A compendium of reports that provide information about aquatic and terrestrial animals and plants, soils, surface water, groundwater and their accompanying data files and maps

This data record contains four digitized maps recreated from an original report entitled An Ecological Sketch of Some Fundy Fisheries published by the Conservation Council of New Brunswick. The selected maps summaries information obtained from active and retired fishermen, combined with a survey of the scientific and historical information. They illustrate knowledge on spawning, migration, and nursery grounds for herring and other fisheries for Grand Manan, Bay of Fundy, and Gulf of Maine.Cite this data as: Coon, D. 1999. An Ecological Sketch of Some Fundy Fisheries. Conservation Council of New Brunswick, Fredericton, NB. 32 pp. Published: June 2026. Coastal Ecosystems Science Division, Maritimes Region, Fisheries and Oceans Canada, Dartmouth NShttps://open.canada.ca/data/en/dataset/d09eee14-4786-4787-a596-9ddec1ad9342

Zebra Mussel (Dreissena polymorpha) and Quagga Mussel (Dreissena rostriformis bugensis) have a long history of invasion in European and North American freshwater ecosystems, with significant ecological and economic impacts. An ecological risk assessment for these two invasive species for freshwater ecosystems in Canada was completed in April 2022 with the aim to provide science-based guidance to inform management decisions and actions. These include early detection, response planning, and/or regulatory and policy measures aimed at mitigating the potential spread and risk posed by Zebra and Quagga Mussels to Canadian freshwater ecosystems (DFO 2023). The Potential for Introduction (propagule pressure and connectivity), the Potential for Establishment (habitat suitability, including a Calcium-based and Maximum Entropy (MaxEnt)-based model), the Potential for Invasion, and the Ecological Impacts were used to derive Ecological Risk for Zebra and Quagga Mussels in Canada. This assessment did not evaluate the risk to individual waterbodies but rather was conducted at a 9,260 m x 9,260 m grid cell resolution. These high resolution maps are provided here. Maps of Ecological Risk at the sub-drainage level are also provided. Fisheries and Oceans Canada is not responsible for any omissions or errors that may be contained in this dataset and shall not be liable for any losses, financial or otherwise, due to the use of these data. Please credit Wilcox et al. 2024 as the source of the data in any maps, reports, or articles that are printed or published on paper or the Internet.

Amalgamations of Wildlife Management Units which share similar ecological characteristics and hunter harvest patterns, and thus provide a suitable geographical framework for implementing population management strategies

Bivalve aquaculture has direct and indirect effects on plankton communities, which are highly sensitive to short-term (seasonal, interannual) and long-term climate changes, although how these dynamics alter aquaculture ecosystem interactions is poorly understood. Here, we investigate seasonal patterns in plankton abundance and community structure spanning several size fractions from 0.2 µm up to 5 mm, in a deep aquaculture embayment in northeast Newfoundland, Canada. Using flow cytometry and FlowCam imaging, we observed a clear seasonal relationship between fraction sizes driven by water column stratification (freshwater input, nutrient availability, light availability, water temperature). Plankton abundance decreased proportionally with increasing size fraction, aligning with size spectra theory. Within the bay, greater mesozooplankton abundance, and a greater relative abundance of copepods, was observed closest to the aquaculture lease. No significant spatial effect was observed for phytoplankton composition. While the months of August to October showed statistically similar plankton composition and size spectra slopes (i.e., food chain efficiency) and could be used for interannual variability comparisons of plankton composition, sampling for longer periods could capture long-term phenological shifts in plankton abundance and composition related to various processes, including climate change. Conclusions provide guidance on optimal sampling to monitor and assess aquaculture pathways of effects.Cite this data as: Sharpe H, Lacoursière-Roussel A, Gallardi D (2024). Ecological insight of seasonal plankton succession to monitor shellfish aquaculture ecosystem interactions. Version 3.2. Fisheries and Oceans Canada. Sampling event dataset. https://doi.org/10.25607/2ujdvh

The datasets contain land surface evapotranspiration (ET, in mm of H2O) for Canada's landmass at a spatial resolution of 5-km and temporal intervals of a month and a year over a 24-year period of 2000-2023. The ET was produced by the Land Surface Model EALCO (Ecological Assimilation of Land and Climate Observations) developed at Natural Resources Canada. The EALCO model was run at a 30-minute time step. The monthly (or annual) ET in the datasets is the sum of the 30-minute ET values in a month (or a year). Dew and frost formations simulated by EALCO are included in the ET as negative values, so the ET represents the net water flux between land surface and the atmosphere. Details of the datasets and the EALCO ET modelling algorithms can be found in Wang (2007, Simulation of Evapotranspiration and Its Response to Plant Water and CO2 Transfer Dynamics. J. Hydrometeorology, 9, 426-443, doi: 10.1175/2007JHM918.1) and Wang et al. (2013, Spatial and seasonal variations in evapotranspiration over Canada’s landmass. Hydrol. Earth Syst. Sci., 17, 3561–3575, doi:10.5194/hess-17-3561-2013).

