This Web Map Service depicts the location of clean electricity generating facilities by type of clean energy source and power generation capacity. Clean energy sources shown on the map include biomass, hydro, nuclear, solar, tidal and wind. The data comes from the provinces and territories, other federal departments and clean energy associations in Canada. The service is one of many themes mapped in the web mapping application Map of Clean Energy Resources and Projects (CERP) in Canada.

Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical into electric energy with an installed capacity of 1 Megawatt or more generated from renewable energy, including biomass, hydroelectric, pumped-storage hydroelectric, geothermal, solar, and wind.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)

Facilities are an oil and gas activity, defined in the Energy Resources Activities Act as a system of vessels, piping, valves, tanks and other equipment used to gather, process, measure, store or dispose of petroleum, natural gas, water or a substance referred to in paragraph (d) or (e) of the definition of pipeline. This dataset contains point features for proposed applications collected through the BC Energy Regulator's Application Management System (AMS). This dataset is updated nightly.

Facilities that separate and convert crude oil or other feedstock into liquid petroleum products, including upgraders and asphalt refineries.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

The HOT2000 software contains monthly and annual climate data for 403 locations in Canada. Boundary lines for HOT2000 climate zones were defined through spatial interpolation of the annual Celsius heating degree-days for each weather station. In a number of instances, the positions of boundary lines may not be representative of the local climate conditions due to lack of appropriate climate data. Each HOT2000 climate zone contains one weather station to be used for all locations within the zone. Climate data represent 20-year averaged data from 1998 to 2017 for locations south of 58° latitude and 13-year averaged data from 2005 to 2017 for locations north of 58° latitude. Note that Whistler, BC uses 13 years of data.The following information is available in the climate map:o Location: the name of the weather station.o Region: the provincial or territorial location of the weather station.o Latitude: measured in degrees north of the equator.o Annual heating degree-days using a base of 18 °C.o Design heating dry bulb temperature (°C): the 2.5% January design temperature used to calculate the design heat loss for the house.o Design cooling dry bulb temperature (°C): the 2.5% July design temperature used to calculate the design cooling load for the house.o Design cooling wet bulb temperature (°C): the 2.5% July design temperature used to calculate the design cooling load for the house.The climate map is intended to be used by all users of the HOT2000 software under the EnerGuide Rating System, including energy advisors, service organizations, regulatory agencies, builders, utilities, and all levels of government.The weather locations and climate data are based on Environment and Climate Change Canada data, specifically the Canadian Weather Energy and Engineering Datasets (CWEEDS).

Applications for the surface location of a well associated with oil and gas activity. This dataset contains point features for proposed applications collected through the BC Energy Regulator's Application Management System (AMS). This dataset is updated nightly

Applications for land authorizations representing the road right of way for road activities. This dataset contains polygon features for proposed applications collected through the BC Energy Regulator's Application Management System (AMS). This dataset is updated nightly.

This data report provides information on temperature and salinity in the Godbout region of the St. Lawrence Estuary. Sampling was carried out from 2019 to 2021 over an area of <5 km2. The databases provide information on temperature and salinity at an hourly rate for 2 years. The aim of this project is to analyze telemetry data from sea urchins (Strongylocentrotus droebachiensis), snow crabs (Chionoecetes opilio), rock crabs (Cancer irroratus), spider crabs (Hyas spp.) and whelks (Buccinum undatum). This report focuses on the presentation of benthic environmental data collected throughout the study with high spatial and temporal resolution. All reported variables were collected at the seafloor, as the aim of the project was to study the movement of epibenthic species. Temperature data were collected from three devices: telemetry receivers with integrated temperature sensors (InnovaseaTM), HoboTM and Star-OddiTM probes. Temperature data processing involved cleaning up extreme values (below 2°C and above 20°C) and homogenizing the data to fit the bathymetry matrix (1m x 1m cells) of the study site. Temperature data are provided in a NetCDF file with a matrix of the entire study site, where there is a stratum for each hour between August 2019 and October 2021 and in each file, a temperature value for each pixel of the raster. Salinity data were collected from Star-OddiTM probes only. Salinity values were averaged hourly for the entire study area. Salinity data is provided as a CSV file with one salinity value per hour for the entire study area.

The Remote Communities Energy Database is a public resource that provides pertinent factual information about the generation and use of electricity and other energy sources for all remote communities in Canada. Communities are identified as remote communities if they are not currently connected to the North-American electrical grid nor to the piped natural gas network; and is a permanent or long-term (5 years or more) settlement with at least 10 dwellings.The Remote Communities Energy Database is the only national data source on energy in remote communities that is publically available on one centralized site. The Remote Communities Energy Database allows users to search and conduct analyses of remote communities and their energy context. Users are also able download the data from the Remote Communities Energy Database dataset in CSV (i.e., excel compatible) format. This data is collected from a number of sources including the remote communities themselves, local utilities, provincial and territorial government’s, Indigenous and Northern Affairs Canada (INAC), Statistics Canada, Natural Resources Canada (NRCan) and various other stakeholders.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.