This publication contains thirteen (13) maps of different biogeochemical and soil properties of forest ecosystems of Canada’s managed forest. A scientific article gives additional details on the methodology: Paré, D., Manka, F., Barrette, J., Augustin, F., Beguin, J. 2021. Indicators of site sensitivity to the removal of forest harvest residues at the sub-continental scale: mapping, comparisons, and challenges. Ecol. Indicators. https://dx.doi.org/10.1016/j.ecolind.2021.107516

Changes in phytoplankton abundance and community composition have the potential to impact the entire food web and alter ecosystem productivity and biogeochemical cycles. Recognizing its importance, Fisheries and Oceans Canada (DFO) established a phytoplankton monitoring program on the Pacific coast of Canada based on phytoplankton pigment measurements.Phytoplankton pigments (chlorophylls and carotenoids) and ancillary data are collected annually on DFO cruises at multiple locations in waters of the northeast subarctic Pacific and the west coast of Canada. Water samples are collected at discrete depths in the upper layer and analyzed by high-performance liquid chromatography (HPLC).

Mean zooplankton biomass (g/m³) at the 46 stations grouped into Atlantic Zone Monitoring Program (AZMP) transects under Quebec region responsibility.Mean zooplankton wet weights of the last ten years are displayed as 4 layers in june (2013-2022, 2020 not sampled) and 4 layers in november (2013-2022). The 4 layers stand for total zooplankton, mesozooplankton, macrozooplankton and euphausiids. The attached files contain the biomass data: a .png file for each station, showing time series of biomass for the total zooplankton and the euphausiids, and a .csv file containing the data themselves (columns : Station,Date(UTC), Latitude, Longitude, Sounding(m), Depth_max/Profondeur_max(m), Depth_min/Profondeur_min(m), Mesozooplankton/Mésozooplancton(g/m³), Macrozooplankton/Macrozooplancton(g/m³), Zooplankton/Zooplancton(g/m³), Euphausiids/Euphausides(g/m³)).PurposeThe Atlantic Zone Monitoring Program (AZMP) was implemented in 1998 with the aim of increasing the Department of Fisheries and Oceans Canada’s (DFO) capacity to detect, track and predict changes in the state and productivity of the marine environment.The AZMP collects data from a network of stations composed of high-frequency monitoring sites and cross-shelf sections in each following DFO region: Québec, Gulf, Maritimes and Newfoundland. The sampling design provides basic information on the natural variability in physical, chemical, and biological properties of the Northwest Atlantic continental shelf. Cross-shelf sections sampling provides detailed geographic information but is limited in a seasonal coverage while critically placed high-frequency monitoring sites complement the geography-based sampling by providing more detailed information on temporal changes in ecosystem properties.In Quebec region, two surveys (46 stations grouped into transects) are conducted every year, one in June and the other in autumn in the Estuary and Gulf of St. Lawrence. Historically, 3 fixed stations were sampled more frequently. One of these is the Rimouski station that still takes part of the program and is sampled about weekly throughout the summer and occasionally in the winter period.Annual reports (physical, biological and a Zonal Scientific Advice) are available from the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Devine, L., Scarratt, M., Plourde, S., Galbraith, P.S., Michaud, S., and Lehoux, C. 2017. Chemical and Biological Oceanographic Conditions in the Estuary and Gulf of St. Lawrence during 2015. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/034. v + 48 pp.Supplemental InformationZooplankton is sampled by bottom-surface vertical net tow with a conic 202 µm net and preserved in a 4% solution of buffered formaldehyde according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.

The Shorezone Biobanding Lines are a linear representation of the various types of biota (flora and fauna) and their distribution, or lack thereof, found in the shoreunit.

Plankton (zooplankton and large phytoplankton) are collected using the Continuous Plankton Recorder (CPR) in the Northwest (NW) Atlantic along tracks transited by container ships from Reykjavik (Iceland) to St. John’s, NL (the Z line), and between St. John’s and the New England Coast, along the Scotian Shelf (the E and MD lines). The CPR Survey is the longest running, most geographically extensive marine ecological survey in the world, providing comparable data on the geographical distribution, seasonal cycles and year-to-year changes in abundance of plankton over a large spatial area. The first northwest Atlantic samples were collected in the Irminger Sea in 1957, and sampling was extended farther west to the Scotian Shelf a few years later. Sampling has continued to the present with some interruptions during the late 1970s and 1980s. Sampling is nominally once per month along the E, MD, and Z lines. DFO Sample collection and analysis are led by the Continuous Plankton Recorder Survey program at the Marine Biological Association of the UK. DFO provides partial support for the northwest Atlantic survey carried out on the E, MD, and Z lines and incorporates CPR data in Atlantic Zone Monitoring Program ocean environmental status reporting.

The purpose of this study was to characterize the kelp bed at Batture-aux-Alouettes, a preferred food source for the green sea urchin (Strongylocentrotus droebachiensis). The green urchin is fished commercially in Quebec and the fishing effort is concentrated on the Batture-aux-Alouettes near Tadoussac, at the mouth of the Saguenay Fjord. The study was conducted in two separate phases in 2018 and 2019. The main objective of this study was to determine the abundance and biomass of the kelp bed at Batture-aux-Alouettes. The first phase, using a stratified random sampling design, was conducted from August 21th to August 24th, 2018. Sampling of two 50 x 50 cm quadrats, separated by a distance of approximately 30 m, was conducted at eleven sites during twelve dives in the eastern section of the Batture-aux-Alouettes to collect kelp for biomass estimation and macroalgal species richness assessment. In the second phase, a total of 429 stations were first sampled between July 15 and 18, 2019 with a camera system dropped in two 50 x 50 cm quadrats. The presence or absence of kelp, percent macroalgal cover, and substrate type were assessed for each photo. As a result of this underwater photographic analysis, 129 of these stations were identified as having a presence of kelp and 88 of these stations had a presence of other algal species. To ensure equal representation of the different depth strata, the stations with kelp were divided into three depth categories: shallow (-1.7 m to 0 m), medium (0 m to 2 m) and deep (2 m to 5 m). Dives were conducted from August 13 to 15, 2019, at ten of these stations using a stratified random sampling design, taking care to ensure a balanced spatial distribution as well as an equal distribution of the different depth strata (four in the shallow, three in the medium, and two in the deep). Sampling of the 50 x 50 cm dive quadrat took place at three different distances spaced 5 m apart from a transect, i.e. at the 3 m (_3m), 8 m (_8m) and 13 m (_13m) mark. If there was little or no kelp in the quadrat, the quadrat sampling could be repeated for up to four quadrats per distance for a total area of 1 m². Two additional quadrats were conducted (_x) at two stations. Biomass assessment was also done via "cookie cutter" sampling (_CC). Divers took the same 50 x 50 cm quadrat and placed it on a selected (i.e., non-random) plot with 100% kelp cover.The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic information about the event, such as date and location. The "additional_information_event_and_occurrence" file includes sample size, protocol and sampling effort. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment of the kelp bed at Batture-aux-Alouettes, contact Rénald Belley (renald.belley@dfo-mpo.gc.ca).For quality control, the organisms were identified in the field fallowing the guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.

Zooplankton and ichthyoplankton data are archived in the Institute of Ocean Sciences (IOS) Zooplankton Database. The data available spans from 1980 to 2018 and is an extraction of vertical net hauls as biomass by major taxa collected during surveys conducted in the oceanic and coastal waters of the Northeast Pacific Ocean. The majority of vertical net hauls in this data set were collected from 10 metres above the sea floor or an approximate maximum depth of 250 metres. For further data requests, please use the contact information provided.

The purpose of the survey is to document and record habitat types and associated algae and marine invertebrate species in a variety of habitat types. Transect locations are randomly selected throughout the study area, which rotates between the north and south coasts of British Columbia on a biannual basis. Transects are laid perpendicular to the shoreline. A team of two divers swim the transect with data sheets to collect habitat, algae and marine invertebrate data as detailed below in the methods section. Data is keypunched in an MS Access database that can be queried for species observations and environmental information.This dataset includes three tables pulled from the original database containing observations by species, observations by quadrat, and additional header information for each observation. All three tables can be linked by the field HKey. Three lookup tables are included as well, one for algae, one for invertebrates, and one for substrates.

Yukon Bioclimate Zones and Subzones Version 1.0 is derived from a 30 m Digital Elevation Model (DEM) and a set of "rule-polygons". Each rule-polygon contains attributes that define upper and lower elevation limits of the bioclimate zone/subzone(s) that occur within the rule-polygon. Rule-polygon attributes and extent is defined by field data, expert observation and/or available imagery. Where available, rule-polygons were derived from plot data representative of climate (i.e. reference site). Yukon Bioclimate Zones and Subzones Version 1.0 may be used at scales larger than 1:250,000 with caution. This mapping is deliberately extended across the ocean, lakes, glaciers, etc to facilitate intersection with a terrestrial landcover layer of the user's choice. A map legend and map for this version is published in Southern Lakes Boreal Low Subzone (BOLsl): A Field Guide to Ecosite (Environment Yukon 2017). The Yukon Bioclimate Classification and Mapping project is ongoing, and subject to periodic updates or revisions. Because of this, the onus is on the end-user to ensure that they are using the most current version of the data. Although every effort has been made to ensure the correctness of the report and spatial products, there still may be errors. Please report errors in the data to the Custodian.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This spatial data identifies breeding zones used by forest managers and forest genetic associations to manage provincial forest genetic assets. The data: * shows the boundaries of breeding zones * identifies the primary or target species within each zone Species are associated with certain breeding programs, seed orchards and progeny (descendant) testing installations.