A research survey on American lobster (Homarus americanus) and rock crab (Cancer irroratus) has been carried out annually on the Magdalen Islands since 1995 to assess the abundance and structure of populations in this area. The survey is carried out during the first two weeks of September and covers the southern part of the Magdalen Islands, from "Baie de Plaisance" to "Grande-Entrée", extending slightly eastwards between "Havre-aux-Maisons" and "Grande-Entrée". The survey lasts 8 to 15 days, depending of the weather conditions, and covers a maximum of 48 stations. Approximately half of the stations are surveyed in duplicate (two tows per station). The tows always cover 500 meters, with a slightly variable trawl opening (as explained above), averaging around 10 meters.The gear used is a Nephrops trawl, a benthic trawl originally developed for langoustine fishing in Brittany, but slightly modified to target lobster. The trawl is deployed from the CCGS Leim and the harvested organisms are hauled aboard and sorted. Cephalothorax length, sex and shell stage are recorded for all lobsters. This is supplemented by information on reproductive conditions for certain size classes, and dissections of 25 males and 25 females per mission. Rock crabs are also included in the survey and are counted with additional measurements of shell width, sex and shell condition that are recorded on predetermined stations. For other stations individuals data are collected depending on the time available between trawl hauls.The publication contains 4 files; the "Information_stations" file which contains the data of the stations, the "Data_homard_lobster_survey" file which contains the measurements of each lobster, the "Nombre_crabe_crab_number" file which contains the count of rock crabs, the "Mesure_crabe_crab_measurement" file contains the characteristics measured for each crab. Each of the files can be linked by the "date", "st", "tr" columns. The “bat” column notes the boat code, because the gear is not deployed in the same way on each boat.*This record consist of raw data and quality has not been verifiedAssociated species are identified and semi-quantitatively counted directly on the sorting table, and the results are presented in the following publication: https://open.canada.ca/data/en/dataset/99cb7034-f3d5-4da4-a5bc-e81315cfb8eb

This data report provides information on temperature and salinity in the Godbout region of the St. Lawrence Estuary. Sampling was carried out from 2019 to 2021 over an area of <5 km2. The databases provide information on temperature and salinity at an hourly rate for 2 years. The aim of this project is to analyze telemetry data from sea urchins (Strongylocentrotus droebachiensis), snow crabs (Chionoecetes opilio), rock crabs (Cancer irroratus), spider crabs (Hyas spp.) and whelks (Buccinum undatum). This report focuses on the presentation of benthic environmental data collected throughout the study with high spatial and temporal resolution. All reported variables were collected at the seafloor, as the aim of the project was to study the movement of epibenthic species. Temperature data were collected from three devices: telemetry receivers with integrated temperature sensors (InnovaseaTM), HoboTM and Star-OddiTM probes. Temperature data processing involved cleaning up extreme values (below 2°C and above 20°C) and homogenizing the data to fit the bathymetry matrix (1m x 1m cells) of the study site. Temperature data are provided in a NetCDF file with a matrix of the entire study site, where there is a stratum for each hour between August 2019 and October 2021 and in each file, a temperature value for each pixel of the raster. Salinity data were collected from Star-OddiTM probes only. Salinity values were averaged hourly for the entire study area. Salinity data is provided as a CSV file with one salinity value per hour for the entire study area.

SummaryThe Quebec region of the Department of Fisheries and Oceans (DFO) is responsible for the assessment of several fish and invertebrate stocks exploited in the Estuary and the northern Gulf of St. Lawrence. The commercial catches sampling program is one of the sources of information used to complete these assessments. The data collected by this program, at wharf or at sea, offers among other things the advantage of a relatively large spatio-temporal coverage and provides some of the necessary knowledge to assess the demography and the structure of the exploited populations. This program is implemented by specialized DFO staff whose main mandate is to collect biological data on groundfish, pelagic fish and marine invertebrate species that are commercially exploited in the various marine communities.DataThis dataset on the common rock crab (Cancer irroratus) includes the metadata, sample weight, shell width, shell condition and the sex of the specimens measured. This dataset covers the periods of 1990 and 1995 to present. In order to protect the confidentiality of the sources, some informations (such as those concerning the vessel) have been excluded and others (such as the date of capture) have been simplified. Entries where there was only one vessel in a fishing area for a given year were also excluded. Further information including the fishing areas coordinates can be found by clicking on the «Atlantic and Arctic commercial fisheries» and «Fishing areas» links below.

This data set provides geographic information for Health PEI facilities (Hospitals, Cancer Treatment Centres, Palliative Care Centre, Primary Care Networks, and Public Nursing Homes.

