Hydrogeological Regions provide a framework to introduce the regional hydrogeology of Canada and to connect apparently disparate studies into a broader framework. The hydrological regions are first order areas used to capture and summarize data that will help develop more detailed profiles of each region. Comparison of findings within and between regions will allow scalable extension to sub-regional and watershed scale mapping.Canada has been classified into nine principal hydrogeological regions. Each region is described briefly based on the following five hydrogeological characteristics (Heath, 1984):system components and geometry;water-bearing openings;rock matrix composition;storage and transmission;recharge/ discharge.The hydrogeological classification emphasizes major geological provinces and rock formations. Fundamental water-bearing openings and rock matrix properties help determine the quantity (storage), flux (transmission), and composition of formation waters. These same properties and any overlying sediment cover affect recharge/ discharge rates for regional formations. While regional attributes are general, a simple aquifer mapping scheme can further describe the nature and character of aquifers in each region. For example, general groundwater settings across the country could be described as has been done by USGS principal aquifers [1]. Thus the regional framework can potentially link from national scales to watershed scales by identifying typical aquifer types based on readily available geological maps that use water-bearing character as a common attribute.The nine hydrogeological regions include:CordilleraMountains with thin sediment over fractured sedimentary, igneous and metamorphic rocks of Precambrian to Cenozoic age. Intermontane valleys are underlain by glacial and alluvial deposits of Pleistocene age.Plains (Western Sedimentary Basin)Region-wide basin of sub-horizontal Paleozoic to Cenozoic sedimentary rocks are overlain by thick glacial deposits filling buried valleys. Incised post-glacial valleys provide local relief. Shallow gas, coal, and brines may occur.Canadian ShieldUndulating region of thin glacial sediment overlying complex deformed, fractured PreCambrian igneous, metamorphic and sedimentary rocks. Region contains several terrains: sedimentary basins, structural belts, and glacial-lacustrine basins.Hudson Bay (Moose River) BasinSedimentary basin of Paleozoic to Mesozoic sub horizontal carbonate and clastic sediment covered by surficial deposits, with low relief and poor drainage.Southern OntarioEastern Great Lakes region is underlain by gently-dipping Paleozoic, carbonate, clastic and gypsum-salt strata overlain by glacial sediments up to 200 m thick with tunnel valleys. Karst, bedrock valleys, shallow gas and brines are also important components.St. Lawrence LowlandsLowlands underlain by shallow-dipping Paleozoic sedimentary rocks and thick glacial sediment in glacial-marine basins. Appalachian and Precambrian uplands discharge water to valleys. Shallow gas and saltwater intrusion are possible.AppalachiaUpland to mountainous region with thin surficial sediment on folded Paleozoic sedimentary and igneous rocks. Range of rock types yields a wide range of water compositions. Valleys contain important alluvial aquifers.Maritimes BasinLowlands with flat-lying, Carboniferous clastic , salt, and gypsum rocks contain shallow coal deposits. Surface glacial sediment is thin and discontinuous. Salt water intrusion is possible.PermafrostArctic islands and most areas north of 60o contain frozen ground affects on groundwater flow. Diverse topography and geology define sub-regions of sedimentary basins and crystalline rocks. Glacial sediment is thin, discontinuous; local peat accumulations are significant.

Historic placer mining areas in Yukon can be grouped into ten areas: Klondike; Sixtymile; Fortymile; Clear Creek; Moosehorn Range; Stewart River; Whitehorse South; Mayo; Dawson Range and Livingstone Creek. Each area has its own geomorphic setting and depositional history which is related to its glacial history. Several Quaternary glacial advances have been described in Yukon, and these are generally divided into three episodes, commonly known as the pre-Reid, Reid and McConnell, in order of oldest to most recent.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This layer contains polygon features that represent granular aggregate deposits in New Brunswick. ‘Granular Aggregate’ is the term used to describe naturally occurring deposits of sand and gravel formed during the last ice-age when glaciers were melting and receding. These important resources, which are used for infrastructure construction and maintenance.

