Annual and five-year (5YA) average wet deposition maps for the ammonium ion are available. The file formats include geodatabase files (*.gdb) compatible with geospatial software (e.g. ESRI ArcGIS) and KMZ files compatible with virtual globe software (e.g. Google Earth™). Maps can also be viewed online via Open Maps and the ArcGIS online viewer. Annual deposition from each site was screened for completeness using the following criteria: (1) precipitation amounts were recorded for >90% of the year and >60% of each quarter, and (2) ammonium concentrations were reported for >70% of the precipitation measured over the year and for >60% of each quarter. Five-year average wet deposition values are averaged annual deposition values with a completeness criterion >60% for the five-year period. Units for wet deposition fluxes are in kg of NH4 per hectare per year (kg ha-1 y-1). Sources of measurement data and spatial interpolation method are described here: https://doi.org/10.18164/e8896575-1fb8-4e53-8acd-8579c3c055c2. Recommended citation: Environment and Climate Change Canada, [year published]. NH4 Wet Deposition Maps. Air Quality Research Division, Environment and Climate Change Canada, Toronto, Ontario, Canada. [URL/DOI], accessed [date].Recommended acknowledgement: The author(s) acknowledge Environment and Climate Change Canada for the provision of Canada-U.S. wet deposition kriging maps accessed from the Government of Canada Open Government Portal at open.canada.ca, and the data providers referenced therein.

Predicted cation exchange capacity (meq/100g) at a defined depth range (0–5 cm, 5–15 cm, 15–30 cm, 30–60 cm, 60–100 cm). The interchange of a cation in solution and another cation on the surface of any surface-active material such as clay colloid or organic colloid.

Ecodomains are areas broad climatic uniformity, defined at the global level

Significant climate change impacts are highly likely in all Canadian marine and freshwater basins, with effects increasing over time (DFO 2012). Climate models project that ecosystems and fisheries across Canada will be disrupted into the foreseeable future (Lotze et al. 2019; Bryndum-Buchholz et al. 2020; Tittensor et al. 2021; Boyce et al. 2024). Despite its imminence, climate change is infrequently factored into Canada’s primary marine conservation strategies, such as spatial planning (O’Regan et al. 2021) or fisheries management (Boyce et al. 2021; Pepin et al. 2022). The Climate Risk Index for Biodiversity (CRIB) was developed to assess climate risk for marine species in a quantitative, spatially explicit, and scalable manner, supporting climate-informed decision-making. It has been used to evaluate climate risks for marine life globally (Boyce et al. 2022), regionally (Lewis et al. 2023; Boyce et al. 2024; Keen et al. 2023), for fisheries (Boyce et al. 2024), and in support of spatial conservation planning (Keen et al. 2023). This dataset contains climate vulnerability and risk estimates from the CRIB framework adapted to consider warming at both the sea surface and its bottom for 145 marine species of conservation or fisheries interest across Canada’s marine territory. Climate risk is available at a 0.25-degree resolution under two contrasting emission scenarios to 2100. For each species, location, and scenario, 12 climate indexes, three vulnerability dimensions, and an overall vulnerability and risk score are provided. The accompanying report describes the data, methods, and workflow used to calculate risk. This report also guides the interpretation of these data to inform and support climate-informed decision-making in Canada.

Data describing clean growth and climate change projects that have received federal funding since 2015 that feeds into the Climate Action Map. The data include projects that meet Mitigation, Adaptation and Clean Technology objectives. The data include project names and descriptions, funding information, locations, and recipients.

The HOT2000 software contains monthly and annual climate data for 403 locations in Canada. Boundary lines for HOT2000 climate zones were defined through spatial interpolation of the annual Celsius heating degree-days for each weather station. In a number of instances, the positions of boundary lines may not be representative of the local climate conditions due to lack of appropriate climate data. Each HOT2000 climate zone contains one weather station to be used for all locations within the zone. Climate data represent 20-year averaged data from 1998 to 2017 for locations south of 58° latitude and 13-year averaged data from 2005 to 2017 for locations north of 58° latitude. Note that Whistler, BC uses 13 years of data.The following information is available in the climate map:o Location: the name of the weather station.o Region: the provincial or territorial location of the weather station.o Latitude: measured in degrees north of the equator.o Annual heating degree-days using a base of 18 °C.o Design heating dry bulb temperature (°C): the 2.5% January design temperature used to calculate the design heat loss for the house.o Design cooling dry bulb temperature (°C): the 2.5% July design temperature used to calculate the design cooling load for the house.o Design cooling wet bulb temperature (°C): the 2.5% July design temperature used to calculate the design cooling load for the house.The climate map is intended to be used by all users of the HOT2000 software under the EnerGuide Rating System, including energy advisors, service organizations, regulatory agencies, builders, utilities, and all levels of government.The weather locations and climate data are based on Environment and Climate Change Canada data, specifically the Canadian Weather Energy and Engineering Datasets (CWEEDS).