Cold-water corals are conspicuous in the waters off Eastern Canada. Despite that, there are few DNA sequence records from specimens collected in the region available in GenBank, and not all species recorded in the region have sequence data regardless of geographic origin. This can limit the use of eDNA techniques to detect and identify corals. Our objective was to sequence and publish sequences for two octocoral DNA barcoding markers: CO1 and MutS. We sequenced and deposited 36 sequences to GenBank from 19 specimens representing three sea pen taxa (Octocorallia: Pennatuloidea): Distichoptilum gracile, Pennatula aculeata, and Protoptilum carpenteri. Identification of all specimens was confirmed by B. M. Neves before submission. Specimens and DNA tissues were donated to the Canadian Museum of Nature, where they are currently stored. This publication is part 1 of a series of GenBank submissions by our lab.Specimens were collected from across the Northwest Atlantic and originate from depths ranging between 200-1924 meters. Specimens were collected as part of research vessel multispecies trawl surveys or remotely operated vehicle (ROV ROPOS) surveys. DNA was isolated and purified using the QIAgen DNeasy Blood and Tissue kit, with an initial overnight incubation with Proteinase K. Two commonly used octocoral barcoding regions were amplified using previously described primers: 1) COII8068F (McFadden et al., 2004) and COIOCTR (France and Hoover, 2002) for the CO1 gene, and 2) ND42599F (France and Hoover, 2002) and mut3458R (Sánchez et al., 2003) for the MutS gene. Amplifications were conducted using 12.5 µl of Green DreamTaq Master Mix (Thermo Fisher Scientific), 1 µl of template DNA, 0.5 µl of each 10 µM forward and reverse primers, 0.5 µl of 10 µM reverse primer, and 10.5 µl of water. Thermocycling was run as follows: 3 min of initial denaturation at 95 °C, followed by 40 cycles at 95 °C for 30 s, 30 s at annealing temperature of 48 °C, then 65 s at an extension temperature of 72 °C, and a final elongation at 72 °C for 4 min. PCR products were cleaned using Agencourt AMPure XP Beads (Beckman Coulter) and sent to The Center for Advanced Genomics, Toronto, Canada for Sanger sequencing. Sequences were visualized and aligned using Geneious Prime 2022.0.2. Obtained sequences have been deposited in GenBank under accession numbers OQ569768- OQ569784 and OQ420359- OQ420377. This work was funded by Fisheries and Oceans Canada under an Enhanced Regional Capacity grant (2020-2021) and the Marine Conservation Targets (MCT) program (2021-2024), Newfoundland and Labrador Region.

CMIST is a peer-reviewed screening-level risk assessment tool for marine invasive species (Drolet et al. 2016). It is a short questionnaire that follows the invasion process from arrival to impact and is designed so an informed assessor can evaluate one species in an assessment area in approximately one day using easily accessible information from internet databases, primary literature, and grey literature. Species can be those with an invasion history in an area or those that are candidates for future invasions.CMIST is score-based and incorporates both likelihood and impact of invasion as well as uncertainty. Questions are general to make CMIST broadly applicable to different taxa, different assessment areas, and different project goals. To date, CMIST has been tested with molluscs, tunicates, crustaceans, and polychaetes introduced or at risk of introduction to three Canadian marine ecoregions (DFO 2009). CMIST has also been successfully applied to non-indigenous freshwater fish in British Columbia with adapted guidelines (T. Therriault, pers. comm.). Upon completion, CMIST produces a risk score adjusted for the assessor’s uncertainty which, combined with information collected during the assessment, can be used to assist in management decisions. For example, in 2015, CMIST assessments were used to identify high risk invaders in three Canadian marine ecoregions (DFO 2016).

This dataset represents the radioisoptopic tracers for selected rocks in the province of Saskatchewan, Canada.This dataset represents the compilation of radioisoptopic tracers for selected rocks in the province of Saskatchewan, Canada.  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

Since 1985, research surveys targeting scallops—primarily the sea scallop (Placopecten magellanicus) and, to a lesser extent, the Icelandic scallop (Chlamys islandica)—have been conducted by Fisheries and Oceans Canada (DFO) at one- or two-year intervals around the Magdalen Islands (fishing area 20A). The main objective of this survey is to assess the status of sea scallop stocks. The study area is situated south of the Magdalen Islands, where scallop beds are typically sampled at depths ranging from approximately 25 to 35 m. Sampling stations are randomly selected from a predetermined fixed grid, with sampling conducted along transects at these randomly assigned locations within the study area. Each station is sampled using a lined Digby scallop dredge (20 mm mesh size), towed for roughly 500 m across the seabed.This publication includes three files: the file biometriePetoncle_20, which contains detailed biometric data (species, size, weights and sex) from 1998 to 2024; the file taillePetoncle_20, which provides the size of the individuals sampled from 2009 to 2024; and the file traitPetoncle_20 which contains the abundances and densities per tow from 2009 to 2024. Data on abundances and densities per tow from 1998-2008 is available upon request.This dataset is updated every one to two years as data becomes available. A cleaning of aberrant data has been carried out. However, there is missing data in various columns of the dataset – use the data with caution. If you have any questions please contact DFO.DataManagementSAISB-GestionDonneesDAISS.MPO@dfo-mpo.gc.ca or the author. For certain time periods, associated species are identified and semi-quantitatively counted directly on the sorting table, and the results are presented in the following publications: - https://open.canada.ca/data/en/dataset/6529a4b0-f863-4568-ac71-1fa26cf68679- https://open.canada.ca/data/en/dataset/71732ad5-5c70-4dbf-916d-a94e1380c53b 

The RADARSAT Constellation is the evolution of the RADARSAT Program with the objective of ensuring data continuity, improved operational use of Synthetic Aperture Radar (SAR) and improved system reliability. The three-satellite configuration provides daily revisits of Canada's vast territory and maritime approaches, as well as daily access to 90% of the world's surface.RCM is tasked solely by the Government of Canada, to acquire data, first and foremost in support of Government of Canada services and needs. RCM data and services contributes to ensuring the safety and security of Canadians; monitoring and protecting the environment; monitoring of climate change; managing Canada’s natural resources; and stimulating innovation, research and economic development. In addition to these core user areas, there are expected to be a wide range of ad hoc uses of RADARSAT Constellation data in many different applications within the public and private sectors, both in Canada and internationally. The current data set reflects the acquisition plans that are designed to meet the RCM SAR imaging demands of the Government of Canada. These are being made available publicly in advance of the acquisitions. To meet the data needs of the Government of Canada, acquisitions may be changed without notice. After their acquisition and processing, the RCM image products listed in the current data set, will be delivered to the Earth Observation Data Management System - EODMS (https://www.eodms-sgdot.nrcan-rncan.gc.ca/index-en.html) portal of Natural Resources Canada. Users can register to the EODMS portal as public users to retrieve the RCM image products. For those requiring a greater access to RCM imagery consisting of product types or spatial resolutions not available to public users: you may apply to upgrade your public account to an ‘RCM external vetted entity’ EODMS user type account. For more information on this process, please contact the Canadian Space Agency using the information available at the following link : https://www.asc-csa.gc.ca/eng/satellites/radarsat/access-to-data/how-to-become-a-user.aspPublication frequency :I. Future acquisition plans are published every two weeks for a two-week window that starts two weeks from the publication date. As an example, acquisition plan published on April 1st covers acquisitions from April 14 to 27. The next plan is published on April 14th and covers from April 28 to May 11.II. Past acquisitions plans are published monthly and covers a period of one month from the first to the last day As an example, acquisition plan published on April 1st covers acquisition made between the March 1 and March 31. The next plan covers the month of April.

Species characterization by environmental DNA (eDNA) is a method that allows the use of DNA released into the environment by organisms from various sources (secretions, faeces, gametes, tissues, etc.). It is a complementary tool to standard sampling methods for the identification of biodiversity. This project provides a list of fish and marine mammal species whose DNA has been detected in water samples collected between 2019 and 2021 using the mitochondrial marker MiFish (12S).The surveys were carried out in the summer of 2019 (July 14-18) and (July 30 - August 5), in the fall of 2020 (October 27-28) and in the summer-fall of 2021 (May 31 - June 3 ) and (August 24-25) between Forestville and Godbout (Haute-Côte-Nord). Sampling was carried out between 1-50 meters depth in 91 stations, with 1 to 3 replicates per station. Two liters of water were filtered through a 1.2 µm fiberglass filter. DNA extractions were performed with the DNeasy Blood and Tissues or PowerWater extraction kit (Qiagen). Negative field, extraction and PCR controls were added at the different stages of the protocol. The libraries were prepared either by Génome Québec (2019, 2020) or by the Genomics Laboratory of the Maurice-Lamontagne Institute (2021), then sequenced on a NovaSeq 4000 PE250 system by Génome Québec. The bioinformatics analysis of the sequences obtained was carried out using an analysis pipeline developed in the genomics laboratory. A first step made it possible to obtain a table of molecular operational taxonomic units (MOTU) using the cutadapt software for the removal of the adapters and the R package DADA2 for the filtration, the fusion, removal of chimeras and compilation of data. The MOTUs table was then corrected using the R package metabaR to eliminate the tag-jumping and take contaminants into consideration. Samples showing a strong presence of contaminating MOTUs were removed from the dataset. The MOTUs were also filtered to remove all remaining adapter sequences and also retain only those of the expected size (around 170 bp). Finally, taxonomic assignments were made on the MOTUs using the BLAST+ program and the NCBI-nt database. Taxonomic levels (species, genus or family) were assigned using a best match method (Top hit), with a threshold of 95%. Only assignments at the level of fish and marine mammals were considered, and the taxa detected were compared to a list of regional species, and corrected if necessary. The species detections of the different replicas have been combined.The file provided includes generic activity information, including site, station name, date, marker type, assignment types used for taxa identification, and a list of taxa or species. The list of taxa has been verified by a biodiversity expert from the Maurice-Lamontagne Institute.This project was funded by Fisheries and Oceans Canada's Coastal Environmental Baseline Data Program under the Oceans Protection Plan. This initiative aims to acquire baseline environmental data that contributes to the characterization of significant coastal areas and supports evidence-based assessments and management decisions to preserve marine ecosystems.Data were also published on SLGO platform : https://doi.org/10.26071/ogsl-2239bca5-c24a