This layer contains polygon features that represent granular aggregate deposits in New Brunswick. ‘Granular Aggregate’ is the term used to describe naturally occurring deposits of sand and gravel formed during the last ice-age when glaciers were melting and receding. These important resources, which are used for infrastructure construction and maintenance.

Annual and five-year (5YA) average wet deposition maps for the non-sea-salt sulfate ion are available. The file formats include geodatabase files (*.gdb) compatible with geospatial software (e.g. ESRI ArcGIS) and KMZ files compatible with virtual globe software (e.g. Google Earth™). Maps can also be viewed online via Open Maps and the ArcGIS online viewer. Annual deposition from each site was screened for completeness using the following criteria: (1) precipitation amounts were recorded for >90% of the year and >60% of each quarter, and (2) sulfate concentrations were reported for >70% of the precipitation measured over the year and for >60% of each quarter. Five-year average wet deposition values are averaged annual deposition values with a completeness criterion >60% for the five-year period. Units for wet deposition fluxes are in kg of xSO4 per hectare per year (kg ha-1 y-1). Sources of measurement data and spatial interpolation method are described here: https://doi.org/10.18164/e8896575-1fb8-4e53-8acd-8579c3c055c2. Recommended citation: Environment and Climate Change Canada, [year published]. xSO4 Wet Deposition Maps. Air Quality Research Division, Environment and Climate Change Canada, Toronto, Ontario, Canada. [URL/DOI], accessed [date].Recommended acknowledgement: The author(s) acknowledge Environment and Climate Change Canada for the provision of Canada-U.S. wet deposition kriging maps accessed from the Government of Canada Open Government Portal at open.canada.ca, and the data providers referenced therein.

Annual and five-year (5YA) average wet deposition maps for the nitrate ion are available. The file formats include geodatabase files (*.gdb) compatible with geospatial software (e.g. ESRI ArcGIS) and KMZ files compatible with virtual globe software (e.g. Google Earth™). Maps can also be viewed online via Open Maps and the ArcGIS online viewer. Annual deposition from each site was screened for completeness using the following criteria: (1) precipitation amounts were recorded for >90% of the year and >60% of each quarter, and (2) nitrate concentrations were reported for >70% of the precipitation measured over the year and for >60% of each quarter. Five-year average wet deposition values are averaged annual deposition values with a completeness criterion >60% for the five-year period. Units for wet deposition fluxes are in kg of NO3 per hectare per year (kg ha-1 y-1). Sources of measurement data and spatial interpolation method are described here: https://doi.org/10.18164/e8896575-1fb8-4e53-8acd-8579c3c055c2.Recommended citation: Environment and Climate Change Canada, [year published]. NO3 Wet Deposition Maps. Air Quality Research Division, Environment and Climate Change Canada, Toronto, Ontario, Canada. [URL/DOI], accessed [date].Recommended acknowledgement: The author(s) acknowledge Environment and Climate Change Canada for the provision of Canada-U.S. wet deposition kriging maps accessed from the Government of Canada Open Government Portal at open.canada.ca, and the data providers referenced therein.