Bottom salinity time series at the 3 fixed stations and 46 stations, grouped into transects, of the Atlantic Zonal Monitoring Program (AZMP) under the Quebec region responsibility.The mean bottom salinity of the last ten years are displayed as 2 layers, one for the June survey (2014-2023, 2020 not sampled), another for the autumn survey (2014-2023). A third layer shows the positions of the fixed stations of the program (Anticosti Gyre, Gaspé Current and Rimouski).Each station is linked with a .png file showing the bottom salinity time series and with a .csv file containing all the bottom salinity data acquired at those stations since the beginning of the program sampling (columns : Station, Latitude, Longitude, Date(UTC), Sounding(m), Depth/Profondeur(m), Salinity/Salinité).PurposeThe Atlantic Zone Monitoring Program (AZMP) was implemented in 1998 with the aim of increasing the Department of Fisheries and Oceans Canada’s (DFO) capacity to detect, track and predict changes in the state and productivity of the marine environment.The AZMP collects data from a network of stations composed of high-frequency monitoring sites and cross-shelf sections in each following DFO region: Québec, Gulf, Maritimes and Newfoundland. The sampling design provides basic information on the natural variability in physical, chemical, and biological properties of the Northwest Atlantic continental shelf. Cross-shelf sections sampling provides detailed geographic information but is limited in a seasonal coverage while critically placed high-frequency monitoring sites complement the geography-based sampling by providing more detailed information on temporal changes in ecosystem properties.In Quebec region, two surveys (46 stations grouped into transects) are conducted every year, one in June and the other in autumn in the Estuary and Gulf of St. Lawrence. Historically, 3 fixed stations were sampled more frequently. One of these is the Rimouski station that still takes part of the program and is sampled about weekly throughout the summer and occasionally in the winter period.Annual reports (physical, biological and a Zonal Scientific Advice) are available from the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Devine, L., Scarratt, M., Plourde, S., Galbraith, P.S., Michaud, S., and Lehoux, C. 2017. Chemical and Biological Oceanographic Conditions in the Estuary and Gulf of St. Lawrence during 2015. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/034. v + 48 pp.Supplemental InformationThe bottom salinity is determined from CTD profile in the water column according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.

The SMTC map and database provides the location of, and information about completed, under construction, or planned mass timber projects and manufacturing facilities in Canada. Project information includes building size, height, occupancy, mass timber materials used, year of construction, and other criteria. Manufacturer information includes facility location, materials produced, and production capacity.

Ecodivisions are areas of broad climatic and physiographic uniformity, defined at the continental level.

Time series of dissolved inorganic nutrients (nitrate, silicate, phosphate) (mmol/m2) at the 3 fixed stations and 46 stations, grouped into transects, of the Atlantic Zonal Monitoring Program (AZMP) under the Quebec region responsibility.The mean integrated nutrient data of 2 strata (0-50 m) et (50-150 m) from the last ten years are displayed as 12 layers, 6 for the June survey (2013-2022, 2020 not sampled) and 6 for the autumn survey (2013-2022). Finally, 2 other layers shows the positions of the fixed stations of the program (Anticosti Gyre, Gaspé Current and Rimouski).Each station is linked with a .png file showing the time series of nutrients and with a .csv file containing all the integrated nutrient data acquired at those stations since the beginning of the program sampling (columns : Station, Latitude, Longitude, Date(UTC), Sounding(m), Depth_min/Profondeur_min(m), Depth_max/Profondeur_max(m), Integrated_Nitrate/Nitrate_intégré(mmol/m²), Integrated_Phosphate/Phosphate_intégré(mmol/m²), Integrated_Silicate/Silice_intégrée(mmol/m²)).PurposeThe Atlantic Zone Monitoring Program (AZMP) was implemented in 1998 with the aim of increasing the Department of Fisheries and Oceans Canada’s (DFO) capacity to detect, track and predict changes in the state and productivity of the marine environment.The AZMP collects data from a network of stations composed of high-frequency monitoring sites and cross-shelf sections in each following DFO region: Québec, Gulf, Maritimes and Newfoundland. The sampling design provides basic information on the natural variability in physical, chemical, and biological properties of the Northwest Atlantic continental shelf. Cross-shelf sections sampling provides detailed geographic information but is limited in a seasonal coverage while critically placed high-frequency monitoring sites complement the geography-based sampling by providing more detailed information on temporal changes in ecosystem properties.In Quebec region, two surveys (46 stations grouped into transects) are conducted every year, one in June and the other in autumn in the Estuary and Gulf of St. Lawrence. Historically, 3 fixed stations were sampled more frequently. One of these is the Rimouski station that still takes part of the program and is sampled about weekly throughout the summer and occasionally in the winter period.Annual reports (physical, biological and a Zonal Scientific Advice) are available from the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Devine, L., Scarratt, M., Plourde, S., Galbraith, P.S., Michaud, S., and Lehoux, C. 2017. Chemical and Biological Oceanographic Conditions in the Estuary and Gulf of St. Lawrence during 2015. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/034. v + 48 pp.Supplemental InformationWater sampling for nutrients analysis is done from Niskin bottles according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.