The daily mean is the average of all unit values for a given day.

The monthly mean is the average of daily mean values for a given month.

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys.   All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade poly features.  Examples include: * break walls * dams * rapids * shipwrecks [Technical Bulletin: Data migrated to new Ontario Hydro Network (OHN) - Hydrographic Feature Data Classes (PDF)](http://geo2.scholarsportal.info/proxy.html?http:__maps.scholarsportal.info/files/PDFS/public/OGDE/OHN/TB-OHN-PostMigration_101112.pdf)

Climate Normals and Averages are used to summarize or describe the average climatic conditions of a particular location. At the completion of each decade, Environment and Climate Change Canada updates its Climate Normals for as many locations and as many climatic characteristics as possible. The Climate Normals, Averages and Extremes offered here are based on Canadian climate stations with at least 15 years of data between 1981 to 2010.

Drought is a deficiency in precipitation over an extended period, usually a season or more, resulting in a water shortage that has adverse impacts on vegetation, animals and/or people. The Climate Moisture Index (CMI) was calculated as the difference between annual precipitation and potential evapotranspiration (PET) – the potential loss of water vapour from a landscape covered by vegetation. Positive CMI values indicate wet or moist conditions and show that precipitation is sufficient to sustain a closed-canopy forest. Negative CMI values indicate dry conditions that, at best, can support discontinuous parkland-type forests. The CMI is well suited to evaluating moisture conditions in dry regions such as the Prairie Provinces and has been used for other ecological studies.Mean annual potential evapotranspiration (PET) was estimated for 30-year periods using the modified Penman-Monteith formulation of Hogg (1997), based on monthly 10-km gridded temperature data. Data shown on maps are 30-year averages. Historical values of CMI (1981-2010) were created by averaging annual CMI calculated from interpolated monthly temperature and precipitation data produced from climate station records. Future values of CMI were projected from downscaled monthly values of temperature and precipitation simulated using the Canadian Earth System Model version 2 (CanESM2) for two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: mean annual Climate Moisture Index across Canada for a reference period (1981-2010).Reference: Hogg, E.H. 1997. Temporal scaling of moisture and the forest-grassland boundary in western Canada. Agricultural and Forest Meteorology 84,115–122.

High resolution forest change for Canada (Change Type) 1985-2011The forest change data included in this product is national in scope (entire forested ecosystem) and represents the first wall-to-wall characterization of wildfire and harvest in Canada at a spatial resolution commensurate with human impacts. The information outcomes represent 27 years of stand replacing change in Canada’s forests, derived from a single, consistent spatially-explicit data source, derived in a fully automated manner. This demonstrated capacity to characterize forests at a resolution that captures human impacts is key to establishing a baseline for detailed monitoring of forested ecosystems from management and science perspectives. Time series of Landsat data were used to characterize national trends in stand replacing forest disturbances caused by wildfire and harvest for the period 1985–2011 for Canada's 650 million hectare forested ecosystems (https://authors.elsevier.com/sd/article/S0034425717301360 ). Landsat data has a 30m spatial resolution, so the change information is highly detailed and is commensurate with that of human impacts. These data represent annual stand replacing forest changes. The stand replacing disturbances types labeled are wildfire and harvest, with lower confidence wildfire and harvest, also shared. The distinction and sharing of lower class membership likelihoods is to indicate to users that some change events were more difficult to allocate to a change type, but are generally found to be in the correct category. For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673).The data available is, 1. a binary change/no-change; 2. Change year; and, 3. Change type. When using this data, please cite as: White, J.C., M.A. Wulder, T. Hermosilla, N.C. Coops, and G. Hobart. (2017). A nationwide annual characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sensing of Environment. 192: 303-321. DOI: 10.1016/j.rse.2017.03.035. https://authors.elsevier.com/sd/article/S0034425717301360Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys.   All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade line features. Examples include: * break walls * dams * waterfalls * lock-gates * rapids * rocks * Sea Lamprey barriers * shipwrecks This product requires the use of geographic information system (GIS) software. [Technical Bulletin: Data migrated to new Ontario Hydro Network (OHN) - Hydrographic Feature Data Classes (PDF)](http://geo2.scholarsportal.info/proxy.html?http:__maps.scholarsportal.info/files/PDFS/public/OGDE/OHN/TB-HydrographicFeatureClasses_Implementation_100908.pdf)

Hydro Features is composed of the network of Canadian surface waters. Hydro Features entities are: Watercourse, Water Linear Flow, Hydro Obstacle (falls, rapids\...), Waterbody (lake, watercourse\...), Permanent Snow and Ice, Water Well, and Spring. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys. All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade point features. Examples include: * waterfalls * rapids * rocks * Sea Lamprey barriers * shipwrecks This product requires the use of geographic information system (GIS) software. [Technical Bulletin: Data migrated to new Ontario Hydro Network (OHN) - Hydrographic Feature Data Classes (PDF)](https://geohub.lio.gov.on.ca/datasets/mnrf::ontario-hydro-network-ohn-hydrographic-point/)

UTC - Utility and communication networks (utilitiesCommunication) Energy, water and waste systems, and communications infrastructure and services. For example, resources describing hydroelectricity; geothermal, solar, and nuclear sources of energy; water purification and distribution; sewage collection and disposal; electricity and gas distribution; data communication; telecommunication; radio; and communication networks.