This dataset documents the infauna occurrences collected from 2021 to 2024 during the Canadian Beaufort Sea Marine Ecosystem Assessment (CBS-MEA) conducted by the Department of Fisheries and Oceans (DFO). This scientific program focuses on the integration of oceanography, food web linkages, physical-biological couplings, and spatial and interannual variabilities. The program also aims to expand the baseline coverage of species diversity, abundances, and habitat associations in previously unstudied areas of the Beaufort Sea and Western Canadian Archipelago. The study took place mainly in the Canadian Beaufort Sea and the Amundsen Gulf. Sampling is done along transects at fixed stations in the study area. Catches are collected using a 50 x 50 cm box-corer. Two or three box core are collected per station to obtain replicates. A total of 29 stations were sampled for infauna in 2021, 14 in 2022, 21 in 2023 and 24 in 2024 between 21-653 m depth. Half of the box corer (0.125 m2) is sampled for infauna taxonomy. The first 20 cm of sediment are collected and sieved through a 0.5 mm mesh sieve. The samples are preserved in seawater-formaldehyde solution (10 % v/v). In the lab, infauna is identified to the lowest taxon level possible.The data are presented in two files:The "endofaune_evenement_infauna_event_en" file which contains information about missions, stations and deployments, which are presented under a hierarchical activity structure.The "endofaune_occurrence_infauna_en" file that contains the taxonomic occurrences.

To support the surveillance of key macroalgae and non-indigenous species in Nova Scotia and New Brunswick, five quantitative PCR (qPCR) assays were designed and tested at 111 sites in 2022-2023 targeting the following non-indigenous macroalgal species: Antithamnion sparsum, Bonnemaisonia hamifera, Codium fragile, Dasysiphonia japonica, Fucus serratus. All assays were developed in 2022 by the Center for Environmental Genomics Applications (CEGA, Newfoundland, Canada) except Antithamnion sparsum, for which an assay was developed in 2023 by the Aquatic Biotechnology Laboratory (ABL) at the Bedford Institute of Oceanography. All amplification was performed by the ABL in 2022-2023. The assay developed for Fucus serratus was later determined to be non-specific, and amplifies both F. serratus and Fucus distichus.Cite this data as: Krumhansl K, Brooks C, Lowen B, DiBacco C, (2025). Quantitative PCR (qPCR) of Key Macroalgal Non-Indigenous Species in Nova Scotia and New Brunswick Waters. Version 1.5. Fisheries and Oceans Canada. Samplingevent dataset. https://ipt.iobis.org/obiscanada/resource?r=quantitative_qpcr_macroalgal_nonindigenous_species_novascotia_newbrunswick_2022_2023&v=1.5For additional information please see:LeBlanc F., Belliveau V., Watson E., Coomber C., Simard N., DiBacco C., Bernier R., Gagné N. 2020. Environment DNA (eDNA) detection of marine aquatic invasive species (AIS) in Eastern Canada using a targeted species-specific qPCR approach. Management of Biological Invasions 11(2):201-217Krumhansl K.A., Brooks C.M., Lowen B., O’Brien J., Wong M., DiBacco C. Loss, resilience and recovery of kelp forests in a region of rapid ocean warming. Annals of Botany 2024 Mar 8; 133(1):73-92Brooks C.M., Krumhansl K.A. 2023. First record of the Asian Antithamnion sparsum Tokida, 1932 (Ceramiales, Rhodophyta) in Nova Scotia, Canada. BioInvasions Records 12(3):745-725.