Annual and five-year (5YA) average wet deposition maps for the ammonium ion are available. The file formats include geodatabase files (*.gdb) compatible with geospatial software (e.g. ESRI ArcGIS) and KMZ files compatible with virtual globe software (e.g. Google Earth™). Maps can also be viewed online via Open Maps and the ArcGIS online viewer. Annual deposition from each site was screened for completeness using the following criteria: (1) precipitation amounts were recorded for >90% of the year and >60% of each quarter, and (2) ammonium concentrations were reported for >70% of the precipitation measured over the year and for >60% of each quarter. Five-year average wet deposition values are averaged annual deposition values with a completeness criterion >60% for the five-year period. Units for wet deposition fluxes are in kg of NH4 per hectare per year (kg ha-1 y-1). Sources of measurement data and spatial interpolation method are described here: https://doi.org/10.18164/e8896575-1fb8-4e53-8acd-8579c3c055c2. Recommended citation: Environment and Climate Change Canada, [year published]. NH4 Wet Deposition Maps. Air Quality Research Division, Environment and Climate Change Canada, Toronto, Ontario, Canada. [URL/DOI], accessed [date].Recommended acknowledgement: The author(s) acknowledge Environment and Climate Change Canada for the provision of Canada-U.S. wet deposition kriging maps accessed from the Government of Canada Open Government Portal at open.canada.ca, and the data providers referenced therein.

Polygons that provide approximate indications on the location and outline of former quarries and surface deposits in Montreal.It complements the information provided on the [City Portal] (https://montreal.ca/sujets/anciennes-carrieres).**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Patterns of wet deposition of the nitrate (NO3), non-sea-salt sulfate (xSO4) and ammonium (NH4) ions across areas of Canada and the United States are based on measurements of precipitation depth and ion concentrations in precipitation samples. xSO4 refers to the wet deposition of sulfate with the sea-salt sulfate contribution removed at coastal sites. These measurements were collected and quality controlled by their respective networks: in Canada, the federal Canadian Air and Precipitation Monitoring Network (CAPMoN) and provincial or territorial networks in Alberta, New Brunswick, the Northwest Territories, Nova Scotia, Ontario and Quebec. In the United States, wet deposition measurements were made by two coordinated networks: the National Atmospheric Deposition Program (NADP) / National Trends Network (NTN) and the NADP/Atmospheric Integrated Research Monitoring Network (AIRMoN). Only data from sites that were designated as regionally representative were used in the mapping. Wet deposition amounts were interpolated by ordinary kriging using ArcMap Geostatistical Analyst. The map is limited to the contiguous U.S. and southeastern or southern Canada because outside that region, the interpolation error exceeds 30% due to the larger distances between stations. Links to annual and five-year average maps are available in the associated resources.

The Yukon GeologicalSurvey (YGS) has compiled over 195 surficial geology maps into a standardizedGIS format, providing approximately 80% coverage of the territory. The mapsrange in scales from 1:250,000 to 1:10,000 with spatial overlap between scales.The original maps were produced by various agencies, including the GeologicalSurvey of Canada, YGS, Yukon Government, universities, and the City ofWhitehorse.All original featuredescriptions have been preserved and also converted to standardized valuesusing the Yukon terrain classification system. The compilation includes 4 GISdatasets and supporting documents available for download via [YGS integrated data system](https://data.geology.gov.yk.ca/Compilation/33#InfoTab) (YGSIDS) or GeoYukon. A .lyr file is [provided](https://data.geology.gov.yk.ca/Compilation/33#InfoTab) to symbolize feature classes and differentiate overlapping maps atdifferent scales. Additionally, there is a surficial geology map index.The polygonattributes captured include surficial material, texture, age, surfaceexpression, and geomorphological processes.Line featuresinclude geological contacts, glacial limits, glacial landforms (cirques,arêtes, eskers, meltwater channels, moraines), and non-glacial landforms(faults, lineaments, landslides, escarpments).Point featuresinclude field station, fossil and sample locations, glacial landforms(erratics, kames, kettles, drumlins, flutings), permafrost features (pingos,palsas, patterned ground, thermokarst depressions), and other non-glaciallandforms (landslides, tors).The map indexprovides information on each map publication such as author, map title, mapscale, publisher.These data arevaluable for land-use applications in the territory, including: mineral andplacer exploration, geotechnical engineering, infrastructure planning, granularresource assessments, permafrost modeling, agricultural assessments, forestmanagement, and biophysical or ecological land classification.Distributed from GeoYukon by the Government of Yukon. Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)