Updated 2025-02-21. Feature layer of current Boil Water Advisories issued for Public Water Systems (PWS) in Manitoba.Feature layer of current Boil Water Advisories issued for Public Water Systems (PWS) in Manitoba.

Mineral tenure layer with the boundaries of current mineral claims and mining leases.

This 'Current' spatial data layer is publicly viewable and downloadable, contains the most current Legal Old Growth Management Area (OGMA) polygons and excludes any sensitive information. This data represents legally established and spatially defined areas of old growth forest that are identified during landscape unit planning or an operational planning process. Forest licensees are required to maintain legally established OGMAs when preparing FSPs. OGMAs, in combination with other areas where forestry development is prevented or constrained, are used to achieve biodiversity targets. This spatial view will show the most current polygons and excludes sensitive information. This data is viewable in iMapBC by 2 layers: Legal Old Growth Management Areas - Current, Old Growth Management Areas - Legal. Please see the Additional Information and Object Description Comments below.

Location of flight lines of Yukon aerial photographs. Data was produced from heads up digitization of paper flight line index maps .Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Flood extent polygons from the current calendar year in selected Canadian regions that have been designated for observation, monitored by Natural Resources Canada using satellite imagery for emergency response. Coverage is not comprehensive nationwide. In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency geomatics services, may be activated by Canada’s emergency management protocols. As new satellite imagery becomes available, NRCan will extract flood extent polygons and update the dataset in near real time (4 hours). This item contains the flood products generated in the past year. For any data relating to previous years, please refer to the [Floods in Canada – Archive]( https://open.canada.ca/data/en/dataset/74144824-206e-4cea-9fb9-72925a128189) entry. Please note that the web mapping service may not display data if flood polygons have not been published by the EGS for the current year. The flood products generated are validated on a best effort basis. Various factors may affect the quality of the flood polygons. These factors include, but are not limited to, sensor type, image resolution, cloud cover or limitations of the flood polygon extraction method. In this layer, where possible, a symbology is applied to the flood polygons based on the underlying land use classification, or is simply unclassified and shows the raw flood extent. When using Web mapping services, to display a specific product, filter by date (UTC Date) and area of interest (AOI). Also, a link to download each product is available in the Resources section. This prepackaged and compressed product contains a Shape file, a PDF file and a KMZ file. Disclaimer : Emergency response authorities are the primary users of these satellite-derived open water flood extent map products. These products are generated to provide analysis and emergency response situational awareness and to facilitate decision-making during major flood events. The open water flood extent products are generated rapidly and limited time is available for editing and validation. The flood products reflect the open water flood conditions at the date/time of acquisition. While efforts are made to produce high quality products, near-real time products may contain errors due to the limited time available for vector editing and validation. Please note that current algorithms do not map flooded areas under the forest canopy and are not optimized for urban flood mapping. Limitation of Liability : Accordingly, the information contained on this website is provided on an “as is” basis and Natural Resources Canada makes no representations or warranties respecting the information, either expressed or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. Natural Resources Canada does not assume any liability in respect of any damage or loss based on the use of this website. In no event shall Natural Resources Canada be liable in any way for any direct, indirect, special, incidental, consequential, or other damages based on any use of this website or any other website to which this site is linked, including, without limitation, any lost profits or revenue or business interruption. Parent Collection:- **[Floods in Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/08b810c2-7c81-40f1-adb1-c32c8a2c9f50)**

Hillshade created from the Swift Current LiDAR Project 2009 – DEM. The hillshade provides a 3 D effect for the landscape covered by this project.

This data set comprises all of the current feature classes in the Alberta Provincial Electoral Divisions profiles. This data is derived from the 2021 Census of Canada.

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered validated data that has undergone quality control and quality assurance. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data.Download zip file. The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data from the Saskatchewan Ministry of Environment monitoring stations is validated and updated every quarter. This is the most up-to-date and accurate information available. A final annual review occurs in spring where data are subject to change. For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224 

This dataset includes commonly used socio-economic indicators by CSD (census subdivision). The feature classes were created from geosptial boundary files and tabular data related to the 2016 Census of Canada, Statistics Canada. The topics included are: Age groups and sex, core housing needs, dwelling types, Education, labour force, immigration, Income, knowledge of languages, lone parent family, mobility, housing tenure and visible minorities. This does not constitute an endorsement by Statistics Canada of this product.

Current conditions and forecasts for selected Canadian cities. Raw XML data are used to generate each city page on the Environment Canada web site https://www.weather.gc.ca/.