This dataset provides wall-to-wall maps of forest structure across Canada's 650 million hectare forested ecosystems for the year 2022, generated at a spatial resolution of 30 m.It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Structure estimates include key attributes such as canopy height, canopy cover, and aboveground biomass, derived using a combination of airborne lidar and Landsat-based spectral composites. Structure models were trained using the - lidar-plot framework - (Wulder et al. 2012), which integrates co-located airborne lidar data and ground plot measurements with Landsat time-series composites (Hermosilla et al. 2016). A Nearest Neighbour imputation approach was applied to estimate structural attributes across the full extent of Canada's forested area. These nationally consistent products are intended to support strategic-level forest monitoring and assessment and are not designed for operational forest management.For further details on the methods, accuracy assessment, and source data, see Matasci et al. (2018).Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment, 216, 697-714. https://doi.org/10.1016/j.rse.2018.07.024 (Matasci et al. 2018)

The RVI/CVI database is derived from the CanEcumene 3.0 GDB (Eddy, et. al. 2023) using a selection of socio-economic variables identified in Eddy and Dort (2011) that aim to capture the overall state of socio-economic conditions of communities as ‘human habitats’. This dataset was developed primarily for application in mapping socio-economic conditions of communities and regions for environmental and natural resource management, climate change adaptation, Impact Assessments (IAs) and Regional Assessments (RAs), and Cumulative Effects Assessment (CEA).The RVI/CVI is comprised of five sub-indicators: 1) population change, 2) age structure, 3) education levels, 4) employment levels, and 5) real estate values. Index values are based on percentile ranks of each sub-indicator, and averaged for each community, and for three ranked groups: 1) all of Canada, 2) by province, and 3) by population size. The data covers the Census periods of 2001, 2006, 2011 (NHS), 2016, and 2021.The index is mapped in two ways: 1) as ‘points’ for individual communities (CVI), and 2) as ‘rasters’ for spatial interpolation of point data (RVI). These formats provide an alternative spatial framework to conventional StatsCan CSD framework. (For more information on this approach see Eddy, et. al. 2020).============================================================================================Eddy, B.G., Muggridge, M., LeBlanc, R., Osmond, J., Kean, C., and Boyd, E. 2023. The CanEcumene 3.0 GIS Database. Federal Geospatial Platform (FGP), Natural Resources Canada. https://gcgeo.gc.ca/viz/index-en.html?keys=draft-3f599fcb-8d77-4dbb-8b1e-d3f27f932a4bEddy B.G., Muggridge M, LeBlanc R, Osmond J, Kean C, Boyd E. 2020. An Ecological Approach for Mapping Socio-Economic Data in Support of Ecosystems Analysis: Examples in Mapping Canada’s Forest Ecumene. One Ecosystem 5: e55881. https://doi.org/10.3897/oneeco.5.e55881Eddy, B.G.; Dort, A. 2011. Integrating Socio-Economic Data for Integrated Land Management (ILM): Examples from the Humber River Basin, western Newfoundland. Geomatica, Vol. 65, No. 3, p. 283-291. doi:10.5623/cig2011-044.

From 1986 to 2000, a major ecological inventory program was carried out in the forests of southern Quebec in order to describe the diversity of forest ecosystems. In total, **28,425 ecological observation points (POE) ** were established on a territory covering 760,000 km2, located between 45° and 53° N latitude and 57° and 80° W longitude. The POE is a circular sampling unit that covers an area of 400 m². It collects data on the characteristics of forest stand (composition, structure), soil (texture, deposit, drainage), and topography, as well as location information. The coverage of each plant species in the plot is estimated visually. A detailed description of a soil profile is available in approximately 35% of POEs. The ecological classification elements of POEs (groups of indicator species, forest types, potential vegetation, ecological types, etc.) are determined using computerized identification keys using data on vegetation and the physical environment. The criteria used for this ecological classification are those presented in the guides for the recognition of ecological types. **The levels of the ecological classification system of the territory are also determined for each POE. ** **This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The B.C. Conservation Data Centre’s spatial view of publicly available, known locations of species and ecological communities at risk. This spatial view is split into the "Publicly Available Occurrences" layer and "(Extirpated and Historical) Publicly Available Occurrences" layer. The Extirpated and Historical layer includes element occurrences that have a last observation date greater than 40 years ago and element occurrences that are extirpated due to general habitat loss or degradation of the environment in the area. Use the field ‘Rank Description’ to differentiate between Historical and Extirpated element occurrences in this layer. All element occurrences are polygons: the size of the polygon usually reflects the locational uncertainty associated with the source data, represented with varying sized circles. Some polygons may be larger to reflect the actual area covered by the element occurrence. The field "Representational Accuracy" is used to communicate how accurately the polygon reflects the actual area covered by the element. If you do not find an element occurrence in your area of interest, this means there are none currently mapped in the CDC database. The best way to verify whether an area contains a species or ecosystem at risk is to have do a detailed assessment of the property during the appropriate season.