The lobster recruitment project is run by the Fishermen and Scientist Research Society (FSRS) through DFO funding. Fishermen participating in the lobster recruitment project collect information about lobster in their fishing area by fishing 2-5 scientific project traps (SPTs) (fished in fixed locations) within the regular commercial season. The SPTs used in all fishing areas are smaller than commercial traps and designed to primarily catch juvenile lobsters below the legal-size limit.These traps are additional to the vessel's legal number of commercial traps. The lobster recruitment project has more than 120 fishers participating from all LFAs along the Atlantic coast of Nova Scotia from LFA 27 in Cape Breton to LFA 35 in the Bay of Fundy (excluding LFA 28, who have not participated to-date).The number of fishermen per LFA and number of SPTs per fisherman are decided on by the LFA Advisory Committees. This decision considers how much additional effort they were comfortable having in the LFA (i.e. number of SPTs) and from how many traps each fisher could be reasonably expected to collect data. It is also important to have fishers dispersed enough to maximize study footprint. DFO Science consults on project design. SAMPLING METHODS: The fishers record the number, sex and length of lobsters captured in each SPT, as well as presence of eggs, tags or v-notch. Bottom temperatures are monitored by placing a temperature recorder in one of their SPTs for the entire lobster season.Cite this data as: Tibbets-Scott, S., Zisserson, B. Data of: Fishermen and Scientist Research Society (FSRS) Lobster Recruitment Trap Project. Published: November 2020. Population Ecology Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/a88f9b4d-b59a-44f6-ae7e-d36550266940

Mean Temperature Difference From Normal values are computed by subtracting the normal monthly average temperature from the average monthly temperature of the month. The average monthly temperature is computed by obtaining the mean value of average daily temperatures for a month. If the month was colder than normal the value computed will be negative and if it was warmer the value will be positive.

Fire weather refers to weather conditions that are conducive to fire. These conditions determine the fire season, which is the period(s) of the year during which fires are likely to start, spread and do sufficient damage to warrant organized fire suppression.The length of fire season is the difference between the start- and end-of-fire-season dates. These are defined by the Canadian Forest Fire Weather Index (FWI; http://cwfis.cfs.nrcan.gc.ca/) start-up and end dates. Start-up occurs when the station has been snow-free for 3 consecutive days, with noon temperatures of at least 12°C. For stations that do not report significant snow cover during the winter (i.e., less than 10 cm or snow-free for 75% of the days in January and February), start-up occurs when the mean daily temperature has been 6°C or higher for 3 consecutive days. The fire season ends with the onset of winter, generally following 7 consecutive days of snow cover. If there are no snow data, shutdown occurs following 7 consecutive days with noon temperatures lower than or equal to 5°C.Historical climate conditions were derived from the 1981–2010 Canadian Climate Normals. Future projections were computed using two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: difference in projected fire season length for the medium-term (2041-2070) under the RCP 8.5 (continued emissions increases) compared to reference period across Canada.

Fire weather refers to weather conditions that are conducive to fire. These conditions determine the fire season, which is the period(s) of the year during which fires are likely to start, spread and do sufficient damage to warrant organized fire suppression.The length of fire season is the difference between the start- and end-of-fire-season dates. These are defined by the Canadian Forest Fire Weather Index (FWI; http://cwfis.cfs.nrcan.gc.ca/) start-up and end dates. Start-up occurs when the station has been snow-free for 3 consecutive days, with noon temperatures of at least 12°C. For stations that do not report significant snow cover during the winter (i.e., less than 10 cm or snow-free for 75% of the days in January and February), start-up occurs when the mean daily temperature has been 6°C or higher for 3 consecutive days. The fire season ends with the onset of winter, generally following 7 consecutive days of snow cover. If there are no snow data, shutdown occurs following 7 consecutive days with noon temperatures lower than or equal to 5°C.Historical climate conditions were derived from the 1981–2010 Canadian Climate Normals. Future projections were computed using two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: difference in projected fire season length for the long-term (2071-2100) under the RCP 8.5 (continued emissions increases) compared to reference period across Canada.