Facilities that separate and convert crude oil or other feedstock into liquid petroleum products, including upgraders and asphalt refineries.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

Benthic Marine Ecounits in coastal and offshore British Columbia. Benthic ecounits are intended to describe the sea bed and nearshore. Seven variables were selected to derive benthic ecounits: 1. Depth; 2. Slope; 3. Relief; 4. Temperature; 5. Exposure; 6. Current and 7. Substrate. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

The current and most detailed version of the approved corporate provincial digital Biogeoclimatic Ecosystem Classification (BEC) Zone/Subzone/Variant/Phase map (version 12, September 2, 2021). Use this version when performing GIS analysis regardless of scale. This mapping is deliberately extended across the ocean, lakes, glaciers, etc to facilitate intersection with a terrestrial landcover layer of your choice

A Culvert is a pipe (less than 3m in diameter) or half-round flume used to transport or drain water under or away from the road and/or right of way. Culverts that are greater than or equal to 3m in diameter are stored in the MoT Bridge Structure Road Dataset. It is a Point feature

Point layer of the registration points (centroids) of the evaluation units of the graphic matrix.**Collection context** Update provided by the evaluator or evaluation department.**Collection method** Computer-aided mapping.**Attributes*** `ID` (`integer`): Identifier* `ADM01A` (`varchar`): Municipality code* `SI0317A` (`smalldatetime`): Registration date* `SI0317B` (`integer`): Representation scale* `SI0317C` (`varchar`): Registration* `SI0317D` (`varchar`): Location* `SI0102C` (`varchar`): Section* `SI0103C` (`varchar`): Division* `UNIT_V` (`varchar`): Neighborhood unit* `NOTES` (`varchar`): Notes* `DATE_CREATION` (`smalldatetime`): Creation date* `DATE_MODIFICATION` (`smalldatetime`): Date of modification* `USER_MODIFICATION` (`varchar`): Modified byFor more information, consult the metadata on the Isogeo catalog (OpenCatalog link).**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Industrial sectors.attributs:ID - Unique identifierName - Industrial park name**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Grain size is the most fundamental physical property of sediment, and these data are widely used in a variety of applications in science. Marine expeditions of the Geological Survey of Canada have been collecting grain size information on seabed and sub-seabed samples for over 50 years. Results have been recorded at 5th phi midpoints since the early 1990's in contrast to the earlier full, half or quarter phi interval end point values. Users of high resolution data must note that the sum of %Silt and %Clay equals the total %Mud makeup and that %Gravel, %Sand, %Silt and %Clay sum to 100%. Summary statistics include percentages of gravel, sand, silt, clay and mud as well as mean, kurtosis, skewness and standard deviation. The quality of these data varies. Results should be used with some caution as they may not be fully representative of seabed grainsize, particularly in areas of sandy and coarser sediment (e.g., sand and mud can leak out of the sampler during recovery). Canada makes no representation or warranty of any kind with respect to the accuracy, usefulness, novelty, validity, scope, completeness or currency of the data and expressly disclaims any implied warranty of merchantability or fitness for a particular purpose of the data. For the purpose of the web mapping service, grain size data are sorted by the expedition id. Coarse and detailed grain size distribution plots are shown when a point is chosen. If the sample contains more that one sub-sample ( e.g., as with a piston core sequence), the grain size plots are stacked in the display window from the top of the core downwards.

The Marine Geoscience for Marine Spatial Planning (MGMSP) program, implemented byNatural Resources Canada (NRCan), is an initiative with the goal of offering innovativeregional geoscience products to support the Department of Fisheries and Oceans (DFO) intheir Marine Spatial Planning endeavors. To develop spatial management plans for variousexpansive bioregions across Canada, the DFO has undertaken the task of creatingcomprehensive ocean management strategies. Presently, the MGMSP program isconcentrating its efforts on two significant bioregions, namely the Scotian Shelf andNewfoundland and Labrador Shelves bioregions.In pursuit of this objective, the work presented in this report has focused on theassimilation and gridding of numerous disparate bathymetry datasets sourced fromauthoritative and reliable channels. The purpose of this comprehensive data gatheringapproach is to establish a unified bathymetric grid, with a consistent spatial resolution,which can be utilized in both oceanographic modeling and geological interpretation. Bycollating information from a diverse range of sources, we aim to create a comprehensiveand reliable foundation that will enable accurate and informed decision-making in the fieldof marine spatial planning, as well as enhance the accuracy and reliability of subsequentanalyses and simulations.