Curie point depth (CPD) mapping in Yukon was done using public domain aeromagnetic data from Natural Resources Canada. In this study, two different CPD methodologies were employed using two different window sizes (200 km and 300 km). Qualitatively, the results were broadly consistent regardless of the method or window size. South-central Yukon exhibits shallow CPD values while northern and southeastern Yukon have deeper CPD values. This suggests that south-central Yukon has higher levels of heat flow in the mid-to-lower crust compared to the rest of the territory. The CPD results are largely consistent with heat flow measurements from the near surface. Specifically, regions with shallow CPD estimates correspond to areas with elevated heat flow measurements. Geologically, the regions with shallow CPD correspond to the Cordillera, while deep CPD areas appear to be co-located with continental platform rocks of Ancestral North America. Comparison with Yukon-specific crustal geotherms derived from other data suggest that the CPD estimates for south-central Yukon are systematically too deep by 2 to 12 km. The discrepancy is likely caused by the need to better understand and account for the fractal distribution of magnetization in the crust in Yukon. The results of this CPD study are valuable in that 95% of Yukon has been demarcated into regions of shallow CPD (higher heat flow) and deep CPD (lower heat flow). These findings should be combined with other data, such as heat generation and sediment thickness estimates, to identify the most prospective regions of elevated subsurface heat in Yukon. Contours have been created for the gridded curie point depth at 1 km intervals and are presented along with the grid.Distributed from [GeoYukon](https://mapservices.gov.yk.ca/GeoYukon/) by the [Government of Yukon](https://yukon.ca/) . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Curie point depth (CPD) mapping in Yukon was done using public domain aeromagnetic data from Natural Resources Canada. In this study, two different CPD methodologies were employed using two different window sizes (200 km and 300 km). Qualitatively, the results were broadly consistent regardless of the method or window size. South-central Yukon exhibits shallow CPD values while northern and southeastern Yukon have deeper CPD values. This suggests that south-central Yukon has higher levels of heat flow in the mid-to-lower crust compared to the rest of the territory. The CPD results are largely consistent with heat flow measurements from the near surface. Specifically, regions with shallow CPD estimates correspond to areas with elevated heat flow measurements. Geologically, the regions with shallow CPD correspond to the Cordillera, while deep CPD areas appear to be co-located with continental platform rocks of Ancestral North America. Comparison with Yukon-specific crustal geotherms derived from other data suggest that the CPD estimates for south-central Yukon are systematically too deep by 2 to 12 km. The discrepancy is likely caused by the need to better understand and account for the fractal distribution of magnetization in the crust in Yukon. The results of this CPD study are valuable in that 95% of Yukon has been demarcated into regions of shallow CPD (higher heat flow) and deep CPD (lower heat flow). These findings should be combined with other data, such as heat generation and sediment thickness estimates, to identify the most prospective regions of elevated subsurface heat in Yukon. Contours have been created for the gridded curie point depth at 1 km intervals and are presented along with the grid.Distributed from [GeoYukon](https://mapservices.gov.yk.ca/GeoYukon/) by the [Government of Yukon](https://yukon.ca/) . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater depth is measured on the field, using a water level meters. The depth is then subtracted from the elevation of the measurement site to obtain the water level elevation. The dataset is a general description of the measurement site including location and well elevation. It features a series of points of the surface elevation of the groundwater body.

Elevation - Elevation derived product. For example such as Canvec Contours, NWT NTDB Contours, Spot Elevations and MVAP Contours

Forest Elevation(Ht) Mean 2015Mean height of lidar first returns (m). Represents the mean canopy height. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018) Wulder et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

A spot height identifies the elevation (z value) above sea level of natural and man-made geographic features. It includes: * spot heights * vertical control points * water level/lake elevations This product requires the use of geographic information system (GIS) software.

Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Groups are the second coarsest level of the Coal Grid and approximate 1:50,000 NTS map sheets. E.G. 103J08

This dataset provides geospatial polygon boundaries for marine bivalve shellfish harvest area classification in Canada (British Columbia, New Brunswick, Newfoundland and Labrador, Nova Scotia, Prince Edward Island and Quebec). These data represent the five classification categories of marine bivalve shellfish harvest areas (Approved; Conditionally Approved; Restricted; Conditionally Restricted; and Prohibited) under the Canadian Shellfish Sanitation Program (CSSP). Data are collected by Environment and Climate Change Canada (ECCC) for the purpose of making applicable classification recommendations based on pollution source assessment and water quality survey results. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO). These geographic data are for illustrative purposes only; they show shellfish harvest area classifications that may be superseded at any time by regulatory orders issued by DFO, which place areas in Closed Status, due to conditions such as sewage overflows or elevated biotoxin levels. For further information about the current status and boundary coordinates for areas under Prohibition Order, please contact your local DFO office.

This dataset provides geospatial polygon boundaries for marine bivalve shellfish harvest area classification in New Brunswick, Canada. These data represent the five classification categories of marine bivalve shellfish harvest areas (Approved; Conditionally Approved; Restricted; Conditionally Restricted; and Prohibited) under the Canadian Shellfish Sanitation Program (CSSP). Data are collected by Environment and Climate Change Canada (ECCC) for the purpose of making applicable classification recommendations on the basis of sanitary and water quality survey results. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO). These geographic data are for illustrative purposes only; they show shellfish harvest area classifications when in Open Status. The classification may be superseded at any time by regulatory orders issued by DFO, which place areas in Closed Status, due to conditions such as sewage overflows or elevated biotoxin levels. For further information about the current status and boundary coordinates for areas under Prohibition Order, please contact your local DFO office.This dataset is 'Deprecated'. Please use updated source here.https://open.canada.ca/data/en/dataset/7aef69b5-3aaf-4d50-bb86-083031e6dc47

This dataset provides geospatial polygon boundaries for marine bivalve shellfish harvest area classification in Quebec, Canada. These data represent the five classification categories of marine bivalve shellfish harvest areas (Approved; Conditionally Approved; Restricted; Conditionally Restricted; and Prohibited) under the Canadian Shellfish Sanitation Program (CSSP). Data are collected by Environment and Climate Change Canada (ECCC) for the purpose of making applicable classification recommendations on the basis of sanitary and water quality survey results. ECCC recommendations are reviewed and adopted by Regional Interdepartmental Shellfish Committees prior to regulatory implementation by Fisheries and Oceans Canada (DFO). These geographic data are for illustrative purposes only; they show shellfish harvest area classifications when in Open Status. The classification may be superseded at any time by regulatory orders issued by DFO, which place areas in Closed Status, due to conditions such as sewage overflows or elevated biotoxin levels. For further information about the current status and boundary coordinates for areas under Prohibition Order, please contact your local DFO office.This dataset is 'Deprecated'. Please use updated source here.https://open.canada.ca/data/en/dataset/7aef69b5-3aaf-4d50-bb86-083031e6dc47