This division defines the forests attributable to the domain of the State, where it is allowed to manage Quebec forests in a sustainable and continuous manner. Beyond this limit, no forest management will be authorized by the Ministry, except for activities specific to local communities. This new route, adopted on October 4, 2016, has been in force since April 1, 2018, and is regulated by the Sustainable Forest Development Act (LADTF, chapter A-18.1, section 15). This applies to the new division of planning units (UA), which has also been in force since 1 April 2018.This data comes from the MRNF STF system, the __official source__ of this geographic information.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The purpose of this feature class is to identify the individual annual allowable cut and annual limit areas as referred to in the Forest Resources Act subsection 20(2) and 31(10 of the Forest Resources Regulation). Where there is no approved Forest Resources Management Plan (FRMP) for an area, forest resources harvesting can only be authorized in an amount less than that prescribed by regulation for that area. The Forest Resources Regulation subsection 31(1) establishes the annual limits for harvesting timber resources for areas without an FRMP. These areas are referred to as the Annual Limit Regions in Schedule 1 of the Regulation titled Timber Harvesting Areas. These annual limits are set as the annual allowable cut for each of the areas, until such time as a Forest Resources Management Plan is approved for that area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The spatial representation of a Forest Stewardship Plan and Forest Development Units. A Forest Stewardship Plan is a plan submitted by a forest industry licensee stating how the BC Government's objectives for managing the province's forest resources will be met. It identifies the plan-holder's obligations for a five-year period. The Forest Development Unit is the spatially-mapped area of land within a Forest Stewardship Plan where specific forest practices obligations apply to specific forest licensees.

Territorial limit of the City of Longueuil.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).

Represents timber supply area and other land use boundaries in the province of Saskatchewan. Timber supply areas are the primary management unit used for the allocation of timber harvest, licensing, forest management planning and harvest volume schedules.The Saskatchewan Ministry of Environment regulates forestry activities on Crown “forest lands” — as defined by The Forest Resources Management Act — using several types of licenses and permits:  Forest Management Agreement (FMA)A forest management agreement is a 20-year agreement, typically with a larger forest company, conferring long-term harvesting rights for a specific volume of timber from a defined area, as well as responsibilities for long-term sustainable forest management. Term Supply Licence (TSL)A term supply licence (TSL) is a licence with a term of up to 10 years, granting rights to harvest specified forest volumes as well as responsibilities for forest management. A TSL may be volume-based or area-based.  Forest Product Permit (FPP)A forest product permit grants the right to harvest specified forest products for a term of up to one year. This permit is also used to regulate other activities, such as grazing in the forest. Land use is classified into three categories:  Commercial ForestAreas within the provincial forest that are available for commercial timber harvest allocation through the use of forest management agreements (FMA), volume-based or area-based term supply licences (TSL), or forest product permits (FPP).  Fringe ForestAreas, generally south of the provincial forest, that contain “forest lands” — as defined by The Forest Resources Management Act. Within the fringe forest, harvest allocations are administered by the Ministry of Environment through the use of forest product permits and volume-based term supply licenses.  Other UsesAreas within the provincial forest that are not available or suitable for forestry activities. These include protected areas and areas generally north of the commercial forest.  For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. Commercial forest and fringe forest areas are sub-divided into timber supply areas. Forest Names and Licence Holders are current as of August 31, 2020.

This product integrates all the boundaries of public forest territory: according to the Law on Sustainable Forest Land Management (LADTF), the public forest territory consists of management units (UA), local forests (FP), residual forest territories (TFR), residual forest territories (TFR), forests for education and research (FR), forests for education and research (FER), forests for education and research (FER), the Duchesnay forest station, experimental forests (FE), exceptional forest ecosystems (FR), exceptional forest ecosystems (FR), EFE), biological refuges. Depending on the type of territory, rights may be granted under specific conditions and/or excluded from all forest management activities. The mapping of these public forest territories is necessary for several MRNF mandates including the determination of forest opportunities, the allocation of wood volumes and finally the planning and monitoring of forest management works.In addition to these territories and rights granted, there are forest administrative boundaries that are in force at the MRNF, such as private forest development agencies, pricing zones, management units (UGs), territories of analysis of the Chief Forester (FEC), etc.This product is maintained in the MRNF STF system and several official entities of the Ministry have their origins in it. For more information on how to do this, please consult the lexicon that accompanies the datasets.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The spatial representation for a Forest Addition, which is any Forest land that is to be designated by the Lieutenant Governor, into an established forest, to be managed and used for the social and economic benefit of the Province

This feature class represents Manitoba's Forest Management Licence (FML) boundaries.The Forest Act provides for the establishment of Forest Management Licences to provide a continuous supply of timber to the forest industry. A Forest Management Licence, granted for a period of not more than twenty years, may be renewed for further periods. The Forest Management Licence describes the land upon which trees may be cut, the volume of wood that may be harvested, and other terms and conditions. There are currently two Forest Management Licences in Manitoba, FML-2 and FML-3 . Timber management and forest renewal are the responsibilities of Manitoba Sustainable Government on Crown Forest Land outside of Forest Management Licence areas, and within Forest Management Licence areas where the wood is used by a facility other than that operated by the Forest Management Licensee. Version 3 of Manitoba's Forest Management Licence (FML) boundaries includes FML-2 and FML-3. Previous boundaries associated with FML-1 and IWSA's have been removed. To update and improve the positional accuracy of Manitoba's Forest Management Licence (FML) boundaries, written descriptions of FML areas were referenced along with linework from Forest Land Inventories (FLI), Forest Resource Inventories (FRI) and Manitoba's township fabric to improve Provincial FML boundaries. Boundary linework the following related geospatial datasets were topologically checked for coincident linework: Manitoba Provincial Boundary; Manitoba Forest Management Units ; Manitoba Forest Management Licence Agreement Areas; Manitoba Forest Sections; Manitoba Provincial Forests . Fields Included: FML_NAME : Forest Management Licence area name.