These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

Sub Lea Park Formation Unconformity Structure Map

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

This layer contains polygon features that represent geological units in New Brunswick. The associated Bedrock Geology Relate Table contains details about each map unit, including: a brief legend description, Group name, Formation name, and rock age. This layer is the result of nearly 50 years of bedrock mapping and it continues to change as new interpretations are made and more data is collected through field work and analysis.

The dataset includes subsurface stratigraphic picks for the top of the Oldman Formation (base of the Dinosaur Park Formation) in the Alberta Plains (Townships 1 to 47, Ranges 1W4 to 5W5) made from wireline geophysical well logs. The dataset supplements Alberta Geological Survey Open File Report 2011-13, which describes the methodology used to make the picks. Well data were screened to detect errors resulting from deviated wells, as well as incorrect ground and kelly bushing elevation data. We used statistical methods to identify local and regional statistical outliers, which we examined individually.

This digital data release includes adsorption isotherm and proximate analysis results of selected samples for shale- and siltstone-hosted hydrocarbons. The strata evaluated include the: - basal Banff Formation, - Colorado Group, - Duvernay Formation, - Exshaw Formation, - Montney Formation, - Muskwa Formation, - Wilrich Member, - Nordegg Member, and - Rierdon Formation.

This digital data release includes Rock Eval and total organic carbon results of selected samples for analyses of shale gas, oil and liquids. The strata evaluated include the: - basal Banff Formation, - Colorado Group, - Duvernay Formation, - Exshaw Formation, - Montney Formation, - Muskwa Formation, - Nordegg Member, and - Rierdon Formation.

This dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of the Battle Formation in the Sylvan Lake sub-basin. Bedrock units included in the Sylvan Lake sub-basin model are derived from the Geological Framework of Alberta, a regional geological model of the province. The Top of Battle Formation, provided by the Geological Framework of Alberta, was clipped to the Sylvan Lake sub-basin model domain for integration into a multi-layer hydrostratigraphic model. This dataset supplements Alberta Geological Survey (AGS) Open File Report 2014-10, which includes a full description of the methodology used to produce this grid.

The Village dataset is comprised of all the polygons that represent Villages in Alberta. Village is a municipality type defined under the authority of the Municipal Government Act. The formation of a Village can occur when a majority of the buildings are on parcels of land smaller than 1850 square meters and there is a population of 300 or more.