This data is intended to identify Canadian fresh waters which require additional measures (e.g., ballast water exchange and treatment) prior to release, as described in https://tc.canada.ca/en/marine-transportation/marine-safety/list-canada-s-designated-alternate-ballast-water-exchange-area-fresh-waters-tp-13617e-2021. The data is not intended for navigation purposes.According to Canada’s Ballast Water Regulations, vessels which are managing ballast water to meet the ballast water performance standard cannot release ballast water into fresh waters unless that ballast water was first exchanged in accordance with the ballast water exchange standard. For the purpose of this requirement, Canadian fresh waters are the following:- the waters at the Port of Kitimat and waters in or upstream of the Kitimat Arm, east of a line between Hilton Point and Steel Point;- the waters at the Port of Stewart and waters in or upstream of the Portland Canal, north of a line between Portland Point and Ramsden Point;- the waters of all Fraser River ports that are: -- east of Tilbury Island in the main arm of the Fraser River including Annacis Island and New Westminster docking areas; and -- east of the eastern tip of Mitchell Island in the north arm of Fraser River;- the waters of the Saguenay River ports and waters upstream of L’Anse-Creuse;- the waters of all St. Lawrence River ports and waters west of the east point of Ile d’Orléans including the port of Quebec City;- all Canadian waters of the Great Lakes Basin; and- the waters of Happy Valley-Goose Bay and waters of Lake Melville west of Rabbit Island.Legal Constraints: Users should be aware that the polygons depicting areas requiring additional measures to manage ballast water are intended for illustration only and should not be used for navigational or legal purposes.

The Great Lakes Migrant Waterfowl Surveys provide periodic data on waterfowl abundance, spatial and temporal distributions, and use along the shorelines of major water bodies and river systems in Ontario during mostly during spring and fall, and to a lesser extent during summer and winter, seasons. The primary survey area covers the shoreline and nearshore (~1km) waters of the Lower Great Lakes region of Ontario, specifically including the St. Lawrence River, Lake Ontario, Niagara River, Lake Erie, Detroit River and Lake St. Clair and associated major marshes and embayments. Aerial surveys, typically flown several times within spring (March –May: 1969, 1971, 1972, 1975 –1979, 1981, 1982, 1984 –1988, 1991 –1996, 1998 –2003 & 2009 –2011) and fall (September –December: 1968, 1970, 1971, 1974 –2003 & 2009 –2011) survey periods, have been conducted periodically on a relatively regular basis (approx. 5-10 years) along the Lower Great Lakes shorelines between 1968 and 2011. Smaller-scale surveys also have been conducted periodically during summer (June –August: 1968 –1970, 1972, 1974, 1975, 1977, 1982, 1984, 1986, 1989, 1999 & 2002) in this region. This survey often has been conducted in conjunction with the Midwinter Survey, so its data (up to 2004) also are included in the CWS Migrant Waterfowl Surveys database (Year ≥2004 & Month = January & February).Data from several aerial surveys conducted periodically during the non-breeding period outside the Lower Great Lakes region also are included in this database. Spring and fall surveys have been conducted along the shorelines and nearshore waters of the Upper Great Lakes region of Ontario, specifically at St. Clair River (Fall 2012 & 2013), Lake Huron (Fall 1973, 1996; Spring 1974) / Georgian Bay (Fall 1973, 1996, 2012 & 2013) & Lake Superior (Fall 2000). Aerial surveys also have been conducted inland in southeastern Ontario along the Rideau River (Fall 1998 & Spring 1999).

The contaminants in fish database is a compilation of contaminant data analysed from fish tissue at the Fresh Water Institute from 1970 to 2005. Data include lab number, region, analysis, organs, species, lake, form (whole fish, headon dressed, headless dressed), weight, and length and contaminant concentrations. Total mercury was the predominant contaminant measured. Results were expressed as ppm or ppb based on the parameter analyzed. Concentrations are expressed based on wet weight.

Province-wide spatial view showing licensed water sources (streams and lakes), under the Water Act, (current and historical), not captured (displayed) on TRIM base mapping (or Freshwater Atlas base mapping).

The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. Under the WSER, owners or operators of wastewater systems discharging annual average daily effluent volumes greater than 2,500 m3 are required to determine and report on the acute lethality of the effluent.The map below presents the percentage of acute lethality test failures for the wastewater systems in Canada that conducted at least one acute lethality test according to the standards of the Wastewater Systems Effluent Regulations. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either Excel or CSV formats.Data from Quebec and YukonAs of 2018, no acute lethality results from Quebec municipalities are available since an equivalency agreement is now in effect. As of 2015, no acute lethality test results for wastewater systems in the Yukon are available as an equivalency agreement in is effect.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater

The locations of coastal ferry routes in British Columbia. This includes ferries in coastal waters like BC Ferries, barges, water taxis, etc. but does not include freshwater ferries on inland rivers or lakes.

Linear coastlines of BC, including mainland and marine islands. Lines are directionalized and connected. Attributes include a hierarchical key and route identifier

Glaciers and ice masses for the province, derived from aerial imagery flown in the late 1980s and early 1990s. Please refer to the [Glaciers](https://catalogue.data.gov.bc.ca/dataset/glaciers) dataset for recent glacier extents in British Columbia, and [Historical Glaciers](https://catalogue.data.gov.bc.ca/dataset/historical-glaciers) for a comparable historic view.

The Maritimes Region is divided into seven Clam Harvesting Areas (CHA).CLAM HARVESTING AREA 1 is described as follows:The inland and tidal waters of the counties of Colchester, Cumberland and Hants that border and flow into the Bay of Fundy.CLAM HARVESTING AREA 2 is described as follows:The inland and tidal waters of the counties of Annapolis, Digby and Kings.CLAM HARVESTING AREA 3 is described as follows:The inland and tidal waters of Yarmouth County.Time restrictions for Clam Harvesting Area 3: No person shall fish for clams from sunset each Saturday until sunrise on the following Monday (closed Sundays) in the boundaries of Clam Harvesting Area 3.CLAM HARVESTING AREA 4 is described as follows:The inland and tidal waters of the counties of Shelburne, Queens and Lunenburg and that portion of Halifax County west of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 5 is described as follows:The inland and tidal waters of Guysborough County and that portion of Halifax County east of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 6 is described as follows:The inland and tidal waters of the counties of Richmond and Cape Breton, all of Victoria County except that portion between Cape North and Inverness County and that portion of Inverness County that borders on the Bras d'Or Lakes.NEW BRUNSWICK - BAY OF FUNDY CLAM HARVESTING AREA 7 is described as follows:The inland and tidal waters of the counties of Charlotte, Saint John and Albert that flow into the Bay of Fundy.

Water obstacles (rapids, falls, etc)