An administrative unit of forest land designated by the Minister, as authorized under Section 14(1) of the Forests Act.

The Forest Protection Area dataset is comprised of all the polygons that represent the administrative areas established by Forest Protection, Forestry Division of Alberta Agriculture and Forestry concerned with the prevention and control of damage to forests from fire, insects, disease and other harmful agents.

The purpose of this feature class is to identify the individual annual allowable cut and annual limit areas as referred to in the Forest Resources Act subsection 20(2) and 31(10 of the Forest Resources Regulation). Where there is no approved Forest Resources Management Plan (FRMP) for an area, forest resources harvesting can only be authorized in an amount less than that prescribed by regulation for that area. The Forest Resources Regulation subsection 31(1) establishes the annual limits for harvesting timber resources for areas without an FRMP. These areas are referred to as the Annual Limit Regions in Schedule 1 of the Regulation titled Timber Harvesting Areas. These annual limits are set as the annual allowable cut for each of the areas, until such time as a Forest Resources Management Plan is approved for that area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

FADM BCTS AREA SP is a BC Timbers Sales Business Area - an administrative area established by the Ministry (The Forest Act), and establishes the BC Timber Sales Program management Unit

This feature class identifies active areas designated for personal use woodcutting where harvesting dead or downed fuelwood can occur for purposes such as home heating. Certain areas have seasonal restrictions or additional terms and conditions. A forest resources permit is required to cut in these areas; this free permit authorizes a limit of 25m 3 (11 cords) of firewood. Failure to have a permit or carry it with you when cutting could result in enforcement action.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This feature class represents Manitoba's Forest Management Licence (FML) boundaries.The Forest Act provides for the establishment of Forest Management Licences to provide a continuous supply of timber to the forest industry. A Forest Management Licence, granted for a period of not more than twenty years, may be renewed for further periods. The Forest Management Licence describes the land upon which trees may be cut, the volume of wood that may be harvested, and other terms and conditions. There are currently two Forest Management Licences in Manitoba, FML-2 and FML-3 . Timber management and forest renewal are the responsibilities of Manitoba Sustainable Government on Crown Forest Land outside of Forest Management Licence areas, and within Forest Management Licence areas where the wood is used by a facility other than that operated by the Forest Management Licensee. Version 3 of Manitoba's Forest Management Licence (FML) boundaries includes FML-2 and FML-3. Previous boundaries associated with FML-1 and IWSA's have been removed. To update and improve the positional accuracy of Manitoba's Forest Management Licence (FML) boundaries, written descriptions of FML areas were referenced along with linework from Forest Land Inventories (FLI), Forest Resource Inventories (FRI) and Manitoba's township fabric to improve Provincial FML boundaries. Boundary linework the following related geospatial datasets were topologically checked for coincident linework: Manitoba Provincial Boundary; Manitoba Forest Management Units ; Manitoba Forest Management Licence Agreement Areas; Manitoba Forest Sections; Manitoba Provincial Forests . Fields Included: FML_NAME : Forest Management Licence area name.

Represents timber supply area and other land use boundaries in the province of Saskatchewan. Timber supply areas are the primary management unit used for the allocation of timber harvest, licensing, forest management planning and harvest volume schedules.The Saskatchewan Ministry of Environment regulates forestry activities on Crown “forest lands” — as defined by The Forest Resources Management Act — using several types of licenses and permits:  Forest Management Agreement (FMA)A forest management agreement is a 20-year agreement, typically with a larger forest company, conferring long-term harvesting rights for a specific volume of timber from a defined area, as well as responsibilities for long-term sustainable forest management. Term Supply Licence (TSL)A term supply licence (TSL) is a licence with a term of up to 10 years, granting rights to harvest specified forest volumes as well as responsibilities for forest management. A TSL may be volume-based or area-based.  Forest Product Permit (FPP)A forest product permit grants the right to harvest specified forest products for a term of up to one year. This permit is also used to regulate other activities, such as grazing in the forest. Land use is classified into three categories:  Commercial ForestAreas within the provincial forest that are available for commercial timber harvest allocation through the use of forest management agreements (FMA), volume-based or area-based term supply licences (TSL), or forest product permits (FPP).  Fringe ForestAreas, generally south of the provincial forest, that contain “forest lands” — as defined by The Forest Resources Management Act. Within the fringe forest, harvest allocations are administered by the Ministry of Environment through the use of forest product permits and volume-based term supply licenses.  Other UsesAreas within the provincial forest that are not available or suitable for forestry activities. These include protected areas and areas generally north of the commercial forest.  For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. Commercial forest and fringe forest areas are sub-divided into timber supply areas. Forest Names and Licence Holders are current as of August 31, 2020.

Manitoba's Forest Management Licence Area (FML) Boundaries – Version 4.The Forest Act provides for the establishment of Forest Management Licences to provide a continuous supply of timber to the forest industry. A Forest Management Licence, granted for a period of not more than 20 years, may be renewed for further periods. The Forest Management Licence describes the land upon which trees may be cut, the volume of wood that may be harvested, and other terms and conditions. There are currently three Forest Management Licences in Manitoba. Timber management and forest renewal are the responsibilities of Manitoba Conservation on Crown Forest Land outside of Forest Management Licence areas, and within Forest Management Licence areas where the wood is used by a facility other than that operated by the Forest Management Licensee. Version 4 of Manitoba's Forest Management Licence (FML) boundaries incorporates minor edits made to the BDY_MB_FMU_PY feature class, ensuring coincident line work with the provincial boundary and provincial forests. Version 3 of Manitoba's Forest Management Licence (FML) boundaries includes FML-2 and FML-3. Previous boundaries associated with FML-1 and IWSAs have been removed. To update and improve the positional accuracy of Manitoba's Forest Management Licence (FML) boundaries, written descriptions of FML areas were referenced along with line work from Forest Land Inventories (FLI), Forest Resource Inventories (FRI) and Manitoba's township fabric to improve p rovincial FML boundaries. Boundary line work for all of the following feature classes were topologically checked for coincident line work: 1. BDY_MB_FMU_PY (Provincial FMUs); 2. Provincial Boundary; 3. BDY_MB_FML_PY (Provincial Forest Management Licence Areas); 4. BDY_MB_FOREST_SECTION_PY (Provincial Forest Sections); 5. BDY_MB_PROV_FOREST_PY (Provincial Forests)   The dataset includes the following fields /Les ensembles de données comprennent les champs suivants Name / Nom Alias Description FML FML Forest Management Licence Area number Numéro de zone de gestion forestière visée par une licence FML_NAME FML Name / Nom Forest Management Licence Area name Nom de zone de gestion forestière visée par une licence AREA_HA Area / Surface (Hectares) Area in hectares La surface en hectares   Limites des zones de gestion forestière du Manitoba visées par une licence – Version 4

The spatial representation of a Forest Stewardship Plan and Forest Development Units. A Forest Stewardship Plan is a plan submitted by a forest industry licensee stating how the BC Government's objectives for managing the province's forest resources will be met. It identifies the plan-holder's obligations for a five-year period. The Forest Development Unit is the spatially-mapped area of land within a Forest Stewardship Plan where specific forest practices obligations apply to specific forest licensees.

The spatial representation for a Forest Addition, which is any Forest land that is to be designated by the Lieutenant Governor, into an established forest, to be managed and used for the social and economic benefit of the Province