Home /Search
Search datasets
We have found 37 datasets for the keyword " decoupage". You can continue exploring the search results in the list below.
Datasets: 105,252
Contributors: 42
Results
37 Datasets, Page 1 of 4
Bottom dissolved oxygen at the Atlantic Zone Monitoring Program (AZMP)-Quebec’s stations
Bottom dissolved oxygen time series at the 3 fixed stations and 46 stations, grouped into transects, of the Atlantic Zonal Monitoring Program (AZMP) under the Quebec region responsibility.The mean bottom dissolved oxygen of the last ten years are displayed as 2 layers, one for the June survey (2014-2023, 2020 not sampled), another for the autumn survey (2014-2023). A third layer shows the positions of the fixed stations of the program (Anticosti Gyre, Gaspé Current and Rimouski).Each station is linked with a .png file showing the bottom dissolved oxygen time series and with a .csv file containing all the bottom dissolved oxygen data acquired at those stations since the beginning of the program sampling (columns : Station, Latitude, Longitude, Date(UTC), Sounding(m), Depth/Profondeur(m), Dissolved_Oxygen/Oxygène_Dissous(%sat)).PurposeThe Atlantic Zone Monitoring Program (AZMP) was implemented in 1998 with the aim of increasing the Department of Fisheries and Oceans Canada’s (DFO) capacity to detect, track and predict changes in the state and productivity of the marine environment.The AZMP collects data from a network of stations composed of high-frequency monitoring sites and cross-shelf sections in each following DFO region: Québec, Gulf, Maritimes and Newfoundland. The sampling design provides basic information on the natural variability in physical, chemical, and biological properties of the Northwest Atlantic continental shelf. Cross-shelf sections sampling provides detailed geographic information but is limited in a seasonal coverage while critically placed high-frequency monitoring sites complement the geography-based sampling by providing more detailed information on temporal changes in ecosystem properties.In Quebec region, two surveys (46 stations grouped into transects) are conducted every year, one in June and the other in autumn in the Estuary and Gulf of St. Lawrence. Historically, 3 fixed stations were sampled more frequently. One of these is the Rimouski station that still takes part of the program and is sampled about weekly throughout the summer and occasionally in the winter period.Annual reports (physical, biological and a Zonal Scientific Advice) are available from the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Devine, L., Scarratt, M., Plourde, S., Galbraith, P.S., Michaud, S., and Lehoux, C. 2017. Chemical and Biological Oceanographic Conditions in the Estuary and Gulf of St. Lawrence during 2015. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/034. v + 48 pp.Supplemental InformationBottom dissolved oxygen is determined from CTD profile in the water column according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.
Automatically Extracted Buildings
“Automatically Extracted Buildings” is a raw digital product in vector format created by NRCan. The feature classes of this product delineate polygonal building footprints automatically extracted from airborne Lidar data, high-resolution optical imagery or other sources.The first feature class, Automatically Extracted Buildings by acquisition source, contains building footprints delivered according to the spatial extent of each source dataset used for extraction. When the spatial extents of acquisition sources overlap, footprints for the same building may therefore be duplicated in this class.The second feature class, Optimized Buildings Layer, is an assembled and harmonized layer derived from the buildings by acquisition source. Its objective is to provide a unique representation of each building footprint by removing duplicates and resolving overlaps between sources.
Combined Sewer Overflow volumes from wastewater systems subject to the Wastewater Systems Effluent Regulations
The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. The WSER require owners or operators of wastewater systems with combined sewers to submit an annual report on the total volume and the number of days wastewater is discharged per month via combined sewer overflow (CSO) points as a result of precipitation.The map below shows the volume of effluent (in cubic metres) discharged in a year from all CSO points situated within the collection area of a wastewater system. For the most part, the volumes provided to ECCC are estimates.Please note, a value of “999999999” in the dataset indicates that the volume data is unavailable and it does not mean that a volume of 999,999,999 m3 was released within the collection area of a wastewater system.The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either CSV or XLS formats.Data from QuebecAs of 2018, no combined sewer overflow volumes from Quebec municipalities are available since an equivalency agreement is now in effect.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater
Groundwater Recharge Rate, Groundwater Geoscience Program
In the hydrogeological unit, quantity of water that replenishes groundwater beneath the water table, expressed in mm/yr. Recharge is usually calculated using hydrology balance, integrating information from precipitation, hydrology data, drainage, soil properties, evapotranspiration, etc. The result is a raster dataset in which each cell has a given value for the recharge of the aquifer. It can be calculate using HELP software, developed by the US EPA. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset represent a raster in which each cell has a mean value describing the global annual recharge of the hydrogeological unit.
Municipal groundwater withdrawal protection area
Delimitation of protected areas for groundwater withdrawalsfor the territory of the City of Rouyn-Noranda**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
Combined Sewer Overflow points - Wastewater Systems Effluent Regulations
The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. The province of Quebec provided some combined sewer overflow data for 2020, which includes information on whether a discharge occurred at a combined sewer overflow point during the year. The map below shows the number of CSO points with at least one overflow event within each wastewater system. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either CSV or XLS formats.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater
Natural Gas Underground Storage - North American Cooperation on Energy Information
Sub-surface facilities used for storing natural gas. The facilities are usually hollowed-out salt domes, geological reservoirs (depleted oil or gas field) or water bearing sands (called aquifers) topped by an impermeable cap rock.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.
Ministry of Transportation (MOT) Storm Sewer
A Storm Sewer is an enclosed system of pipes or drains that divert water away from the road and/or right of way. Also includes culverts that run under enclosed ditches. It is a Linear feature
Ministry of Transportation (MOT) Drainage Appliance
A Drainage Appliance is an apparatus (that has not been described as a culvert), or earth works, designed to facilitate the movement of water in a controlled manner. Drainage Appliance include some appliances/earth works that work in conjunction with culverts. It is a Point feature
Deep water dissolved oxygen in the Estuary and Gulf of St.Lawrence
Deep water (> 200 m) dissolved oxygen interpolated on a grid cell of 10 km x10 km in the Estuary and Gulf of St. Lawrence. Input data are from the annual August multidisciplinary survey hold in 2014 to 2023.PurposeSince 1990, the Department of Fisheries and Oceans has been conducting an annual multidisciplinary survey in the Estuary and northern Gulf of St. Lawrence using a standardized protocol. These surveys are an important source of information about the status of the marine ressources. The objectives of the survey are multiple: to estimate the abundance and biomass of groundfish and invertebrates, to identify the spatial distribution and biological characteristics of these species, to monitor the biodiversity of the Estuary and the northern Gulf and finally, to describe the environmental conditions observed in August in the sampling area.Annual reports are available at the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Bourdages, H., Brassard, C., Desgagnés, M., Galbraith, P., Gauthier, J., Légaré, B., Nozères, C. and Parent, E. 2017. Preliminary results from the groundfish and shrimp multidisciplinary survey in August 2016 in the Estuary and northern Gulf of St. Lawrence. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/002. v + 87 p.Supplemental InformationThe bottom dissolved oxygen is determined from a CTD profile in the water column according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback