Wetlands and areas of influence covered by the Interim Control Regulation (ICR) Nature plan amended by Regulation 1274-2.attributes:cmh_ID - Identifier of the wetland complexType - Wetland or area of influencingInfoCI - Additional information on the Interim Control RegulationsSource: The original delimitation of wetlands comes from Ducks Unlimited Canada and the Department of the Environment and the Fight against Climate Change (MELCC), 2020. Detailed mapping of wetlands in populated areas in southern Quebec. Changes have been made to the source data in order to produce this “RCI Wetlands” data layer.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Climate Normals and Averages are used to summarize or describe the average climatic conditions of a particular location. At the completion of each decade, Environment and Climate Change Canada updates its Climate Normals for as many locations and as many climatic characteristics as possible. The Climate Normals, Averages and Extremes offered here are based on Canadian climate stations with at least 15 years of data between 1981 to 2010.

Aggragation of all groundwater monitoring stations from participating provincial and territorial agencies: - Nova Scotia Environment - Ontario Ministry of the Environment, Conservation and Parks - Alberta Environment and Sustainable Resource Development - Newfoundland and Labrador Department of Environment and Climate Change - Prince Edward Island Department of Environment, Energy and Climate Action - New Brunswick Environment - Quebec Ministère de l'Environnement et de la Lutte contre les changements climatiques - Manitoba Department of Agriculture and Resource Development - Saskatchewan Water Security Agency - British Columbia Ministry of Environment and Climate Change Strategy - Yukon Water Resources Branch of the Department of Environment This web service complies with the OGC's SensorThings API standard and provides access to archives of historical and recent groundwater level measurements from provincial stations.

High resolution forest change for Canada (Binary Change/No-change) 1985-2011The forest change data included in this product is national in scope (entire forested ecosystem) and represents the first wall-to-wall characterization of wildfire and harvest in Canada at a spatial resolution commensurate with human impacts. The information outcomes represent 27 years of stand replacing change in Canada’s forests, derived from a single, consistent spatially-explicit data source, derived in a fully automated manner. This demonstrated capacity to characterize forests at a resolution that captures human impacts is key to establishing a baseline for detailed monitoring of forested ecosystems from management and science perspectives. Time series of Landsat data were used to characterize national trends in stand replacing forest disturbances caused by wildfire and harvest for the period 1985–2011 for Canada's 650 million hectare forested ecosystems (https://authors.elsevier.com/sd/article/S0034425717301360 ). Landsat data has a 30m spatial resolution, so the change information is highly detailed and is commensurate with that of human impacts. These data represent annual stand replacing forest changes. The stand replacing disturbances types labeled are wildfire and harvest, with lower confidence wildfire and harvest, also shared. The distinction and sharing of lower class membership likelihoods is to indicate to users that some change events were more difficult to allocate to a change type, but are generally found to be in the correct category. For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673).The data available is, 1. a binary change/no-change; 2. Change year; and, 3. Change type. When using this data, please cite as: White, J.C., M.A. Wulder, T. Hermosilla, N.C. Coops, and G. Hobart. (2017). A nationwide annual characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sensing of Environment. 192: 303-321. DOI: 10.1016/j.rse.2017.03.035. https://authors.elsevier.com/sd/article/S0034425717301360Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

BC active and discontinued hydrometric stations (surface water level and flow data) that are part of the provincial hydrometric network managed under a national program jointly administered under a federal-provincial cost-sharing agreement with Environment and Climate Change Canada (ECCC).

Significant climate change impacts are highly likely in all Canadian marine and freshwater basins, with effects increasing over time (DFO 2012). Climate models project that ecosystems and fisheries across Canada will be disrupted into the foreseeable future (Lotze et al. 2019; Bryndum-Buchholz et al. 2020; Tittensor et al. 2021; Boyce et al. 2024). Despite its imminence, climate change is infrequently factored into Canada’s primary marine conservation strategies, such as spatial planning (O’Regan et al. 2021) or fisheries management (Boyce et al. 2021; Pepin et al. 2022). The Climate Risk Index for Biodiversity (CRIB) was developed to assess climate risk for marine species in a quantitative, spatially explicit, and scalable manner, supporting climate-informed decision-making. It has been used to evaluate climate risks for marine life globally (Boyce et al. 2022), regionally (Lewis et al. 2023; Boyce et al. 2024; Keen et al. 2023), for fisheries (Boyce et al. 2024), and in support of spatial conservation planning (Keen et al. 2023). This dataset contains climate vulnerability and risk estimates from the CRIB framework adapted to consider warming at both the sea surface and its bottom for 145 marine species of conservation or fisheries interest across Canada’s marine territory. Climate risk is available at a 0.25-degree resolution under two contrasting emission scenarios to 2100. For each species, location, and scenario, 12 climate indexes, three vulnerability dimensions, and an overall vulnerability and risk score are provided. The accompanying report describes the data, methods, and workflow used to calculate risk. This report also guides the interpretation of these data to inform and support climate-informed decision-making in Canada.

