Flood extent polygons from the last three days in selected Canadian regions that have been designated for observation, monitored by Natural Resources Canada using satellite imagery for emergency response. Coverage is not comprehensive nationwide. In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency geomatics services, may be activated by Canada’s emergency management protocols. As new satellite imagery becomes available, NRCan will extract flood extent polygons and update the dataset in near real time (4 hours). This item contains the latest flood products generated in the past three days. For any data older than 72 hours, please refer to the [Floods in Canada - Current Year](https://open.canada.ca/data/en/dataset/b1afd8d2-6e14-4ec4-9a09-652221a6cb71) entry. Note that the web mapping service may not display data if flood polygons have not been published by the EGS in the past three days. The flood products generated are validated on a best effort basis. Various factors may affect the quality of the flood polygons. These factors include, but are not limited to, sensor type, image resolution, cloud cover or limitations of the flood polygon extraction method. In this layer, where possible, a symbology is applied to the flood polygons based on the underlying land use classification, or is simply unclassified and shows the raw flood extent. When using Web mapping services, to display a specific product, filter by date (UTC Date) and area of interest (AOI). Also, a link to download each product directly is available in the Resources section. This prepackaged and compressed product contains a Shape file, a PDF file and a KMZ file. Disclaimer: Emergency response authorities are the primary users of these satellite-derived open water flood extent map products. These products are generated to provide analysis and emergency response situational awareness and to facilitate decision-making during major flood events. The open water flood extent products are generated rapidly and limited time is available for editing and validation. The flood products reflect the open water flood conditions at the date/time of acquisition. While efforts are made to produce high quality products, near-real time products may contain errors due to the limited time available for vector editing and validation. Please note that current algorithms do not map flooded areas under the forest canopy and are not optimized for urban flood mapping. Limitation of Liability: Accordingly, the information contained on this website is provided on an “as is” basis and Natural Resources Canada makes no representations or warranties respecting the information, either expressed or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. Natural Resources Canada does not assume any liability in respect of any damage or loss based on the use of this website. In no event shall Natural Resources Canada be liable in any way for any direct, indirect, special, incidental, consequential, or other damages based on any use of this website or any other website to which this site is linked, including, without limitation, any lost profits or revenue or business interruption. Parent Collection:- **[Floods in Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/08b810c2-7c81-40f1-adb1-c32c8a2c9f50)**

Flood extent polygons from the current calendar year in selected Canadian regions that have been designated for observation, monitored by Natural Resources Canada using satellite imagery for emergency response. Coverage is not comprehensive nationwide. In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency geomatics services, may be activated by Canada’s emergency management protocols. As new satellite imagery becomes available, NRCan will extract flood extent polygons and update the dataset in near real time (4 hours). This item contains the flood products generated in the past year. For any data relating to previous years, please refer to the [Floods in Canada – Archive]( https://open.canada.ca/data/en/dataset/74144824-206e-4cea-9fb9-72925a128189) entry. Please note that the web mapping service may not display data if flood polygons have not been published by the EGS for the current year. The flood products generated are validated on a best effort basis. Various factors may affect the quality of the flood polygons. These factors include, but are not limited to, sensor type, image resolution, cloud cover or limitations of the flood polygon extraction method. In this layer, where possible, a symbology is applied to the flood polygons based on the underlying land use classification, or is simply unclassified and shows the raw flood extent. When using Web mapping services, to display a specific product, filter by date (UTC Date) and area of interest (AOI). Also, a link to download each product is available in the Resources section. This prepackaged and compressed product contains a Shape file, a PDF file and a KMZ file. Disclaimer : Emergency response authorities are the primary users of these satellite-derived open water flood extent map products. These products are generated to provide analysis and emergency response situational awareness and to facilitate decision-making during major flood events. The open water flood extent products are generated rapidly and limited time is available for editing and validation. The flood products reflect the open water flood conditions at the date/time of acquisition. While efforts are made to produce high quality products, near-real time products may contain errors due to the limited time available for vector editing and validation. Please note that current algorithms do not map flooded areas under the forest canopy and are not optimized for urban flood mapping. Limitation of Liability : Accordingly, the information contained on this website is provided on an “as is” basis and Natural Resources Canada makes no representations or warranties respecting the information, either expressed or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. Natural Resources Canada does not assume any liability in respect of any damage or loss based on the use of this website. In no event shall Natural Resources Canada be liable in any way for any direct, indirect, special, incidental, consequential, or other damages based on any use of this website or any other website to which this site is linked, including, without limitation, any lost profits or revenue or business interruption. Parent Collection:- **[Floods in Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/08b810c2-7c81-40f1-adb1-c32c8a2c9f50)**

