resolution. While the series is still fairly new, and such examples are limited for the time being, NRCan strives to gradually increase its GeoAI data offering for both spatial and temporal coverage.For more information about the GeoAI - GeoBase Series, please visit the following link: https://open.canada.ca/data/en/dataset/74738ff5-5367-5958-9aee-98fffdcd1876

This GIS dataset depicts the structural bedrock top surface in the Edmonton-Calgary Corridor based on water-well litholog data, including bedrock outcrop locations. We sourced the well data from an internal Edmonton-Calgary Corridor geological mapping database. This surface provides a geological model for the region. These data comprise the raster surface of Alberta Geological Survey Map 549, Bedrock Topography of the Edmonton-Calgary Corridor, Alberta.

This GIS dataset depicts an estimate of average annual groundwater recharge in the Edmonton-Calgary corridor based on hydrological water budget analysis using climate and hydrometric data from Environment Canada, the Water Survey of Canada, and Alberta Environment and Sustainable Resource Development. This average annual groundwater recharge grid was generated to assist in building steady-state numerical groundwater flow models for large regions within the Edmonton-Calgary Corridor.

This GIS dataset depicts the drift thickness in the Edmonton-Calgary corridor based on water-well litholog data and bedrock outcrop locations. We used well data from an internal Edmonton-Calgary corridor geological mapping database. This thickness map was generated to assist in building a geological model for the region. The sediment thickness was generated by subtracting the bedrock topography surface from the 60 m Shuttle Radar Topography Mission v. 2 digital elevation model.

This theme represents the limit of the Quebec territory of the Agreement on Sustainable Water Resources of the Great Lakes and St. Lawrence River Basin. It was generated from the grouping of watersheds at a cartographic scale of 1:20,000. For more information: http://www.environnement.gouv.qc.ca/eau/grandslacs/2005/index.htm**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Hydro Features is composed of the network of Canadian surface waters. Hydro Features entities are: Watercourse, Water Linear Flow, Hydro Obstacle (falls, rapids\...), Waterbody (lake, watercourse\...), Permanent Snow and Ice, Water Well, and Spring. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Boundaries for Yukon regional land use planning. Boundaries are subject to revision as Government and Yukon First Nations agree to commence regional planning. Once appointed and operating, regional land use planning commissions are to develop and recommend a regional land use plan for their region. Yukon Government and affected First Nations will then approve and implement the plan. For more information, please refer to [https://planyukon.ca/index.php/resources/planning-regions](https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=http%3a%2f%2fplanyukon.ca%2findex.php%2fresources%2fplanning%2dregions&umid=6F25C300-8990-EC05-B9CB-56B31836836C&auth=c132af8ee7c9d1278d61a701569070a095ce962e-59acfdec1b910392e8b8e2e1daecb2cc00dab07f)Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Saskatchewan's woodland caribou range is divided into two conservation units, based on the ecozone boundaries of the boreal shield (SK1) and the boreal plain (SK2). The SK2 Caribou Conservation Unit is further divided into three administrative units: SK2 East, SK2 Central and SK2 West.The SK1 (Boreal Shield) Caribou Conservation Unit encompasses the rocky shield, sandy plains and many lakes of northern Saskatchewan. The SK2 (Boreal Plain) Caribou Conservation Unit encompasses the more productive mixed-wood forests and lakes of central Saskatchewan, including large areas of low-lying peatlands. While these two units represent important differences in ecological conditions (e.g., habitat types, fire regimes, landforms, etc.) and human land use and management (e.g., overall levels and types of land use, fire management, etc.), the boundary between SK1 and SK2 does not represent a population boundary, as caribou move freely between the two areas. The large size of the SK2 Caribou Conservation Unit (i.e., 109,717 km2) is not well suited for range assessment and range planning activities, given the large variation in ecological conditions, habitat types, land use, and natural disturbance regimes across the Boreal Plain of Saskatchewan. As a result, three smaller caribou administrative units within SK2 were developed: SK2 East, SK2 Central and SK2 West. SK2 West is further subdivided into two smaller management subunits. At present, the SK1 area has not been sub-divided into administrative units. Find out more about woodland caribou and what the province is doing to manage their habitat and protect their populations: https://www.saskatchewan.ca/business/environmental-protection-and-sustainability/wildlife-and-conservation/wildlife-species-at-risk/woodland-caribou-program

Boundaries for reporting cases of COVID-19 in Saskatchewan. Areas, zones and subzones show the different geographies available; these boundaries are based on statistics Canada source geometry when possible.On August 4th 2020, the province announced it would change the method of reporting COVID-19 cases, moving from six regions based on former Regional Health Authorities to thirteen zones based on Saskatchewan Health Authority geographies. The COVID-19 Zones are made by aggregating the COVID-19 Subzones, which are based on the SHA Health Networks or aggregations thereof. The COVID-19 Areas are an aggregation of the COVID-19 Zones.  Areas, zones and subzones show the different geographies available; these boundaries are based on statistics Canada source geometry when possible.

Represents the gross area boundary within which Saskatchewan Crown resource lands are designated as provincial forests.For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. For the northern, eastern and western portions of the Northern Provincial Forest, boundaries were sourced from the SaskGIS Provincial Boundary data set (ADMINISTRATIVE.provincial_boundary) produced by Information Services Corporation. This data set depicts the provincial boundary of the province of Saskatchewan as reflected in the respective jurisdictional boundary acts, and is kept current on a monthly basis. The version used here has an effective date of 31 May 2020. Crown resource lands contained within these boundaries are designated as provincial forest. Certain lands have been deemed to be withdrawn from the provincial forest pursuant to subsection 12(4) of the Act. The Forest Resources Management Act The Forest Resources Management Regulations