Digitization of long-term water chemistry data collected between 1920's - 1990's from lakes across Saskatchewan by the Saskatchewan Fisheries Research Laboratory. Samples were collected using methods from the Standard Methods for the Examination of Water and Wastewater (APHA, AWWA and WPCF). This data serves as a baseline for water quality.This dataset is a digitization from paper records of water chemistry data across Saskatchewan collected by the Saskatchewan Fisheries Research Laboratory. Data ranges from the 1920's to the 1990's and were sampled using methodes from the Standard Methods for the Examination of Water and Wastewater (American Public Health Association, American Water Works Association and Water Pollution Control Facility) This long-term water chemistry data serves as a baseline for water quality. Different variables of water chemistry are organized into individual fields. The units of measurement appear at the end of each field name. Due to the historical nature of the data some uncertainty exist in values.  Additonal notes on data: ND: no detection Trace: trace amounts Nil: zero NA: no data 

Water wells where ground water quality samples were collected by the Naquadat Program between 1954 and 1980

The theme on physicochemical monitoring of rivers and rivers presents data from all stations in networks monitoring water quality in rivers in Quebec and the St. Lawrence River.The purpose of networks for monitoring general water quality is to characterize, using current physicochemical and bacteriological parameters, the quality of water in spatial terms and to monitor the evolution of this quality over time. For the regular monitoring of the general quality of river and river water, the parameters measured are: total phosphorus, total nitrogen, nitrites and nitrates, ammonia nitrogen, chlorophyll a, pheopigments, faecal coliforms, faecal coliforms, turbidity, suspended matter, pH, conductivity, dissolved organic carbon and temperature. This data is used to calculate the Bacteriological and Physicochemical Water Quality Index (IQBP), a water quality classification index.The data set on physicochemical monitoring of rivers and rivers also includes the drainage areas of some of the stations. The attribute table provides a compilation of land use by category for the last year available at the time the data was generated. Follow-up is carried out annually.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Get data about the water quality for Ontario's inland lakes. The data is collected through volunteer monitoring efforts – citizen science. The [Lake Partner environment map](https://www.ontario.ca/page/map-lake-partner) The Lake Partner Program (LPP) measures water quality in inland lakes across Ontario. This dataset provides water quality and water clarity data, as well as data on the concentrations of: * total phosphorus * calcium * chloride * sulphate Spatial information for lake monitoring locations across Ontario are also available. Keywords: Lake, Water, Citizen Science, Community Science, Volunteer, Phosphorus, Calcium, Chloride, Water Clarity

Water quality sample year information to be used in conjunction with CMI Water Quality Sampling Sites.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Multi-Watershed Nutrient Study collected stream water samples from 11 small agricultural watersheds between 2014 and 2020. Samples were collected during flow events like rainfall and snow melt, as well as during baseflow conditions across all four seasons. Samples were collected over the rise, peak, and fall of water during these events in the streams, to collect water chemistry information at a higher frequency than typical for stream water sampling. The dataset includes stream sensor data and flow data from stream monitoring stations, meteorological data from nearby weather stations, and water quality data collected through sampling. See Supplemental Information for station numbers and relevant information. Sample water quality parameters included total phosphorus, total filtered phosphorus, metals, total nitrogen, phosphate, dissolved nitrogen, turbidity, suspended solids, dissolved carbons, and sulphate. Data users are STRONGLY ENCOURAGED to review the associated Summary document prior to using this dataset. Six of the watersheds in the Multi-Watershed Nutrient Study were also sampled during the Pollution from Land Use Activities Reference Group (PLUARG) study conducted in the 1970s. More information on PLUARG can be found by visiting https://atrium.lib.uoguelph.ca/ and searching for PLUARG. High-Frequency water quantity data is provided courtesy of Water Survey of Canada/Government of Canada.

The Aquifer Vulnerability Index (AVI) is a method of assessing the vulnerability of aquifers to surface contaminants in Alberta. An aquifer is a geological formation that is permeable enough to transmit sufficient quantities of water to possible to support the development of water wells. In the assessment of aquifer vulnerability to potential contamination, the depth to the aquifer and the types of geological materials above them are considered. For example, aquifers closer to the surface overlain with pervious surface materials are more vulnerable to contaminants, as compared to aquifers found deeper and covered with a thick layer of impervious material. The AVI ratings indicate the potential of surficial materials to transmit water withy contaminants to the aquifer over a period of time. This data was created in 2002 using ArcGIS.

Existing flood protection works (dikes and bank protection) crest alignment in British Columbia. Updated from available Provincial dike crest survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, linework based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected linework for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf

Well capture zones are intended to identify potential areas of risk to aquifers where the release of contaminants could affect the water quality of community wells. The information was compiled as a discreet project under the 'Yukon Water Strategy' and represents a 'snapshot in time' of the Drinking Water Systems. Well capture zones were identified using a combination of buffers, analytical methods, and groundwater flow modelling using the Waterloo Hydrogeologic Inc. Visual MODFLOW.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Water quality in Canadian rivers indicators provide a measure of the ability of river water across Canada to support plants and animals. At each monitoring site, water quality data are compared to water quality guidelines to create a rating for the site. If measured water quality is below the guidelines, it can maintain a healthy ecosystem. Water quality at a monitoring site is considered excellent when substances in a river are very rarely measured above their guidelines. Conversely, water quality is rated poor when measurements are usually above their guidelines, sometimes by a wide margin. These indicators provide information about the state of surface water quality and its change through time, to support water resource management. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators - Home page:https://www.canada.ca/environmental-indicators