Data describing clean growth and climate change projects that have received federal funding since 2015 that feeds into the Climate Action Map. The data include projects that meet Mitigation, Adaptation and Clean Technology objectives. The data include project names and descriptions, funding information, locations, and recipients.

The HOT2000 software contains monthly and annual climate data for 403 locations in Canada. Boundary lines for HOT2000 climate zones were defined through spatial interpolation of the annual Celsius heating degree-days for each weather station. In a number of instances, the positions of boundary lines may not be representative of the local climate conditions due to lack of appropriate climate data. Each HOT2000 climate zone contains one weather station to be used for all locations within the zone. Climate data represent 20-year averaged data from 1998 to 2017 for locations south of 58° latitude and 13-year averaged data from 2005 to 2017 for locations north of 58° latitude. Note that Whistler, BC uses 13 years of data.The following information is available in the climate map:o Location: the name of the weather station.o Region: the provincial or territorial location of the weather station.o Latitude: measured in degrees north of the equator.o Annual heating degree-days using a base of 18 °C.o Design heating dry bulb temperature (°C): the 2.5% January design temperature used to calculate the design heat loss for the house.o Design cooling dry bulb temperature (°C): the 2.5% July design temperature used to calculate the design cooling load for the house.o Design cooling wet bulb temperature (°C): the 2.5% July design temperature used to calculate the design cooling load for the house.The climate map is intended to be used by all users of the HOT2000 software under the EnerGuide Rating System, including energy advisors, service organizations, regulatory agencies, builders, utilities, and all levels of government.The weather locations and climate data are based on Environment and Climate Change Canada data, specifically the Canadian Weather Energy and Engineering Datasets (CWEEDS).

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported to the NPRI in the most recent reporting year.The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, datasets are available in either CSV or XLS formats.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported direct releases to land to the NPRI. The data are for the most recent reporting year, by reported total quantities of these releases. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in a CSV format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported disposals and transfers to the NPRI in the most recent reporting year, by reported total quantities. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in an csv format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html

This 4th edition Plant Hardiness Zones map shows updated zones related to perennial plant survival in Canada. The map is based on a formula using seven climate variables that influence plant survival: 1. Monthly mean of the daily minimum temperatures of the coldest month. 2. Mean frost-free period above 0°C in days.3. Amount of rainfall from June to November.4. Monthly mean of the daily maximum temperatures of the warmest month. 5. A winter harshness index related to rainfall in January.6. Mean maximum snow depth.7. Maximum wind gust in 30 year period.The original map was developed by Agriculture and Agri-Food Canada in the early 1960s based on average climate values from 1930 to 1960. This new map uses 1991 to 2020 averages. The map shown to the left of this map shows an alternative plant hardiness zone approach using just one climate variable: average extreme minimum temperature for the period 1991 to 2020. This was originally developed by scientists at the United States Department of Agriculture (see https://www.usna.usda.gov/science/plant-hardiness-zone-map/). The development of these maps was made possible through a collaborative effort by scientists at Natural Resources Canada’s Canadian Forest Service, Environment Canada, and Agriculture and Agri-Food Canada. A paper describing the research, “Updated plant hardiness zones for Canada and assessment of change over time”, can be found in Scientific Reports, Vol. 15(1), 22774 ( https://doi.org/10.1038/s41598-025-00931-5).These maps were produced by the Canada Centre for Mapping and Earth Observation, Natural Resources Canada.To view an interactive version of this map and for more information on plant hardiness zones in Canada, please go to: https://www.planthardiness.gc.ca.

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported direct releases of Criteria Air Contaminants to the NPRI. The data are for the most recent reporting year, by reported total quantities of these releases. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in a CSV format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported direct releases to surface waters to the NPRI. The data are for the most recent reporting year, by reported total quantities of these releases. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in a CSV format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported releases to air (other than Criteria Air Contaminants (CAC)) to the NPRI. The data are for the most recent reporting year, by reported total quantities of these releases. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in a CSV format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html