Since 1 March 2022, the Special Intervention Zones (ZIS) have been lifted. However, the territory flooded during the exceptional spring floods of 2017 and 2019, as illustrated in Annex 2 adjusted to Decree 814-2019, is considered by the Regulation concerning the provisional implementation of the amendments made by chapter 7 of the laws of 2021 on the management of risks related to floods (Transitional Regulation) as an area comparable to a low-current zone. The adjusted Annex 2 corresponds to the delimitation of the territory flooded during the spring floods of 2017 and 2019 in connection with the decree establishing the ZIS published on 15 July 2019, from which the portions of territory covered by the ministerial orders published on 30 December 2019 were subtracted.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Collection of flood products for active and past floods throughout Canada as monitored by Natural Resources Canada using satellite imagery for emergency response. This collection of cartographic products regroups flood extent polygons and their associated footprints. Three visualization timeframes are available : - **[Active Floods in Canada](https://open.canada.ca/data/en/dataset/9cad712a-5ac5-4248-b7d7-2db1a3892509)** - **[Floods in Canada - Current Year](https://open.canada.ca/data/en/dataset/b1afd8d2-6e14-4ec4-9a09-652221a6cb71)** - **[Floods in Canada - Archive](https://open.canada.ca/data/en/dataset/74144824-206e-4cea-9fb9-72925a128189)**

Following the spring floods at the end of April 2017 on Lake of Two Mountains, Lake Saint-Pierre and the Rivières des Prairies and Mille-Îles that affected the regions of Montérégie, Laurentides, Mauricie, Montréal and Laval, geomatic data (e.g. satellite images) were captured to document these floods, which exceeded the recurrence of 100 years. At the peak of the flood, on May 8, Lac des Deux Montagnes reached a level of 24.78m at station 043108 of the Ministry of Sustainable Development, Environment and the Fight against Climate Change (MDDELCC), the Rivière des Prairies reached a flow of 3400 m3/s at station 0433/s at station 043301 of the MDDELCC and the Rivière des Mille-Îles reached 1081 m3/s at station 02OA0S 13 from Environment and Climate Change Canada (ECCC). on the Ottawa River, the flow at Carillon reached a peak of 8900 m3/s**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Flood risk areas display the extent of known historical flood events as well as areas that have a probability of flooding as determined from historical records.The polygon data includes the description of the flood event, the typical causes of the flood and any associated place name keys.The line data indicates the limits of the flood risk mapping information and the 2008 and 2018 flood data.Flood extents for the 2008 and 2018 Lower Saint John River floods are included.

