This dataset covers Forest Resource Inventories between 2001 and 2004. It includes: * stand regeneration * harvested trees * trees lost to wildfire, insects, disease or wind damage Information from forest resource inventories provides the basis for major forest resource planning and ministry policy decisions.

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).

The Forest Resources Inventory (FRI) provides information about tree species, including: * composition * height * age * density Ontario’s forest resource inventories allow us to support resource management and land use decisions, and help sustain healthy, natural environments. Forest resource inventories for each forest management unit are legally required under the [Crown Forest Sustainability Act (1994)](https://www.ontario.ca/laws/statute/94c25). Every 10 years, the ministry creates a new forest management plan where inventory data is updated and must be compliant with the requirements detailed in the Act. Ontario’s FRI is also used to meet provincial, federal, and international reporting requirements. These draft FRI Packaged Product data sets are being provided for the purpose of consultation and product development. The number of attributes and the algorithms used to generate the attribute as well as the data formats will change over time and should not be considered the final version. A final version of the structure and content of the FRI will be made available after the required consultations are complete. Data sets will be made available for each Forest Management Unit as they are produced. For more information on the FRI please see: [https://www.ontario.ca/page/forest-resources-inventory](https://www.ontario.ca/page/forest-resources-inventory)

This dataset represents Manitoba's digital forest inventory for the 1970s. Please note that because of data capture techniques used for this inventory, its base features (e.g., water, roads) may not align with other datasets (e.g., Google Maps, Esri Basemaps). │ This dataset represents Manitoba's digital forest inventory for the 1970s. Please note that due to the data entry techniques used for this inventory, basic characteristics (e.g., water, roads) may not match other data sets (e.g., Google Maps, Esri Basemaps).This dataset represents Manitoba's digital forest inventory for the 1970s. It was created from forest inventories captured by photo-interpretation during different time periods in the 1970s. It consists of original inventory polygons without any subsequent modifications, such as disturbances or silvicultural activities. Please note that, because of data capture techniques used for this inventory, its base features (e.g., water, roads) may not align with other datasets (e.g., Google Maps, Esri Basemaps) .This dataset covers a large portion of the middle of Manitoba, and is almost exclusively within the Boreal Plains and Boreal Shield ecozones. Forest inventories created in the 1970s used the Forest Resource Inventory (FRI) standards to capture details about the land base relevant to forestry, along with non-forest base features. Data collected in the FRI standard included, among other things, tree species composition, tree species composition, site class (site growing conditions), cutting class (stand maturity, and a proxy for age), crown closure and productivity. This dataset also includes estimated age and year of photography attributes.This feature class is also available for download from DataMB. Metadata: Manitoba Forest Inventory —1970s | This dataset represents Manitoba's digital forest inventory for the 1970s. It was created from forest inventories captured by photo-interpretation at various periods in the 1970s. These are the original inventory polygons, without any subsequent changes, such as disturbances or silvicultural activities. Please note that due to the data entry techniques used for this inventory, the basic characteristics (e.g., water, roads) may not match other data sets (e.g., Google Maps, Esri Basemaps) .This dataset covers a large portion of central Manitoba and is located almost exclusively in the Boreal Plains and Boreal Shield ecozones. Forest inventories created in the 1970s used Forest Resources Inventory (IRF) standards to capture land base details relevant to forestry, as well as characteristics of the non-forest land base. Data collected under the IRF standard included, among other things, tree species composition, site class (site growth conditions), stand operational class (stand maturity and age approximation), canopy closure, and productivity, among others. This data set also includes attributes such as the estimated age and year of the photo.This feature class can also be downloaded from MB Data.Metadata: Manitoba Forest Inventory — 1970s**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This feature class represents Manitoba's Forest Management Licence (FML) boundaries.The Forest Act provides for the establishment of Forest Management Licences to provide a continuous supply of timber to the forest industry. A Forest Management Licence, granted for a period of not more than twenty years, may be renewed for further periods. The Forest Management Licence describes the land upon which trees may be cut, the volume of wood that may be harvested, and other terms and conditions. There are currently two Forest Management Licences in Manitoba, FML-2 and FML-3 . Timber management and forest renewal are the responsibilities of Manitoba Sustainable Government on Crown Forest Land outside of Forest Management Licence areas, and within Forest Management Licence areas where the wood is used by a facility other than that operated by the Forest Management Licensee. Version 3 of Manitoba's Forest Management Licence (FML) boundaries includes FML-2 and FML-3. Previous boundaries associated with FML-1 and IWSA's have been removed. To update and improve the positional accuracy of Manitoba's Forest Management Licence (FML) boundaries, written descriptions of FML areas were referenced along with linework from Forest Land Inventories (FLI), Forest Resource Inventories (FRI) and Manitoba's township fabric to improve Provincial FML boundaries. Boundary linework the following related geospatial datasets were topologically checked for coincident linework: Manitoba Provincial Boundary; Manitoba Forest Management Units ; Manitoba Forest Management Licence Agreement Areas; Manitoba Forest Sections; Manitoba Provincial Forests . Fields Included: FML_NAME : Forest Management Licence area name.