This dataset contains the monthly climate normals for Quebec as measured at the stations of the Ministry of the Environment, Fight against Climate Change, Wildlife and Parks.If you have questions about this data, contact the Info-Climat service: [https://www.environnement.gouv.qc.ca/climat/surveillance/produits.htm](https://www.environnement.gouv.qc.ca/climat/surveillance/produits.htm “Info-Climat”)**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

High resolution forest change for Canada (Change Year) 1985-2011The forest change data included in this product is national in scope (entire forested ecosystem) and represents the first wall-to-wall characterization of wildfire and harvest in Canada at a spatial resolution commensurate with human impacts. The information outcomes represent 27 years of stand replacing change in Canada’s forests, derived from a single, consistent spatially-explicit data source, derived in a fully automated manner. This demonstrated capacity to characterize forests at a resolution that captures human impacts is key to establishing a baseline for detailed monitoring of forested ecosystems from management and science perspectives. Time series of Landsat data were used to characterize national trends in stand replacing forest disturbances caused by wildfire and harvest for the period 1985–2011 for Canada's 650 million hectare forested ecosystems (https://authors.elsevier.com/sd/article/S0034425717301360 ). Landsat data has a 30m spatial resolution, so the change information is highly detailed and is commensurate with that of human impacts. These data represent annual stand replacing forest changes. The stand replacing disturbances types labeled are wildfire and harvest, with lower confidence wildfire and harvest, also shared. The distinction and sharing of lower class membership likelihoods is to indicate to users that some change events were more difficult to allocate to a change type, but are generally found to be in the correct category. For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673).The data available is, 1. a binary change/no-change; 2. Change year; and, 3. Change type. When using this data, please cite as: White, J.C., M.A. Wulder, T. Hermosilla, N.C. Coops, and G. Hobart. (2017). A nationwide annual characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sensing of Environment. 192: 303-321. DOI: 10.1016/j.rse.2017.03.035. https://authors.elsevier.com/sd/article/S0034425717301360Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

High resolution forest change for Canada (Change Type) 1985-2011The forest change data included in this product is national in scope (entire forested ecosystem) and represents the first wall-to-wall characterization of wildfire and harvest in Canada at a spatial resolution commensurate with human impacts. The information outcomes represent 27 years of stand replacing change in Canada’s forests, derived from a single, consistent spatially-explicit data source, derived in a fully automated manner. This demonstrated capacity to characterize forests at a resolution that captures human impacts is key to establishing a baseline for detailed monitoring of forested ecosystems from management and science perspectives. Time series of Landsat data were used to characterize national trends in stand replacing forest disturbances caused by wildfire and harvest for the period 1985–2011 for Canada's 650 million hectare forested ecosystems (https://authors.elsevier.com/sd/article/S0034425717301360 ). Landsat data has a 30m spatial resolution, so the change information is highly detailed and is commensurate with that of human impacts. These data represent annual stand replacing forest changes. The stand replacing disturbances types labeled are wildfire and harvest, with lower confidence wildfire and harvest, also shared. The distinction and sharing of lower class membership likelihoods is to indicate to users that some change events were more difficult to allocate to a change type, but are generally found to be in the correct category. For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673).The data available is, 1. a binary change/no-change; 2. Change year; and, 3. Change type. When using this data, please cite as: White, J.C., M.A. Wulder, T. Hermosilla, N.C. Coops, and G. Hobart. (2017). A nationwide annual characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sensing of Environment. 192: 303-321. DOI: 10.1016/j.rse.2017.03.035. https://authors.elsevier.com/sd/article/S0034425717301360Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

In Canada, DFO assessments have reported a high probability of significant climate change impacts in all marine and freshwater basins, with effects increasing over time (DFO 2012a, 2012b), while climate projections indicate that ecosystems and fisheries will be disrupted into the foreseeable future (Lotze et al. 2019b; Bryndum-Buchholz et al. 2020; Tittensor et al. 2021; Boyce et al. 2022c). Despite its imminence, climate change is infrequently factored into Canada’s primary marine conservation strategies, such as spatial planning (O’Regan et al. 2021) or fisheries management (Boyce et al. 2021a; Pepin et al. 2022). The Climate Risk Index for Biodiversity was developed to assess climate risk for marine species in a quantitative, spatially explicit, and scalable way to better support climate-informed decision-making. It has been used to evaluate climate risks for marine life globally (Boyce et al. 2022a), regionally (Lewis et al. 2023), and for fisheries (Boyce et al. 2022c). These data present results from application of the CRIB framework to estimate average climate risks associated with sea surface warming across 2,959 species throughout the Canadian marine territory under contrasting future emission scenarios. In the Technical Report accompanying this data publication, we use Atlantic cod (Gadus morhua) as an example to describe the approach’s data, methods, and outputs, and to transparently and tangibly show how it quantifies risk and can inform and support climate-informed decision-making in Canada. Cite this data as: Boyce, D., Greenan, B., Shackell, N. Data of:A climate risk index for marine life across the Canadian exclusive economic zone.Published: January 2024. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S.https://open.canada.ca/data/en/dataset/2a0b3298-2bcc-49a0-a745-af56ed0462f1