During flooding episodes, areas may be flooded even though the cartography established does not indicate that they are located in flood zones. This situation can occur when the water levels reached exceed those represented on the map or when floods affect areas that have not yet been studied. These cartographic data correspond to the delimitation of these territories and are used to produce event maps of these floods. __To date, the following sectors have been maped:__ * Lac-Saint-Jean (2022) * Lac-Saint-Jean (2022) * Saint-Maurice River (2022) Photogrammetric capture, allowing the delimitation of these territories, was carried out following the farthest limit reached by the waters from aerial photographs taken during the floods. It should be noted that this work is part of measure 4 of __ [Plan for the protection of the territory against floods (PPTFI)] (https://www.quebec.ca/gouvernement/politiques-orientations/plan-de-protection-du-territoire-face-aux-inondations)__.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Flood extent polygons from past years in selected Canadian regions that have been designated for observation, monitored by Natural Resources Canada using satellite imagery for emergency response. Coverage is not comprehensive nationwide.In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency geomatics services, may be activated by Canada’s emergency management protocols. As new satellite imagery becomes available, NRCan will extract flood extent polygons and update the dataset in near real time (4 hours). This item contains the complete archive of all flood products generated since 2005, by NRCan's emergency geomatics services. For any data to the current year, please refer to the catalogue entry entitled: [Floods in Canada – Current]( https://open.canada.ca/data/en/dataset/b1afd8d2-6e14-4ec4-9a09-652221a6cb71).The flood products generated are validated on a best effort basis. Various factors may affect the quality of the flood polygons. These factors include, but are not limited to, sensor type, image resolution, cloud cover or limitations of the flood polygon extraction method. In this layer, where possible, a symbology is applied to the flood polygons based on the underlying land use classification, or is simply unclassified and shows the raw flood extent. When using Web mapping services, to display a specific product, filter by date (UTC Date) and area of interest (AOI). Also, a link to download each product directly from the FTP site is available in the Resources section. This prepackaged and compressed product contains a Shape file, a PDF file and a KMZ file. For more information on past flooding events, please refer to the catalog entry entitled: [Historical Flood Events (HFE)](https://geo.ca/flood-mapping/flood-map-gallery/historical-flood-events/) Disclaimer: Emergency response authorities are the primary users of these satellite-derived open water flood extent map products. These products are generated to provide analysis and emergency response situational awareness and to facilitate decision-making during major flood events. The open water flood extent products are generated rapidly and limited time is available for editing and validation. The flood products reflect the open water flood conditions at the date/time of acquisition. While efforts are made to produce high quality products, near-real time products may contain errors due to the limited time available for vector editing and validation. Please note that current algorithms do not map flooded areas under the forest canopy and are not optimized for urban flood mapping. Limitation of Liability: Accordingly, the information contained on this website is provided on an “as is” basis and Natural Resources Canada makes no representations or warranties respecting the information, either expressed or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. Natural Resources Canada does not assume any liability in respect of any damage or loss based on the use of this website. In no event shall Natural Resources Canada be liable in any way for any direct, indirect, special, incidental, consequential, or other damages based on any use of this website or any other website to which this site is linked, including, without limitation, any lost profits or revenue or business interruption. Parent Collection:- **[Floods in Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/08b810c2-7c81-40f1-adb1-c32c8a2c9f50)**

Representation of the causes of flooding events in the form of multiple points. The point groupings correspond to the set of locations that were affected by the same event. The inventory of past flooding events was compiled from various public sources and standardized into a common data model. Sources used are included in the data. Event locations have been extensively revised to have one location per location reported as affected by the flood. Flood events for which no location was included in the sources used are positioned on the place name of the location affected by the flood. The event positions do not indicate where the flooding occurred. Flood events that affected more than one locality are represented by a multipoint.For each event after January 1, 1980 caused by a heavy rainfall or a coastal storm , a precipitation analysis document, a precipitation animation and the precipitation data are available. These documents are the result of a collaboration with Environment and Climate Change Canada.Disclaimer:It should be noted that no consultation was conducted with the various providers and stakeholders of the historic flood data. Disparities in content among the various sources result in an incomlete product. No warranty is given as to the accuracy or completeness of the information provided. The absence of information does not mean that no flooding has occurred.

This national map of flood susceptibility or flood prone areas is based on patterns of historic flood events as predicted by an ensemble machine learning model.The recommended use is national, provincial or regional scale and can be used as a guide for identifying areas for further investigation. The Flood Susceptibility Index (FSI) Dataset, while processed and available at 30m cell size, is not recommended for use at the pixel or street level, given the uncertainty in the modelling process and the variability of results as discussed in https://www.mdpi.com/2673-4931/25/1/18 .For additional details on the methods, tests, models and datasets used to generate this data layer, please see https://geoscan.nrcan.gc.ca/starweb/geoscan/servlet.starweb?path=geoscan/fulle.web&search1=R=329493