RESULTS opening's forest cover polygons with inventory component provided. Current forest cover submissions into RESULTS must contain attribute and map information. However, there are historical forest cover polygon information where maps are not available. Forest Cover is provided at three critical milestones of at harvesting, at achieved regeneration and at free growing. This is part of the Silviculture and Land status Tracking dataset, which includes tracking achievement of silviculture obligations on Crown Land

Manitoba's Forest Management Licence Area (FML) Boundaries – Version 4.The Forest Act provides for the establishment of Forest Management Licences to provide a continuous supply of timber to the forest industry. A Forest Management Licence, granted for a period of not more than 20 years, may be renewed for further periods. The Forest Management Licence describes the land upon which trees may be cut, the volume of wood that may be harvested, and other terms and conditions. There are currently three Forest Management Licences in Manitoba. Timber management and forest renewal are the responsibilities of Manitoba Conservation on Crown Forest Land outside of Forest Management Licence areas, and within Forest Management Licence areas where the wood is used by a facility other than that operated by the Forest Management Licensee. Version 4 of Manitoba's Forest Management Licence (FML) boundaries incorporates minor edits made to the BDY_MB_FMU_PY feature class, ensuring coincident line work with the provincial boundary and provincial forests. Version 3 of Manitoba's Forest Management Licence (FML) boundaries includes FML-2 and FML-3. Previous boundaries associated with FML-1 and IWSAs have been removed. To update and improve the positional accuracy of Manitoba's Forest Management Licence (FML) boundaries, written descriptions of FML areas were referenced along with line work from Forest Land Inventories (FLI), Forest Resource Inventories (FRI) and Manitoba's township fabric to improve p rovincial FML boundaries. Boundary line work for all of the following feature classes were topologically checked for coincident line work: 1. BDY_MB_FMU_PY (Provincial FMUs); 2. Provincial Boundary; 3. BDY_MB_FML_PY (Provincial Forest Management Licence Areas); 4. BDY_MB_FOREST_SECTION_PY (Provincial Forest Sections); 5. BDY_MB_PROV_FOREST_PY (Provincial Forests)   The dataset includes the following fields /Les ensembles de données comprennent les champs suivants Name / Nom Alias Description FML FML Forest Management Licence Area number Numéro de zone de gestion forestière visée par une licence FML_NAME FML Name / Nom Forest Management Licence Area name Nom de zone de gestion forestière visée par une licence AREA_HA Area / Surface (Hectares) Area in hectares La surface en hectares   Limites des zones de gestion forestière du Manitoba visées par une licence – Version 4

This feature class represents Manitoba's Forest Management Unit (FMU) boundaries.Forest Management Units (FMU's) define a forested area with common forest conditions that are managed in a similar manner. Forest Sections are comprised of FMU's. Forest inventories within Forest Management Units are analysed to determine allowable harvest limits of softwood and hardwood tree species within each Forest Management Unit. Version 3: The southern portion of FMU 67 within the Highrock Forest Section has been adjusted to align with base features captured in 2009. Additionally, an 11 hectare portion of the Saskatchewan River Forest Section (FMU 59) has been added to the Highrock Forest Section. Version 4: The northern portion of FMU 68 along the Rail Haul within the Highrock Forest Section has been adjust so that the boundary falls within water only. Additionally, version 4 splits the 'White Zone' forest section (FMU 76) by ecozones, creating FMU 76 (Taiga Shield), FMU 77 (Southern Arctic), FMU 78 (Hudson Plain) and FMU 79 (Boreal Shield). Version 4 is dated February 8, 2013. Fields Included: OBJECTID: Sequential unique whole numbers that are automatically generated . MANAGEMENT_UNIT_NUMBER : Management Unit (MU) number . S ECTION : Forest section number . SECTION_NAME : Forest section name .

This publication contains thirteen (13) maps of different biogeochemical and soil properties of forest ecosystems of Canada’s managed forest. A scientific article gives additional details on the methodology: Paré, D., Manka, F., Barrette, J., Augustin, F., Beguin, J. 2021. Indicators of site sensitivity to the removal of forest harvest residues at the sub-continental scale: mapping, comparisons, and challenges. Ecol. Indicators. https://dx.doi.org/10.1016/j.ecolind.2021.107516

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).