This collection is a legacy product that is no longer supported. It may not meet current government standards.The Canadian Digital Elevation Model (CDEM) is part of Natural Resources Canada's altimetry system designed to better meet the users' needs for elevation data and products.The CDEM stems from the existing Canadian Digital Elevation Data (CDED). In these data, elevations can be either ground or reflective surface elevations.A CDEM mosaic can be obtained for a pre-defined or user-defined extent. The coverage and resolution of a mosaic varies according to latitude and to the extent of the requested area.Derived products such as slope, shaded relief and colour shaded relief maps can also be generated on demand by using the Geospatial-Data Extraction tool. Data can then be saved in many formats.The pre-packaged GeoTiff datasets are based on the National Topographic System of Canada (NTS) at the 1:250 000 scale; the NTS index file is available in the Resources section in many formats.

Digital Elevation Model (DEM) for British Columbia produced by GeoBC. This data is the TRIM DEM converted to the Canadian Digital Elevation Data (CDED)format. The data consists of an ordered array of ground or reflective surface elevations, recorded in metres, at regularly spaced intervals. The spacing of the grid points is .75 arc seconds north/south. The data was converted into 1:50,000 grids for distribution. The scale of this modified data is 1:250,000 which was captured from the original source data which was at a scale of 1:20,000. The CDED format specification are available at ftp://ftp.geogratis.gc.ca/pub/nrcan_rncan/elevation/cdem_mnec/doc/CDEM_product_specs.pdf

Our Imagery Base Maps and Mosaics of a number of Raster Datasets.  This includes the ASTER DEM, CDED and Shaded Relief Datasets.  As well as a number of mosaics, including SPOT, RapidEye, Landsat, and MVI Landcover data.

Coal Agreement feature class contains provincial extent polygon features representing Coal applications, agreements, leases, and licences, with varying term dates and conditions. These applications and subsequent agreements give the holder the right to explore Coal.

Administrative boundaries called mining divisions were once used for recording claims. This information is now historic. This dataset contains the codes for each of the 24 mining division. For example, 1=ALBERNI, 2=ATLIN, 3=CARIBOO, 4=CLINTON, 5=FORT STEELE. These boundaries are no longer used for current administration. Mining division is needed when submitting the title page for your Technical Work Report. More information on ARIS Reports (https://www2.gov.bc.ca/gov/content/industry/mineral-exploration-mining/british-columbia-geological-survey/assessmentreports/submissionmineral). They can also be used to reference historical records.

The spatial representation for a Natural Resource (NR) District, that is an administrative area established by the Ministry, within NR Regions.

Group of neighbouring municipalities joined together for the purposes of regional planning and managing common services (such as police or ambulance services). These groupings are established under laws in effect in certain provinces of Canada. Census division (CD) is the general term for provincially legislated areas (such as county, municipalité régionale de comté and regional district) or their equivalents. In other provinces and the territories where laws do not provide for such areas, Statistics Canada defines equivalent areas for statistical reporting purposes in cooperation with these provinces and territories. Census divisions are intermediate geographic areas between the province/territory level and the municipality (census subdivision).Census divisions (CD) have been established in provincial law to facilitate regional planning, as well as the provision of services that can be more effectively delivered on a scale larger than a municipality. In Newfoundland and Labrador, Manitoba, Saskatchewan, Alberta, Yukon, Northwest Territories and Nunavut, provincial or territorial law does not provide for these administrative geographic areas. Therefore, Statistics Canada, in cooperation with these provinces and territories, has created equivalent areas called CDs for the purpose of disseminating statistical data. In Yukon, the CD is equivalent to the entire territory.Next to provinces and territories, census divisions (CD) are the most stable administrative geographic areas, and are therefore often used in longitudinal analysis.

The purpose is to provide end users with a digital data representing the boundaries of incorporated municipalities in Manitoba. It also enables users of Manitoba spatial data to identify which municipality selected features fall within.This dataset is comprised of boundary geometry for all of the incorporated municipalities and Northern Affairs Communities within the Province of Manitoba.  The boundaries in this dataset represent the descriptions set forth in the Municipal Status and Boundaries Regulation (567/88R) and subsequent amendments, and regulations under The Northern Affairs Act.  The geospatial referencing of the Municipal Boundaries is based on the best available land parcel data for each municipality and Northern Affairs Community.  Where available, cadastral data based on registered survey plans was used.  Otherwise, the Manitoba Property Assessment Information dataset produced by Manitoba Municipal Relations was used.  The delineation of the boundaries was established according to the regulation establishing or amending the boundary of a municipality or Northern Affairs Community.  Dataset content is subject to:  Ongoing changes in municipal status and boundary and Northern Affairs Community boundary alterations that are generated through annexations, amalgamations, dissolutions or formations, all of which are approved by regulations made under The Municipal Act (for incorporated municipalities) and The Northern Affairs Act (for Northern Affairs Communities).  This dataset content is current to the most recent effective date of any such regulation amendment.   Ongoing development and maintenance of the land parcel datasets.  Improvements to the cadastral data are used to improve the positional accuracy of the municipal boundary polygons.   As of the publication date of this dataset the following known issues remain:  For municipal boundaries and Northern Affairs Communities that include water boundaries, such as in the Lake Winnipeg and Lake Manitoba areas the water boundary portion that best reflects the municipal boundary was used.     In some instances, road allowances on a municipal boundary are included in both of the adjoining municipalities.   Please visit the Manitoba Municipal Relations website for more information www.gov.mb.ca/mr/land_use_dev/index.html.   The Manitoba Municipal Boundaries data reflects the status of municipal boundaries and Northern Affairs Communities at the time of export and was uploaded to Manitoba Maps as a feature layer. Fields Included: OBJECTID: Sequential unique whole numbers that are automatically generated MUNI_NO: Manitoba municipality identifier number MUNI_NAME: Legal name of municipality MUNI_TYPE: Type of municipality MUNI_LIST_NAME: Name of municipality suitable for alphabetical list MUNI_LIST_NAME_WITH_TYPE: Name of municipality suitable for alphabetical list including type

Ministry of Transportation District Boundary is an exclusive area within a region that the Ministry organizational unit is responsible for. Each Ministry District is partitioned into one or more non-overlapping Contract Areas that cover the entire Ministry District

The Adjusted Precipitation data consist of monthly, seasonal and annual totals of daily adjusted rain, snow and total precipitation (millimetres) for 464 locations in Canada. Adjusted precipitation data incorporate adjustments (derived from comparison of instruments) to the original station data to account for discontinuities from non-climatic factors, such as instrument changes or station relocation. The time periods of the data vary by location, with the oldest data available from the early 1880s at some stations to the most recent update in 2017. Observations at co-located sites were sometimes joined in order to create longer time series. Data availability over most of the Canadian Arctic is restricted to the mid-1940s to present.