A research survey on snow crab (Chionoecetes opilio) was conducted from May 2006 to May 2009 in the Bay of Ste. Marguerite near Sept-Îles, Quebec. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 79 stations, between 7 to 198 meters depth. Specimens were collected using a beam trawl. The codend was lined with a small stretched mesh net in order to harvest the small individuals. The hauls were made at a target duration of 15 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Bernard Sainte-Marie (Bernard.Sainte-Marie@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.

The Canadian Aquatic Biomonitoring Network (CABIN) is an aquatic biomonitoring program for assessing the health of fresh water ecosystems in Canada. Benthic macroinvertebrates are collected at a site location and their counts are used as an indicator of the health of that water body. CABIN is based on the network of networks approach that promotes inter-agency collaboration and data-sharing to achieve consistent and comparable reporting on fresh water quality and aquatic ecosystem conditions in Canada. The program is maintained by Environment and Climate Change Canada (ECCC) to support the collection, assessment, reporting and distribution of biological monitoring information. A set of nationally standardized CABIN protocols are used for field collection, laboratory work, and analysis of biological monitoring data. A training program is available to certify participants in the standard protocols. There are two types of sites in the CABIN database (reference and test). Reference sites represent habitats that are closest to “natural” before any human impact. The data from reference sites are used to create reference models that CABIN partners use to evaluate their test sites in an approach known as the Reference Condition Approach (RCA). Using the RCA models, CABIN partners match their test sites to groups of reference sites on similar habitats and compare the observed macroinvertebrate communities. The extent of the differences between the test site communities and the reference site communities allows CABIN partners to estimate the severity of the impacts at those locations. CABIN samples have been collected since 1987 and are organized in the database by study (partner project). The data is delineated by the 11 major drainage areas (MDA) found in Canada and each one has a corresponding study, habitat and benthic invertebrate data file. Links to auxiliary water quality data are provided when available. Visits may be conducted at the same location over time with repeat site visits being identified by identical study name / site code with different dates. All data collected by the federal government is available on Open Data and more partners are adding their data continually. The csv files are updated monthly. Contact the CABIN study authority to request permission to access non open data.

Get data on Lake Ontario tagged Atlantic salmon recaptures. This dataset represents tagged adult Atlantic salmon that were released and then recaptured by anglers. These fish were used as brood stock (breeding) in the Ministry of Natural Resources and Forestry’s fish culture program. All fish were tagged with a streamer tag near the dorsal fin. Each tag has a unique number and a phone number so anglers can call and let the ministry know about their catch. The data includes: * tagging date * recapture date * tag number/colour * location released * location recaptured * days since released * distance travelled

Basic biological data for all fish caught during the 2012 BSMFP expedition. Includes identification, weight, length (total, fork, and, standard), liver weight, gonad weight, sex and maturity level.

The Fish and Wildlife Development Fund (FWDF) was developed to manage, preserve and enhance fish and wildlife habitat in Saskatchewan. The fund has three fish and wildlife management goals: Maintain natural habitat through conservation, biodiversity, land management and awareness of rare species; Maintain and grow sustainable fish populations and fish habitat; and Maintain game populations and ensure accessible hunting.Thirty per cent of the revenue from all hunting, angling and trapping licence sales is contributed to the fund. Additionally, monetary contributions to the fund can be made through your Hunting, Angling and Trapping Licence (HAL) system account. You can also help support the sustainable management and use of fish and wildlife resources by:Supporting programs that conserve wildlife and fisheries habitat;Joining or supporting your local conservation group or wildlife federation;Planting shelterbelts (using native fruit-bearing species), protecting wetlands, including their riparian areas;Maintaining large or small natural areas; andEnsuring your activities on the landscape do not contribute to the introduction or spread of invasive species. landscape do not contribute to the introduction or spread of invasive species.

A research survey on snow crab (Chionoecetes opilio) was conducted from July 7 to July 26, 2019 in the Estuary St. Lawrence River between Forestville, Baie-Comeau and Matane. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 66 stations, between 31 and 279 meters depth. Specimens were collected using a beam trawl with a total width of 2.8 meters and a total height of 0.76 meters. The codend was lined with a 16 millimeter stretched mesh net in order to harvest the small individuals. The hauls were made at a target speed of 2 knots and a target duration of 15 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The average tow distance was approximately 25 m. The area covered at each tow was the product of the trawl opening and the distance traveled.The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Cedric Juillet (cedric.juillet@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.